scholarly journals A Cephalometric Study to Evaluate the Variations in Pharyngeal Airway Spaces in Class I and Class II Malcocclusions

2013 ◽  
Vol 01 (03) ◽  
pp. 163-168
Author(s):  
Navreet Sandhu ◽  
Sarabjeet Sandhu ◽  
Kavita Mehta ◽  
Rita Kashyap
Keyword(s):  
Upper Airway ◽  
Class Ii ◽  
Class I ◽  
Pharyngeal Airway ◽  
Significant Difference ◽  
Nasopharyngeal Airway ◽  
Close Relationship ◽  
Mandibular Position ◽  
Craniofacial Biology ◽  
Cephalometric Study

Abstract Introduction: Ever since the time of Edward H. Angle, the effects of upper airway obstruction have been recognized in the field of craniofacial biology. Because of the close relationship between the pharynx and the dentofacial structures, a mutual interaction is expected to occur between the pharyngeal structures and the dentofacial pattern, and therefore justifies orthodontic interest. The purpose of this study was to compare the upper and lower pharyngeal widths and nasopharyngeal area in class I and class II malocclusion patients. Methods: The study sample consisted of 48 subjects of age group 18-26 years, divided into 2 groups : class I(n=24) and class II(n=24). Pharyngeal airways were assessed according to Mc Namara's analysis and Handelman and Osborne method of measuring pharyngeal widths and nasopharyngeal areas. Results: Independent t –test showed a statistically significant difference (p<0.01) in upper aerial width and nasopharyngeal airway area between two groups, showing that in class II cases upper aerial width is narrower and nasopharyngeal area is small when compared to class I cases. Conclusion: Conclusion of the study was that upper aerial width and nasopharyngeal airway area of class II cases were smaller than Class I cases. It was observed that mandibular position with respect to cranial base had an effect on pharyngeal airway.

scholarly journals RELATION BETWEEN SAGITTAL POSITION OF THE MANDIBLE AND PHARYNGEAL AIRWAY VOLUME IN ADULTS USING CONE BEAM COMPUTED TOMOGRAPHY

2021 ◽  
Vol 9 (10) ◽  
pp. 261-269
Author(s):  
Ahmed Mohamed Sherif Farag ◽  
◽  
Mohamed Adel Nadim ◽  
Abaddi Adel Elkadi ◽  
◽  
...  
Keyword(s):  
Craniofacial Morphology ◽  
Radiology Department ◽  
Oropharyngeal Airway ◽  
Pharyngeal Airway ◽  
Significant Difference ◽  
Nasopharyngeal Airway ◽  
Mandibular Position ◽  
Group 3 ◽  
Group 2 ◽  
Mandibular Retrognathism

Introduction: Many authors have discussed the relationship between craniofacial morphology and pharyngeal airway spaces in different malocclusions and skeletal patterns. So the aim of this work was to study the relation between sagittal position of the mandible and pharyngeal airway volume in adults using CBCT. Materials And Methods:Twentyone CBCT radiographs were collected from the archive of Radiology Department at Suez Canal University and were divided into 3 groups according to the measured SNB angle. Group 1 normal mandibular position, group 2 retrognathic mandible and group 3 prognathic mandible. Dolphin 3D imaging software was used to measure the airway volume for all the radiographs. Nasopharyngeal, oropharyngeal, hypopharyngeal and total pharyngeal airway volumes were measured for all the radiographs. F-test (ANOVA) was used for comparison between groups and Tukey test for pairwise comparisons. Correlations between variables were tested using PearsonÂ’s correlation coefficient. Results: there was statistically significant difference in the mean total pharyngeal airway volume and oropharyngeal airway volumes between the three groups. Nasopharyngeal airway volume and hypopharyngeal airway volume had non-significant difference between groups. There was a significant positive correlation between total pharyngeal airway volume (mm3) and SNB angle. Conclusion: Pharyngeal airway volume differs with different sagittal positions of the mandible. Pharyngeal airway volume decreases with mandibular retrognathism and increases with mandibular prognathism.

scholarly journals Temporomandibular Joint Osseous Morphology of Class I and Class II Malocclusions in the Normal Skeletal Pattern: A Cone-Beam Computed Tomography Study

