scholarly journals Ball-Milling Promoted Monobromination Reactions: One-pot Regioselective Synthesis of Aryl Bromides and α-Bromoketones by NBS and Recyclable MCM-41-SO3H at Room Temperature

SynOpen ◽  
2017 ◽  
Vol 01 (01) ◽  
pp. 0143-0146
Author(s):  
N. Ghanbari ◽  
H. Ghafuri ◽  
H. Zand ◽  
M. Eslami
Keyword(s):  
Ionic Liquids ◽  
Ball Milling ◽  
Reaction Temperature ◽  
Room Temperature ◽  
Reaction Times ◽  
Solvent Free ◽  
High Yield ◽  
One Pot ◽  
Aryl Bromides ◽  
Mcm 41

An effective approach to monobromination reactions utilizing room temperature ball-milling is introduced for the synthesis of aryl bromides and bromoketones with N-bromosuccinimide (NBS) and MCM-41-SO3H. Advantages of this technique are short reaction times and high regioselectivity. In contrast to other techniques using microwaves, ultrasound, or ionic liquids, handling of sensitive materials is possible and furthermore, this method has advantages over other solvent-free techniques that require a higher reaction temperature for high yield of products.

scholarly journals K2CO3: A Mild and Efficient Catalyst for the Synthesis of Pyran Annulated Heterocyclic Systems by Grinding Method Under Solvent-Free Conditions

2017 ◽  
Vol 25 (2) ◽  
pp. 163-178 ◽  
Author(s):  
Reza Heydari ◽  
Rohollah Rahimi ◽  
Mehrnoosh Kangani ◽  
Afshin Yazdani-Elah-Abadi ◽  
Mojtaba Lashkari
Keyword(s):  
Room Temperature ◽  
Reaction Times ◽  
Aromatic Aldehydes ◽  
Solvent Free ◽  
Synthetic Methods ◽  
One Pot ◽  
Efficient Catalyst ◽  
Grinding Method ◽  
Solvent Free Conditions ◽  
The One

Abstract The potassium carbonate was applied as a green and efficient catalyst for the one-pot synthesis of pyran annulated heterocyclic systems, via the condensation between aromatic aldehydes, malononitrile and dimedone/1-naphtole by a grinding method at room temperature and solvent-free conditions. Short reaction times, environmentally friendly procedure and excellent yields are the main advantages of this procedure which makes it more economic than other environmentally synthetic methods.

scholarly journals Solvent Extraction of Sr2+ and Cs+ Based on Hydrophobic Protic Ionic Liquids

2007 ◽  
Vol 62 (5-6) ◽  
pp. 281-291 ◽  
Author(s):  
Huimin Luo ◽  
Miao Yu ◽  
Sheng Dai
Keyword(s):  
Ionic Liquids ◽  
Solvent Extraction ◽  
Room Temperature ◽  
Extraction Efficiency ◽  
Synthesis Method ◽  
High Yield ◽  
Protic Ionic Liquids ◽  
Separation Processes ◽  
One Pot ◽  
Solvent Systems

A series of new hydrophobic and protic alkylammonium ionic liquids with bis(trifluoromethylsulfonyl) imide or bis(perfluoroethylsulfonyl)imide as conjugated anions was synthesized in a one-pot reaction with a high yield. In essence our synthesis method involves the combination of neutralization and metathesis reactions. Some of these hydrophobic and protic ionic liquids were liquids at room temperature and therefore investigated as new extraction media for separation of Sr2+ and Cs+ from aqueous solutions. An excellent extraction efficiency was found for some of these ionic liquids using dicyclohexano-18-crown-6 and calix[4]arene-bis(tert-octylbenzo-crown-6) as extractants. The observed enhancement in the extraction efficiency can be attributed to the greater hydrophilicity of the cations of the protic ionic liquids. The application of the protic ionic liquids as new solvent systems for solvent extraction opens up a new avenue in searching for simple and efficient ionic liquids for tailored separation processes.

