RELATION BETWEEN SAGITTAL POSITION OF THE MANDIBLE AND PHARYNGEAL AIRWAY VOLUME IN ADULTS USING CONE BEAM COMPUTED TOMOGRAPHY

Introduction: Many authors have discussed the relationship between craniofacial morphology and pharyngeal airway spaces in different malocclusions and skeletal patterns. So the aim of this work was to study the relation between sagittal position of the mandible and pharyngeal airway volume in adults using CBCT. Materials And Methods:Twentyone CBCT radiographs were collected from the archive of Radiology Department at Suez Canal University and were divided into 3 groups according to the measured SNB angle. Group 1 normal mandibular position, group 2 retrognathic mandible and group 3 prognathic mandible. Dolphin 3D imaging software was used to measure the airway volume for all the radiographs. Nasopharyngeal, oropharyngeal, hypopharyngeal and total pharyngeal airway volumes were measured for all the radiographs. F-test (ANOVA) was used for comparison between groups and Tukey test for pairwise comparisons. Correlations between variables were tested using PearsonÂ’s correlation coefficient. Results: there was statistically significant difference in the mean total pharyngeal airway volume and oropharyngeal airway volumes between the three groups. Nasopharyngeal airway volume and hypopharyngeal airway volume had non-significant difference between groups. There was a significant positive correlation between total pharyngeal airway volume (mm3) and SNB angle. Conclusion: Pharyngeal airway volume differs with different sagittal positions of the mandible. Pharyngeal airway volume decreases with mandibular retrognathism and increases with mandibular prognathism.

Download Full-text

A Cephalometric Study to Evaluate the Variations in Pharyngeal Airway Spaces in Class I and Class II Malcocclusions

Dental Journal of Advance Studies ◽

10.1055/s-0038-1671973 ◽

2013 ◽

Vol 01 (03) ◽

pp. 163-168

Author(s):

Navreet Sandhu ◽

Sarabjeet Sandhu ◽

Kavita Mehta ◽

Rita Kashyap

Keyword(s):

Upper Airway ◽

Class Ii ◽

Class I ◽

Pharyngeal Airway ◽

Significant Difference ◽

Nasopharyngeal Airway ◽

Close Relationship ◽

Mandibular Position ◽

Craniofacial Biology ◽

Cephalometric Study

Abstract Introduction: Ever since the time of Edward H. Angle, the effects of upper airway obstruction have been recognized in the field of craniofacial biology. Because of the close relationship between the pharynx and the dentofacial structures, a mutual interaction is expected to occur between the pharyngeal structures and the dentofacial pattern, and therefore justifies orthodontic interest. The purpose of this study was to compare the upper and lower pharyngeal widths and nasopharyngeal area in class I and class II malocclusion patients. Methods: The study sample consisted of 48 subjects of age group 18-26 years, divided into 2 groups : class I(n=24) and class II(n=24). Pharyngeal airways were assessed according to Mc Namara's analysis and Handelman and Osborne method of measuring pharyngeal widths and nasopharyngeal areas. Results: Independent t –test showed a statistically significant difference (p<0.01) in upper aerial width and nasopharyngeal airway area between two groups, showing that in class II cases upper aerial width is narrower and nasopharyngeal area is small when compared to class I cases. Conclusion: Conclusion of the study was that upper aerial width and nasopharyngeal airway area of class II cases were smaller than Class I cases. It was observed that mandibular position with respect to cranial base had an effect on pharyngeal airway.

Download Full-text

Mandibular morphology and pharyngeal airway space: A cephalometric study

APOS Trends in Orthodontics ◽

10.4103/2321-1407.148021 ◽

2014 ◽

Vol 5 ◽

pp. 22-28 ◽

Cited By ~ 2

Author(s):

Siddharth Mehta ◽

Surendra Lodha ◽

Ashima Valiathan ◽

Arun Urala

Keyword(s):

