scholarly journals Tibial Tuberosity Transposition Stabilization Using a Cortical Screw Placed Adjacent to the Tuberosity in Dogs with Patellar Luxation

VCOT Open ◽  
2019 ◽  
Vol 02 (01) ◽  
pp. e43-e49
Author(s):  
Barbro Filliquist ◽  
Sivert Viskjer ◽  
Susan M. Stover
Keyword(s):  
Medical Records ◽  
Screw Fixation ◽  
Tibial Tuberosity ◽  
Fixation Method ◽  
Bone Screw ◽  
Cortical Screw ◽  
Implant Complications ◽  
Tibial Tuberosity Fracture ◽  
Fracture Development ◽  
Fissure Formation

Objectives The aim of this study was to describe a screw fixation method of the tibial tuberosity after transposition during surgical treatment of patellar luxation and to report complications and outcome of the procedure. Materials and Methods Medical records (2010–2016) of dogs treated for patellar luxation with tibial tuberosity transposition stabilization using a cortical bone screw placed adjacent to the tuberosity were retrospectively reviewed. Radiographs acquired immediately after surgery were evaluated for fissures. Proximal tibial dimensions and tibial tuberosity segments were measured. Intraoperative and postoperative complications were recorded. Results One-hundred and six dogs and 131 stifle surgeries were included. Implant complications associated with the screw occurred in 2/106 dogs (1.9%). Two dogs developed tibial tuberosity fracture and proximal displacement within 1 week of surgery and required stabilization with pin and tension band. Patellar reluxation rate following surgery was 6.9% (9/131 procedures). Presence of a fissure on postoperative radiographs increased the odds of tibial tuberosity fracture development (p < 0.001), while greater tibial tuberosity size (p = 0.023) and larger distal cortical attachment (p = 0.018) decreased the odds of fissure formation. Clinical significance Tibial tuberosity transposition can be achieved with a cortical screw placed lateral or medial to the tibial tuberosity.

Risk factors for tibial tuberosity fracture after tibial tuberosity advancement in dogs

2015 ◽  
Vol 28 (02) ◽  
pp. 116-123 ◽  
Author(s):  
A. E. Nutt ◽  
P. Garcia-Fernandez ◽  
F. San Roman ◽  
T. Parkin ◽  
I. Calvo
Keyword(s):  
Risk Factors ◽  
Logistic Regression ◽  
Body Weight ◽  
Surgical Technique ◽  
Medical Records ◽  
Tibial Tuberosity ◽  
Teaching Hospitals ◽  
Outcome Variable ◽  
Careful Attention ◽  
Tibial Tuberosity Fracture

SummaryObjective: To retrospectively identify factors that predispose to tibial tuberosity (TT) fracture after tibial tuberosity advancement (TTA) in dogs.Methods: The medical records and radio-graphs of a group of control dogs (n = 212) that had TTA surgery (n = 241 procedures) and did not sustain a fracture between 2008 and 2013, and those of 12 dogs that did sustain a fracture (n = 13 procedures) between 2008 and 2013 at two veterinary teaching hospitals were evaluated to determine the effect of signalment, body weight and surgical inaccuracies on TT fracture. Multivariable logistic regression was performed with the occurrence of TT fracture as the outcome variable of interest.Results: Signalment and body weight were not found to be associated with TT fracture. Of the surgical inaccuracies, osteotomy shape (p = 0.003), plate position (p = 0.009), and cage position (p = 0.039) were factors significantly associated with TT fracture.Clinical significance: This study provides data to support the hypothesis that poor plate position, poor cage position, and narrow distal osteotomy width are associated with TT fracture after TTA. We conclude that it is of paramount importance to pay careful attention to surgical technique in order to reduce this risk.