Chlorosulfonic Acid Supported Piperidine-4-carboxylic Acid (PPCA) Functionalized Fe3O4 Nanoparticles (Fe3O4-PPCA): The Efficient, Green and Reusable Nanocatalyst for the Synthesis of Pyrazolyl Coumarin Derivatives under Solvent-Free Conditions

2019 ◽  
Vol 22 (2) ◽  
pp. 123-128
Author(s):  
Setareh Habibzadeh ◽  
Hassan Ghasemnejad-Bosra ◽  
Mina Haghdadi ◽  
Soheila Heydari-Parastar
Keyword(s):  
Carboxylic Acid ◽  
Fe3o4 Nanoparticles ◽  
High Efficiency ◽  
Reaction Times ◽  
Chlorosulfonic Acid ◽  
Aromatic Aldehydes ◽  
Solvent Free ◽  
Magnetic Nanocatalyst ◽  
One Pot ◽  
Solvent Free Conditions

Background: In this study, we developed a convenient methodology for the synthesis of coumarin linked to pyrazolines and pyrano [2,3-h] coumarins linked to 3-(1,5-diphenyl-4,5- dihydro-1H-pyrazol-3-yl)-chromen-2-one derivatives using Chlorosulfonic acid supported Piperidine-4-carboxylic acid (PPCA) functionalized Fe3O4 nanoparticles (Fe3O4-PPCA) catalyst. Materials and Methods:: Fe3O4-PPCA was investigated as an efficient and magnetically recoverable Nanocatalyst for the one-pot synthesis of substituted coumarins from the reaction of coumarin with a variety of aromatic aldehydes in high to excellent yield at room temperature under solvent-free conditions. The magnetic nanocatalyst can be easily recovered by applying an external magnet device and reused for at least 10 reaction runs without considerable loss of reactivity. Results and Conclusion: The advantages of this protocol are the use of commercially available materials, simple and an inexpensive procedure, easy separation, and an eco-friendly procedure, and it shows good reaction times, good to high yields, inexpensive and practicability procedure, and high efficiency.

Preparation and Characterization of a Novel Room Temperature Dicationic Ionic Liquid and its Application in the Synthesis of Xanthenediones Under Solvent-Free Conditions

2018 ◽  
Vol 21 (8) ◽  
pp. 602-608 ◽  
Author(s):  
Zainab Ehsani-Nasab ◽  
Ali Ezabadi
Keyword(s):  
Ionic Liquid ◽  
Room Temperature ◽  
Reaction Times ◽  
Significant Loss ◽  
Solvent Free ◽  
Acidity Function ◽  
Efficient Catalyst ◽  
Solvent Free Conditions ◽  
Hammett Acidity Function ◽  
Dicationic Ionic Liquid

Aim and Objective: In the present work, 1, 1’-sulfinyldiethylammonium bis (hydrogen sulfate) as a novel room temperature dicationic ionic liquid was synthesized and used as a catalyst for xanthenediones synthesis. Material and Method: The dicationic ionic liquid has been synthesized using ethylamine and thionyl chloride as precursors. Then, by the reaction of [(EtNH2)2SO]Cl2 with H2SO4, [(EtNH2)2SO][HSO4]2 was prepared and after that, it was characterized by FT-IR, 1H NMR, 13C NMR as well as Hammett acidity function. This dicationic ionic liquid was used as a catalyst for the synthesis of xanthenediones via condensation of structurally diverse aldehydes and dimedone under solvent-free conditions. The progress of the reaction was monitored by thin layer chromatography (ethyl acetate/n-hexane = 3/7). Results: An efficient solvent-free method for the synthesis of xanthenediones has been developed in the presence of [(EtNH2)2SO][HSO4]2 as a powerful catalyst with high to excellent yields, and short reaction times. Additionally, recycling studies have demonstrated that the dicationic ionic liquid can be readily recovered and reused at least four times without significant loss of its catalytic activity. Conclusion: This new dicationic ionic liquid can act as a highly efficient catalyst for xanthenediones synthesis under solvent-free conditions.