Diagnostics ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 541
Author(s):  
Xiao-Chuan Fan ◽  
Lin-Sha Ma ◽  
Li Chen ◽  
Diwakar Singh ◽  
Xiaohui Rausch-Fan ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Temporomandibular Joint ◽  
Cone Beam Computed Tomography ◽  
Class Ii ◽  
Class I ◽  
Cone Beam ◽  
Glenoid Fossa ◽  
Linear Measurements ◽  
Significant Difference ◽  
Skeletal Pattern

(1) Background—The aim of the present study was to evaluate the correlation between the temporomandibular joint (TMJ) osseous morphology of normal skeletal pattern individuals with different dental malocclusions by using cone-beam computed tomography (CBCT). (2) Methods—The CBCT images of bilateral TMJs in 67 subjects with skeletal class I and average mandibular angle (26 males and 41 females, age range 20–49 years) were evaluated in this study. The subjects were divided into class I, class II division 1, and class II division 2 according to the molar relationship and retroclination of the maxillary incisors. Angular and linear measurements of TMJ were evaluated and the differences between the groups were statistically analyzed. (3) Results—Intragroup comparisons showed statistical differences for articular eminence inclination, the width of the glenoid fossa, the ratio of the width of the glenoid fossa to the depth of the glenoid fossa, the condylar angle, and the intercondylar angle between the malocclusion groups. The measurements of the glenoid fossa shape showed no significant difference between the left and right sides. Females showed more differences in the morphological parameters of TMJ between the three malocclusion groups than the males. (4) Conclusion—The present study revealed differences in the TMJ osseous morphology between dental class I and class II malocclusions in the normal skeletal pattern.

scholarly journals Comparative Evaluation of Adenoids, Upper Airway, and Tongue Using “Predictors of Difficult Airways” in Class II Division 1 and Division 2 Cases with Class I Cases: Prospective In Vivo Observational Study

2021 ◽  
pp. 030157422096341
Author(s):  
Smita Mangesh Choudhari ◽  
Sunita Shrivastav
Keyword(s):  
Significant Positive Correlation ◽  
Upper Airway ◽  
Class Ii ◽  
Class I ◽  
Positive Correlation ◽  
Division 1 ◽  
Difficult Airways ◽  
Mandibular Protrusion ◽  
Division 2 ◽  
Class Ii Division 1

Introduction: Altered nasorespiratory function leads to altered craniofacial growth. Thus, airway evaluation is important for preventive, interceptive, and corrective orthodontic treatment. The aim of this study was to evaluate and compare adenoids, the upper airway, the tongue, and mandibular dimensions using “predictors of difficult airways” in class II division 1 and class II division 2 cases with class I cases. Method: Sixty subjects of age 15 to 18 years were divided into 3 groups (group 1: class I cases; group 2: class II division 1 cases; and group 3: class II division 2 cases) based on cephalometric parameters, with 20 cases in each group. Cephalometric evaluation of adenoids and the nasopharyngeal airway was done using the Handelman–Osborne area method. Upper and lower airway evaluation was done using McNamara’s linear method. “Predictors of difficult airways” were used for evaluation of the airway, which included nasal competency, the Mallampati scale, mandibular length, mandibular protrusion, and the thyromental distance. Results: The present study found a significant positive correlation between the grades of nasal competency and percentage adenoid wall area, and a significant negative correlation between the grades of nasal competency and the upper airway. There was a significant positive correlation between the grades of nasal competency and mandibular length, and a significant positive correlation between the grades of mandibular protrusion and mandibular length. There was a significant positive correlation between the grades of the thyromental distance and mandibular length. Conclusion: It was concluded that the “predictors of difficult airways” would be helpful in early diagnosis and identification of potential risk factors that may cause “breathing disorders”–related malocclusions and later on increase the risk of developing OSA.

scholarly journals Changes in the Upper and Lower Pharyngeal Airway Spaces Associated with Rapid Maxillary Expansion

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Fitin Aloufi ◽  
Charles B. Preston ◽  
Khalid H. Zawawi
Keyword(s):  
Orthodontic Treatment ◽  
Upper Airway ◽  
Rapid Maxillary Expansion ◽  
Lower Airway ◽  
Control Group ◽  
Maxillary Expansion ◽  
Pharyngeal Airway ◽  
Significant Difference ◽  
And Gender ◽  
Maxillary Constriction