Upper Airway ◽

Normal Subjects ◽

Cross Sectional Study ◽

Craniofacial Morphology ◽

Cross Sectional ◽

Mandibular Prognathism ◽

Pharyngeal Airway ◽

Significant Difference ◽

Mandibular Morphology ◽

Mandibular Retrognathism

Introduction Mandibular retrognathism is considered to be the most important risk factor for upper airway obstruction. Aim This cross-sectional study intended to examine the relationship between craniofacial morphology and the pharyngeal airway space (PAS) in patients with mandibular retrognathism and mandibular prognathism, when compared to normal subjects. The study also analyzed the influence of mandibular morphology on pharyngeal length (PL). Materials and Methods The PAS was assessed in 92 females (age 15-30 years) further divided into three groups - Group 1- normal mandible (76°≤ SNB ≤82°; n = 31); Group 2-mandibular retrognathism (SNB <76°; n = 31); Group 3-Mandibular prognathism (SNB >82°; n = 30). All subjects were examined by lateral cephalometry with head position standardized using an inclinometer. Craniocervical angulation, uvula length, thickness and angulation were compared among different groups. Results The results showed no statistically significant difference in the pharyngeal airway between the three groups. Measurements of PL showed statistically significant higher values for retrognathic mandible group than normal and prognathic mandible group. Conclusion There is no significant difference between PAS between patients with mandibular retrognathism, normal mandible and mandibular prognathism. Mandibular retrognathism patients show a significantly higher uvula angulation than patients with mandibular prognathism. Craniocervical angulation showed maximum value in retrognathic mandible group followed by normal and prognathic mandible group respectively. Mean PL for retrognathic mandible patients was significantly higher than prognathic mandible patients.

Download Full-text

In-vivo evaluation of the effect of cyanoacrylate on prosthetic vascular graft infection – does cyanoacrylate increase the severity of infection?

VASA ◽

10.1024/0301-1526/a000867 ◽

2020 ◽

Vol 49 (4) ◽

pp. 281-284

Author(s):

Atıf Yolgosteren ◽

Gencehan Kumtepe ◽

Melda Payaslioglu ◽

Cuneyt Ozakin

Keyword(s):

Vascular Graft ◽

Graft Infection ◽

Vascular Graft Infection ◽

Group 4 ◽

Significant Difference ◽

Group 3 ◽

Group 2 ◽

Prosthetic Vascular Graft Infection ◽

Group 1

Summary. Background: Prosthetic vascular graft infection (PVGI) is a complication with high mortality. Cyanoacrylate (CA) is an adhesive which has been used in a number of surgical procedures. In this in-vivo study, we aimed to evaluate the relationship between PVGI and CA. Materials and methods: Thirty-two rats were equally divided into four groups. Pouch was formed on back of rats until deep fascia. In group 1, vascular graft with polyethyleneterephthalate (PET) was placed into pouch. In group 2, MRSA strain with a density of 1 ml 0.5 MacFarland was injected into pouch. In group 3, 1 cm 2 vascular graft with PET piece was placed into pouch and MRSA strain with a density of 1 ml 0.5 MacFarland was injected. In group 4, 1 cm 2 vascular graft with PET piece impregnated with N-butyl cyanoacrylate-based adhesive was placed and MRSA strain with a density of 1 ml 0.5 MacFarland was injected. All rats were scarified in 96th hour, culture samples were taken where intervention was performed and were evaluated microbiologically. Bacteria reproducing in each group were numerically evaluated based on colony-forming unit (CFU/ml) and compared by taking their average. Results: MRSA reproduction of 0 CFU/ml in group 1, of 1410 CFU/ml in group 2, of 180 200 CFU/ml in group 3 and of 625 300 CFU/ml in group 4 was present. A statistically significant difference was present between group 1 and group 4 (p < 0.01), between group 2 and group 4 (p < 0.01), between group 3 and group 4 (p < 0.05). In terms of reproduction, no statistically significant difference was found in group 1, group 2, group 3 in themselves. Conclusions: We observed that the rate of infection increased in the cyanoacyrylate group where cyanoacrylate was used. We think that surgeon should be more careful in using CA in vascular surgery.

Download Full-text

Isometric Handgrip Exercise Training Improves Spirometric Parameters and Pulmonary Capacity

Pathophysiology ◽

10.3390/pathophysiology28030022 ◽

2021 ◽

Vol 28 (3) ◽

pp. 328-338

Author(s):

Ogbutor Udoji Godsday ◽

Nwangwa Eze Kingsley ◽

Nwogueze Bartholomew Chukwuebuka ◽

Chukwuemeka Ephraim ◽

Ezunu Emmanuel ◽

...