Nickel (II) and oxovanadium (IV) complexes supported on MCM-41 mesoporous and their application in catalytic selective sulfide and thiol oxidation

2020 ◽  
Vol 23 ◽  
Author(s):  
Mohsen Nikoorazm ◽  
Maryam Khanmoradi ◽  
Masoumeh Sayadian
Keyword(s):  
Catalytic Activity ◽  
Room Temperature ◽  
Sol Gel ◽  
Reaction Times ◽  
Significant Loss ◽  
Spectral Studies ◽  
High Catalytic Activity ◽  
Catalytic Systems ◽  
Solvent Free Conditions ◽  
Mcm 41

Introduction:: MCM-41 was synthesized using the sol-gel method. Then two new transition metal complexes of Nickel (II) and Vanadium (IV), were synthesized by immobilization of adenine (6-aminopurine) into MCM-41 mesoporous. The compounds have been characterized by XRD, TGA, SEM, AAS and FT-IR spectral studies. Using these catalysts provided an efficient and enantioselective procedure for oxidation of sulfides to sulfoxides and oxidative coupling of thiols to their corresponding disulfides using hydrogen peroxide at room temperature. Materials and Methods:: To a solution of sulfide or thiol (1 mmol) and H2O2 (5 mmol), a determined amount of the catalyst was added. The reaction mixture was stirred at room temperature for the specific time under solvent free conditions. The progress of the reaction was monitored by TLC using n-hexane: acetone (8:2). Afterwards, the catalyst was removed from the reaction mixture by centrifugation and, then, washed with dichloromethane in order to give the pure products. Results:: All the products were obtained in excellent yields and short reaction times indicating the high activity of the synthesized catalysts. Besides, the catalysts can be recovered and reused for several runs without significant loss in their catalytic activity. Conclusion:: These catalytic systems furnish the products very quickly with excellent yields and VO-6AP-MCM-41 shows high catalytic activity compared to Ni-6AP-MCM-41.

Synthesis of Highly Functionalized Quinazoline-2,4(1H,3H)-diones from Isocyanides, Aniline and Isocyanate via Cu-Catalyzed Intermolecular C-H Activation Reactions

2020 ◽  
Vol 17 (11) ◽  
pp. 832-836
Author(s):  
Manijeh Nematpour ◽  
Hossein Fasihi Dastjerdi ◽  
Mehdi Jahani ◽  
Sayyed Abbas Tabatabai
Keyword(s):  
13C Nmr ◽  
Reaction Times ◽  
High Yield ◽  
One Pot ◽  
1H And 13C Nmr ◽  
Activation Reaction ◽  
Elemental Analyses

A simple and appropriate procedure for the synthesis of quinazoline-2,4(1H,3H)-dione derivatives from isocyanides, aniline and isocyanate via the Cu-catalyzed intramolecular C-H activation reaction is reported. The advantages of this method are one-pot conditions, accessible starting materials- catalyst, high yield of products, and short reaction times. The structures are confirmed spectroscopically (1H- and 13C-NMR, IR and EI-MS) and by elemental analyses.

Catalyst- and solvent-free Csp2-H functionalization of 4-hydroxycoumarins via C-3 dehydrogenative aza-coupling under ball-milling

2021 ◽  
Author(s):  
Goutam Brahmachari ◽  
Indrajit Karmakar ◽  
Pintu Karmakar
Keyword(s):  
Ball Milling ◽  
Aromatic Amines ◽  
Solvent Free ◽  
One Pot ◽  
Biologically Relevant ◽  
Tert Butyl ◽  
Three Component Reaction ◽  
Primary Aromatic Amines

A one-pot procedure for the synthesis of biologically relevant coumarin-hydrazones by a three-component reaction between 4-hydrocoumarins, primary aromatic amines and tert-butyl nitrite under ball-milling in the absence of any catalyst/additive...