Objectives. The primary objectives of this retrospective study were first to compare the upper and lower pharyngeal airway spaces between orthodontic patients with and without maxillary constriction and second to evaluate the effect of rapid maxillary expansion (RME) on these airway spaces. A secondary objective was to compare the mode of breathing between groups. Materials and Methods. The experimental (RME) group consisted of 30 patients (mean age, years, 16 boys and 14 girls) with maxillary constriction who were treated with hyrax-type RME. The control group comprised the records of age- and gender matched patients (mean age, years, 16 boys and 14 girls) with no maxillary constriction but requiring nonextraction comprehensive orthodontic treatment. Cephalometric measurements in the sagittal dimension of upper and lower airway spaces for the initial and final records were recorded. Mode of breathing and length of treatment were also compared. Results. The sagittal dimension of the upper airway increased significantly in the RME group ( mm) compared to the control group ( mm), . However, there was no significant difference in the lower pharyngeal airway measurement between the RME group () and the control group (), . There was no significant difference with respect to mode of breathing between the two groups (). Conclusion. Rapid maxillary expansion (RME) during orthodontic treatment may have a positive effect on the upper pharyngeal airway, with no significant change on the lower pharyngeal airway.

scholarly journals Comparison of Cervical Vertebral Body Volume in Class II Vertical and Class II Horizontal Cases With Class I Cases Using 3D-DVT

2020 ◽  
Vol 54 (4) ◽  
pp. 332-337
Author(s):  
Hamza Saifuddin Dargahwala ◽  
Pallavi Daigavane ◽  
Vausdevan SD ◽  
Ranjit Kamble ◽  
Sunita Shrivastav ◽  
...  
Keyword(s):  
Vertebral Body ◽  
Cervical Vertebrae ◽  
Class Ii ◽  
Growth Patterns ◽  
Class I ◽  
Body Volume ◽  
Reference Structure ◽  
Skeletal Class ◽  
Significant Difference ◽  
Cervical Vertebral Body

The branch of orthodontics has had an interest in the cervical vertebrae wherein cervical spine is used as a reference structure for natural head position, so skeletal age was evaluated by studying variations in the cervical vertebral morphologies. Among all evaluations, very limited data is available wherein comparison between cervical vertebral body volumes between the different malocclusions has been done. This study aimed to compare the differences in the volumes of cervical vertebral bodies of C2, C3, and C4 between skeletal class I and class II malocclusions of both horizontal and vertical growth patterns. In class I the volume was significantly lesser as compared to class II. It was seen that there was statistically no significant difference in the volume between the horizontal and vertical growers. It can be concluded from this study that cervical vertebral body volume has no effect on growth pattern. However, variations in cervical vertebral body volume are seen with different malocclusions.

scholarly journals Comparison of arch width, alveolar width and buccolingual inclination of teeth between Class II division 1 malocclusion and Class I occlusion

2012 ◽  
Vol 83 (2) ◽  
pp. 246-252 ◽  
Author(s):  
Rui Shu ◽  
Xianglong Han ◽  
Yating Wang ◽  
Hui Xu ◽  
Dongqing Ai ◽  
...  
Keyword(s):  
Class Ii ◽  
Class I ◽  
Posterior Teeth ◽  
Mandibular Arch ◽  
Arch Width ◽  
Significant Difference ◽  
Division 1 ◽  
Maxillary Premolars ◽  
Mandibular Posterior Teeth ◽  
Class Ii Division 1

ABSTRACT Objective: To compare the arch width, alveolar width, and buccolingual inclination of maxillary and mandibular posterior teeth between Class II division 1 malocclusion and Class I occlusion. Materials and Methods: Forty-five subjects with Class I occlusion and 45 subjects with Class II division 1 malocclusion were selected to measure the maxillary and mandibular arch width and alveolar width of premolars and first molars with digital caliper. Buccolingual inclination of maxillary and mandibular premolars and first molars were measured with a modified universal bevel protractor. Results: All of the posterior teeth in both groups were lingually tilted. The maxillary premolars and first molars were significantly more lingually tilted (P &lt; .05) in Class II division 1 malocclusion than in Class I occlusion. Mandibular first premolars were significantly less lingually tilted in Class II division 1 malocclusion than in Class I occlusion. No significant difference of buccolingual inclination was found in mandibular second premolars and first molars between the two groups. No significant difference in maxillary and mandibular arch width and alveolar width was found between the two groups. Conclusions: Buccolingual inclination rather than arch width and alveolar width plays an important role in transverse discrepancy of Class II division 1 malocclusion.