Keyword(s):

Pulmonary Function ◽

Isometric Exercise ◽

Handgrip Exercise ◽

Isometric Handgrip ◽

Post Exercise ◽

Significant Difference ◽

Isometric Handgrip Exercise ◽

Group 3 ◽

Group 2 ◽

Group 1

Decline in normal physiological pulmonary function has been attributed to premorbid conditions such as prehypertension. Research evidence suggests that physical activity reduces age-related decline in pulmonary function and improves the efficiency of the lungs in prehypertensive patients. However, there is a scarcity of data evidence relating to isometric exercise and pulmonary function. Furthermore, the interrelationship between the intensity and duration of isometric exercise and pulmonary function in these patients is still uncertain. Therefore, this study was undertaken to investigate the effect of isometric handgrip exercise on pulmonary function capacity in adults with prehypertension. To determine the effectiveness of isometric handgrip exercise on pulmonary function capacity in adults with prehypertension. A quasi experiment using a pre- and post-exercise method was carried out in two out-patients hospital settings. The sample comprised 192 sedentary pre-hypertensive subjects, aged between 30–50 years, that were randomly distributed into three groups of 64 participants each. The subjects performed, for 24 consecutive days, an isometric handgrip exercise at 30% Maximum Voluntary Contraction (M.V.C.). At the end of the 24 days, group one (GP1) discontinued, while group two (GP2) continued the exercise protocol for another 24 consecutive days and group three (GP3) continued with the exercise protocol for another 24 consecutive days but at 50% M.V.C. Determinants of lung function (outcomes) were Forced Expiratory Volume in 1 s (FEV1), Forced Vital Capacity (FVC), FEV1/FVC Ratio and Peak Expiratory Flow Rate (PEFR). The study shows that there was no statistically significant difference in the pre- and post-exercise outcomes for FEV1, FVC, FEV1/FVC Ratio and PEFR after 24 days for group 1. In group 2, there was a statistically significant difference in the FVC [(mean = 0.12 ± 0.12), (p = 0.002)], FEV1 [(mean = 0.15 ± 0.17), (p = 0.003)] and PEF [(mean = 0.85 ± 0.35), (p = 0.001)] after 48 days. In group 3, there was a statistically significant difference (p = 0.001) in all the outcomes assessed after 48 days. There was a between groups difference in favour of group 2 compared with group 1 for outcomes of FEV1 [(mean = 0.142 ± 0.68), (p = 0.005)] and PEF [(mean = 0.83 ± 0.19), (p = 0.0031)]. There was statistically significant difference in favour of group 3 compared to group 2, by increasing the exercise intensity from 30% to 50% M.V.C., for outcomes of FVC [mean change = 0.10 ± 0.052), (p = 0.005)], FEV1/FVC [mean change = 3.18 ± 0.75), (p = 0.017)] and PEF [(mean change = 0.86 ± 0.35), (p = 0.001)] after 48 days. Isometric handgrip exercise (after 48 days at 30% to 50% M.V.C.) improves outcomes of pulmonary function capacity in adults with prehypertension. Meanwhile, duration and/or increase in intensity of the isometric effort significantly contributed to the affects attained.

Download Full-text

Effects of posterior tibial slope on the mid-term results of medial unicompartmental knee arthroplasty

Arthroplasty ◽

10.1186/s42836-021-00070-y ◽

2021 ◽

Vol 3 (1) ◽

Author(s):

Zhijie Chen ◽

Kaizhe Chen ◽

Yufei Yan ◽

Jianmin Feng ◽

Yi Wang ◽

...