A highly efficient and green approach for the synthesis of pyrimido[4,5-b]quinolines using N,N-diethyl-N-sulfoethanaminium chloride

2021 ◽  
Vol 76 (2) ◽  
pp. 85-90
Author(s):  
Abdolkarim Zare ◽  
Manije Dianat
Keyword(s):  
Reaction Times ◽  
Solvent Free ◽  
One Pot ◽  
Catalyst Amount ◽  
Green Protocol ◽  
Highly Efficient ◽  
Green Approach ◽  
Solvent Free Conditions ◽  
The One ◽  
High Yields

Abstract A highly efficient and green protocol for the synthesis of pyrimido[4,5-b]quinolines has been described. The one-pot multicomponent reaction of dimedone with arylaldehydes and 6-amino-1,3-dimethyluracil in the presence of N,N-diethyl-N-sulfoethanaminium chloride ([Et3N–SO3H][Cl]) as an ionic liquid (IL) catalyst under solvent-free conditions afforded the mentioned compounds in high yields and short reaction times. Our protocol is superior to many of the reported protocols in terms of two or more of these factors: the reaction times, yields, conditions (solvent-free versus usage of organic solvents), temperature and catalyst amount.

scholarly journals Synthesis of 2,4,6-triarylpyridines Using AlPO4 Under Solvent-free Conditions

2010 ◽  
Vol 2 (2) ◽  
pp. 337-342 ◽  
Author(s):  
P. Rajput ◽  
N. J. P. Subhashini ◽  
Shiva Raj
Keyword(s):  
Heterogeneous Catalyst ◽  
Simple Procedure ◽  
Reaction Times ◽  
Aluminum Phosphate ◽  
Solvent Free ◽  
One Pot ◽  
One Pot Synthesis ◽  
Solvent Free Conditions

A series of 2,4,6-triarylpyridines have been prepared using a variety of aromatic and heteroaromatic aldehydes in the presence of aluminum phosphate (AlPO4) as a heterogeneous catalyst at 120 oC under solvent-free conditions. The present methodology offers several advantages such as excellent yields, simple procedure, shorter reaction times, milder conditions and the catalyst exhibited remarkable reusable activity. Keywords: Aluminum phosphate; 2,4,6-triarylpyridines; One-pot synthesis; Shorter reaction times;  Reusable activity.  © 2010 JSR Publications. ISSN: 2070-0237 (Print); 2070-0245 (Online). All rights reserved. DOI: 10.3329/jsr.v2i2.3859               J. Sci. Res. 2 (2), 337-342 (2010) 

Rapid and Green One-Pot Synthesis of Novel 2-(4-Hydroxy-2-oxo-2H-chromen-3-yl)-2-(arylamino)-1H-indene-1,3(2H)-diones

2021 ◽  
Vol 18 ◽  
Author(s):  
Abolfazl Olyaei ◽  
Zahra Ghahremany ◽  
Madieh Sadeghpour
Keyword(s):  
Aromatic Amines ◽  
Low Cost ◽  
Guanidine Hydrochloride ◽  
Reaction Times ◽  
Solvent Free ◽  
One Pot ◽  
Solvent Free Conditions ◽  
The One ◽  
High Yields ◽  
Work Up

: A green and efficient protocol was developed for the one-pot three-component synthesis of novel 2-(4-hydroxy-2-oxo-2H-chromen-3-yl)-2-(arylamino)-1H-indene-1,3(2H)-dione derivatives by the reaction of 4-hydroxycoumarin, ninhydrin and aromatic amines in the presence of guanidine hydrochloride as an organocatalyst under solvent-free conditions. The present approach offers several advantages such as low cost, simple work-up, short reaction times, chromatography-free purification, high yields and greener conditions.

Sign in / Sign up

Export Citation Format

Share Document