scholarly journals Upper Airway Dimensions in Class II Malocclusion

2007 ◽  
Vol 77 (6) ◽  
pp. 1046-1053 ◽  
Author(s):  
Mirja Kirjavainen ◽  
Turkka Kirjavainen
Keyword(s):  
Treatment Time ◽  
Upper Airway ◽  
Class Ii ◽  
Class I ◽  
Class Ii Malocclusion ◽  
Cross Sectional ◽  
Lateral Cephalograms ◽  
Division 1 ◽  
Upper Airway Structure ◽  
Class Ii Division 1

Abstract Objective: To study the effects of cervical headgear treatment of Class II division 1 malocclusion on upper airway structures in children. Materials and Methods: Forty children aged 9.1 (7.2–11.5) years with Class II division 1 malocclusion were treated using a cervical headgear as the only treatment appliance. The headgear consisted of a long outer bow bent 15° upward and a large inner bow expanded 10 mm larger than the intermolar distance. Lateral cephalograms were taken before and after the treatment. Upper airway structures were estimated from the cephalograms. The results were compared to cross-sectional data of 80 age-matched controls with a Class I molar relationship. Results: A Class I molar relationship was achieved in all treated children. The mean treatment time was 1.6 (0.3–3.1) years. The Class II malocclusion was accompanied by a similar or wider nasopharyngeal space than in the controls but narrower oro- and hypopharyngeal spaces. The retropalatal area was widened by the treatment (P &lt; .05), whereas the rest of the oropharynx and hypopharynx remained narrower than in the controls. Before the treatment, the mandibular plane was in a more horizontal position than in the controls, but during the treatment, it rotated to a position similar to that of the controls. Conclusion: Class II division 1 malocclusion is associated with a narrower upper airway structure even without retrognathia. Headgear treatment is associated with an increase in the retropalatal airway space.

scholarly journals The duration of pubertal growth peak among three skeletal classes

2016 ◽  
Vol 21 (5) ◽  
pp. 67-74 ◽  
Author(s):  
Waqar Jeelani ◽  
◽  
Mubassar Fida ◽  
Attiya Shaikh ◽  
◽  
...  
Keyword(s):  
Class Ii ◽  
Growth Potential ◽  
Class I ◽  
Maturation Stage ◽  
Class Iii ◽  
Pubertal Growth ◽  
Lateral Cephalograms ◽  
Wide Range ◽  
Significant Difference ◽  
The Mean

ABSTRACT Introduction: Pubertal growth peak is closely associated with a rapid increase in mandibular length and offers a wide range of therapeutic modifiability. Objective: The aim of the present study was to determine and compare the mean ages of onset and duration of pubertal growth peak among three skeletal classes. Methods: A retrospective cross-sectional study was conducted using lateral cephalograms of 230 subjects with growth potential (110 males, 120 females). Subjects were categorized into three classes (Class I = 81, Class II = 82, Class III = 67), according to the sagittal relationship established between the maxilla and the mandible. The cervical vertebral maturation stage was recorded by means of Baccetti's method. The mean ages at CS3 and CS4 and the CS3-CS4 age interval were compared between boys and girls and among three skeletal classes. Results: Pubertal growth peak occurred on average four months earlier in girls than boys (p = 0.050). The average duration of pubertal growth peak was 11 months in Class I, seven months in Class II and 17 months in Class III subjects. Interclass differences were highly significant (Cohen's d > 0.08). However, no significant difference was found in the timing of pubertal growth peak onset among three skeletal classes (p = 0.126 in boys, p = 0.262 in girls). Conclusions: Girls enter pubertal growth peak on average four months earlier than boys. Moreover, the duration of pubertal growth peak is on average four months shorter in Class II and six months longer in Class III subjects as compared to Class I subjects.

Sign in / Sign up

Export Citation Format

Share Document