Keyword(s):

Knee Flexion ◽

Tibial Slope ◽

Posterior Tibial ◽

Significant Difference ◽

Medial Unicompartmental Knee Arthroplasty ◽

Group 3 ◽

Group 2 ◽

Postoperative Knee ◽

Group 1

Abstract Objective To evaluate the effect of medial posterior tibial slope (PTS) on mid-term postoperative range of motion (ROM) and functional improvement of the knee after medial unicompartmental knee arthroplasty (UKA). Methods Medical records of 113 patients who had undergone 124 medial UKAs between April 2009 through April 2014 were reviewed retrospectively. The mean follow-up lasted 7.6 years (range, 6.2–11.2 years). Collected were demographic data, including gender, age, height, weight of the patients. Anteroposterior (AP) and lateral knee radiographs of the operated knees were available in all patients. The knee function was evaluated during office follow-up or hospital stay. Meanwhile, postoperative PTS, ROM, maximal knee flexion and Hospital for Special Surgery (HSS) knee score (pre−/postoperative) of the operated side were measured and assessed. According to the size of the PTS, patients were divided into 3 groups: group 1 (<4°), group 2 (4° ~ 7°) and group 3 (>7°). The association between PTS and the knee function was investigated. Results In our cohort, the average PTS was 2.7° ± 0.6° in group 1, 5.6° ± 0.9° in group 2 and 8.7° ± 1.2° in group 3. Pairwise comparisons showed significant differences among them (p < 0.01). The average maximal flexion range of postoperative knees in each group was 112.4° ± 5.6°, 116.4° ± 7.2°, and 117.5° ± 6.1°, respectively, with significant difference found between group 1 and group 2 (p < 0.05), and between group 1 and group 3 (p < 0.05). However, the gender, age, and body mass index (BMI) did not differ between three groups and there was no significant difference between groups in terms of pre−/postoperative HSS scores or postoperative knee ROM. Conclusion A mid-term follow-up showed that an appropriate PTS (4° ~ 7°) can help improve the postoperative flexion of knee. On the other hand, too small a PTS could lead to limited postoperative knee flexion. Therefore, the PTS less than 4° should be avoided during medial UKA.

Download Full-text

The Relationship between Serum Ferritin Levels and 5-Year All-Cause Mortality in Hemodialysis Patients

Blood Purification ◽

10.1159/000515639 ◽

2021 ◽

pp. 1-7

Author(s):

Emre Erdem ◽

Ahmet Karatas ◽

Tevfik Ecder

Keyword(s):

Serum Ferritin ◽

Hemodialysis Patients ◽

Rank Test ◽

Significant Difference ◽

All Cause Mortality ◽

Group 3 ◽

Group 2 ◽

The Relationship ◽

Group 1

Introduction: The effect of high serum ferritin levels on long-term mortality in hemodialysis patients is unknown. The relationship between serum ferritin levels and 5-year all-cause mortality in hemodialysis patients was investigated in this study. Methods: A total of 173 prevalent hemodialysis patients were included in this study. The patients were followed for up to 5 years and divided into 3 groups according to time-averaged serum ferritin levels (group 1: serum ferritin <800 ng/mL, group 2: serum ferritin 800–1,500 ng/mL, and group 3: serum ferritin >1,500 ng/mL). Along with the serum ferritin levels, other clinical and laboratory variables that may affect mortality were also included in the Cox proportional-hazards regression analysis. Results: Eighty-one (47%) patients died during the 5-year follow-up period. The median follow-up time was 38 (17.5–60) months. The 5-year survival rates of groups 1, 2, and 3 were 44, 64, and 27%, respectively. In group 3, the survival was lower than in groups 1 and 2 (log-rank test, p = 0.002). In group 1, the mortality was significantly lower than in group 3 (HR [95% CI]: 0.16 [0.05–0.49]; p = 0.001). In group 2, the mortality was also lower than in group 3 (HR [95% CI]: 0.32 [0.12–0.88]; p = 0.026). No significant difference in mortality between groups 1 and 2 was found (HR [95% CI]: 0.49 [0.23–1.04]; p = 0.063). Conclusion: Time-averaged serum ferritin levels >1,500 ng/mL in hemodialysis patients are associated with an increased 5-year all-cause mortality risk.

Download Full-text

Microleakage beneath Ceramic and Metal Brackets Bonded with a Conventional and an Antibacterial Adhesive System

The Angle Orthodontist ◽

10.2319/101805-368 ◽

2006 ◽

Vol 76 (6) ◽

pp. 1028-1034 ◽

Cited By ~ 32

Author(s):

Neslihan Arhun ◽

Ayca Arman ◽

Sevi Burçak Çehreli ◽

Serdar Arıkan ◽

Erdem Karabulut ◽

...

Keyword(s):

Adhesive System ◽

White Spot Lesions ◽

Adhesive Interface ◽

Group 4 ◽

Significant Difference ◽

Ceramic Brackets ◽

Group 3 ◽

Group 2 ◽

Ceramic Bracket ◽

Nail Varnish

Abstract Objective: To assess microleakage of a tooth-adhesive-bracket complex when metal or ceramic brackets were bonded with a conventional and an antibacterial self-etching adhesive. Materials and Methods: Forty freshly extracted human premolars were randomly assigned to four equal groups and received the following treatments: group 1 = Transbond XT + metal bracket, group 2 = Transbond XT + ceramic bracket, group 3 = Clearfil Protect Bond + ceramic bracket, and group 4 = Clearfil Protect Bond + metal bracket. After photopolymerization, the teeth were kept in distilled water for 1 month and thereafter subjected to thermal cycling (500 cycles). Specimens were further sealed with nail varnish, stained with 0.5% basic fuchsin for 24 hours, sectioned and examined under a stereomicroscope, and scored for marginal microleakage for the adhesive-tooth and bracket-adhesive interfaces from incisal and gingival margins. Statistical analysis was accomplished by Kruskal-Wallis test and Mann-Whitney U-test with Bonferroni correction. Results: All groups demonstrated microleakage between the adhesive-enamel and bracket-adhesive interfaces. A significant difference was observed among all groups (P < .05) for the microleakage between the bracket-adhesive interface. Metal brackets exhibited significantly more microleakage than did ceramic brackets between the bracket-adhesive interface with either of the adhesives. Clearfil Protect Bond exhibited results similar to Transbond XT. Clearfil Protect Bond may be a choice of adhesive in bracket bonding because of its antibacterial activity and similar microleakage results with the orthodontic adhesive. Conclusions: Metal brackets cause more leakage between an adhesive-bracket interface, which may lead to lower clinical shear bond strength and white-spot lesions.

Download Full-text

Different lead locations guided by fluoroscopy and ECG parameters and their effect on patients functional status

The Egyptian Heart Journal ◽

10.1186/s43044-019-0023-1 ◽

2019 ◽

Vol 71 (1) ◽

Author(s):

Mohamed MesbahTahaHassanin ◽

Ahmad ShafieAmmar ◽

Radwa M. Abdullah ◽

Mohammad Hassan Khedr

Keyword(s):

Functional Capacity ◽

Systolic Function ◽

Left Ventricular ◽

Left Ventricular Dyssynchrony ◽

Qrs Complex ◽

Significant Difference ◽

Septal Pacing ◽

Group 3 ◽

Group 2 ◽

Group 1

Abstract Background Right ventricular apical pacing with the resultant left ventricular dyssynchrony often leads to depressed systolic function and heart failure. This study aimed at investigating the relation between various septal locations guided by ECG and fluoroscopy and the intermediate term functional capacity of the patients. Results Fifty patients who received a single lead pacemaker with assumed > 90% pacemaker dependency. Patients were randomized according to RV pacing site RV into group 1 “high septum” (n = 15), group 2 “mid septum” (n = 25), and group 3 “low septum” (n = 10) using QRS vector and duration as well as fluoroscopic parameters. Their clinical status was assessed 6 months after device implementation using 6-min walk test (6MWT). The study showed that paced QRS complex duration itself has no significant difference between the different septal pacing locations (P-value 0.675), although its combination with the paced QRS complex vector can signify the optimal pacing site and 6MWT showed a significant difference among the groups in favor of group 1; group 1 (413.3 ± 148.5), group 2 (359.8 ± 124.6), and group 3 (276.0 ± 98.5) P value 0.04. Conclusion There was a significant difference found between the three septal pacing sites concerning the patient functional capacity with superiority of high septal location. By contrast, different septal sites showed no significant difference of the paced QRS complex duration. To optimize the pacing site in the septum, assessment of the paced QRS vector in leads I and III is of a great benefit especially when combined with paced QRS complex duration assessment.

Download Full-text

Fracture resistance of immature teeth filled with mineral trioxide aggregate, bioaggregate, and biodentine

European Journal of Dentistry ◽

10.4103/1305-7456.178310 ◽

2016 ◽

Vol 10 (02) ◽

pp. 220-224 ◽

Cited By ~ 6

Author(s):

Emre Bayram ◽

Huda Melike Bayram

Keyword(s):

Fracture Resistance ◽

Mineral Trioxide Aggregate ◽

Mean Values ◽

Root Canals ◽

Immature Teeth ◽

Significant Difference ◽

Group 3 ◽

Group 2 ◽

Post Hoc ◽

Group 1

ABSTRACT Objective: The purpose of this study was to evaluate fracture resistance of teeth with immature apices treated with coronal placement of mineral trioxide aggregate (MTA), bioaggregate (BA), and Biodentine. Materials and Methods: Forty-one freshly extracted, single-rooted human premolar teeth were used for the study. At first, the root length was standardized to 9 mm. The crown-down technique was used for the preparation of the root canals using the rotary ProTaper system (Dentsply Maillefer, Ballaigues, Switzerland) of F3 (30). Peeso reamer no. 6 was stepped out from the apex to simulate an incompletely formed root. The prepared roots were randomly assigned to one control (n = 5) and three experimental (n = 12) groups, as described below. Group 1: White MTA (Angelus, Londrina, Brazil) was prepared as per the manufacturer's instructions and compacted into the root canal using MAP system (Dentsply Maillefer, Ballaigues, Switzerland) and condensed by pluggers (Angelus, Londrina, Brazil). Group 2: The canals were filled with DiaRoot-BA (DiaDent Group International, Canada). Group 3: Biodentine (Septodont, Saint Maur des Fosses, France) solution was mixed with the capsule powder and condensed using pluggers. Instron was used to determine the maximum horizontal load to fracture the tooth, placing the tip 3 mm incisal to the cementoenamel junction. Mean values of the fracture strength were compared by ANOVA followed by a post hoc test. P < 0.05 was considered statistically significant. Results: No significant difference was observed among the MTA, BA, and biodentine experimental groups. Conclusion: All the three materials tested, may be used as effective strengthening agents for immature teeth.

Download Full-text

Filling of extraction sockets with autogenous bone in cats

Acta Cirurgica Brasileira ◽

10.1590/s0102-86502012000100014 ◽

2012 ◽

Vol 27 (1) ◽

pp. 82-87 ◽

Cited By ~ 3

Author(s):

Adelina Maria da Silva ◽

Wilson Machado de Souza ◽

Nair Trevizan Machado de Souza ◽

Marion Burkhardt de Koivisto ◽

Patrícia de Athayde Barnabé ◽

...

Keyword(s):

Cortical Bone ◽

Iliac Crest ◽

Autogenous Bone ◽

Canine Tooth ◽

Extraction Socket ◽

Significant Difference ◽

Group 3 ◽

Mandibular Canine ◽

Group 2 ◽

Group 1

PURPOSE: To evaluate bone healing in the extraction socket of the feline mandibular canine tooth after grafting. METHODS: Eighteen adult cats were submitted to unilateral extraction of mandibular canine tooth and divided into three groups. In group 1 (n=6), control, the extraction socket was left empty. In group 2 (n=6), the extraction socket was filled with autogenous cancelous bone from the iliac crest and in group 3 (n=6), with cortical bone chips from the iliac crest. Cats were euthanized at 6 weeks postoperative. RESULTS: Immediate postoperative radiographs in dorsoventral view showed a radiolucent area at the extraction wound. A decreased radiolucency was observed on the radiographs taken at 6 weeks postoperative. Histological examination showed formation of woven bone within the extraction socket. The percentage of newly formed bone within the extraction socket, measured by the histometry, showed no statistically significant difference among the values of the three groups (Kruskal-Wallis'test p>0.05) (group 1: 52.54 ± 15.46, group 2: 50.51 ± 5.01, group 3: 51.85 ± 9.52). CONCLUSION: The bone regeneration observed in the extraction sockets filled with autogenous cancellous bone or autogenous cortical bone chips was similar to that observed in the control sites, given an observation period of 6 weeks after extraction of the mandibular canine tooth.

Download Full-text