Complications Associated With 696 Tibial Plateau Leveling Osteotomies (2001–2003)

2006 ◽  
Vol 42 (1) ◽  
pp. 44-50 ◽  
Author(s):  
Kent D. Stauffer ◽  
Trent A. Tuttle ◽  
A.D. Elkins ◽  
Aaron P. Wehrenberg ◽  
Ben J. Character
Keyword(s):  
Clinical Outcomes ◽  
Complication Rate ◽  
Tibial Plateau ◽  
Tibial Tuberosity ◽  
Short Term ◽  
Patella Tendon ◽  
Implant Complications ◽  
Tibial Tuberosity Fracture ◽  
Fracture Patella

A total of 696 tibial plateau leveling osteotomy (TPLO) procedures were performed over a 30-month period following TPLO training. The overall complication rate was 18.8%. Complications were classified as perioperative (1%), short-term (9.3%), and long-term (8.5%). Examples of complications encountered during the study were hemorrhage, swelling at the incision site, premature staple removal by the dog, tibial tuberosity fracture, patella tendon swelling, and implant complications. Based on the rate of complications observed, clinical outcomes of TPLO procedures within 30 months of TPLO training were considered good.

Prevalence, Risk Factors and Outcome of Postoperative Tibial Tuberosity Fractures in Dogs Undergoing Triple Tibial Osteotomy Surgery

2019 ◽  
Vol 32 (04) ◽  
pp. 324-331
Author(s):  
Benito de la Puerta ◽  
Matteo Rossanese ◽  
Terry Emmerson
Keyword(s):  
Risk Factors ◽  
Medical Records ◽  
Strong Association ◽  
Tibial Tuberosity ◽  
Tibial Osteotomy ◽  
Term Outcome ◽  
Long Term Outcome ◽  
Radiographic Findings ◽  
Tibial Tuberosity Fracture

Objective The aim of this study was to report the prevalence and to identify the risk factors associated with postoperative tibial tuberosity fracture following a triple tibial osteotomy. This article also evaluates the outcome of these patients treated conservatively. Materials and Methods Medical records of 100 dogs (113 limbs) that underwent triple tibial osteotomy procedure were evaluated. Information obtained included signalment, preoperative, immediate postoperative and 6-week postoperative radiographic findings, intraoperative and postoperative complications. Long-term outcome was assessed using an owner questionnaire. Results Postoperative tibial tuberosity fracture was identified in 25/113 stifles. The only variable associated with the presence or absence of postoperative tibial tuberosity fracture within 6 weeks of surgery was postoperative cortical hinge width (CHW) or an indexed value of CHW to tibial width (TW). Using either a cut-off value of CHW of ≥ 5.5 mm or a cut-off value of CHW/TW of ≥ 0.21, only 1/27 stifle in our study developed tibial tuberosity fracture. Long-term owner evaluation of outcome was considered excellent or good in 65/70 stifles. Conclusion A narrow CHW at the distal cortical attachment of the tibial crest had a strong association with the development of postoperative tibial tuberosity fracture. No other patient or surgical variables were associated with tibial tuberosity fracture. Patients that developed tibial tuberosity fracture and were conservatively managed did not have a worse clinical outcome than patients that did not develop tibial tuberosity fracture.

Tibial tuberosity fracture as a complication of tibial tuberosity advancement

2014 ◽  
Vol 27 (02) ◽  
pp. 148-154 ◽  
Author(s):  
J. Aisa ◽  
D. Chase ◽  
P. Garcia-Fernandez ◽  
F. San Roman ◽  
D. Bennett ◽  
...  
Keyword(s):  
Medical Records ◽  
Incidental Finding ◽  
Weight Bearing ◽  
Sudden Onset ◽  
Tibial Tuberosity ◽  
Tibial Tuberosity Fracture ◽  
Long Term Follow Up ◽  
Surgical Group

SummaryTo retrospectively compare two clinical subsets of dogs suffering tibial tuberosity (TT) fracture (incidental finding or sudden onset severe lameness) as a complication of tibial tuberosity advancement (TTA) and to report the surgical management and outcome of TT fracture as a complication of TTA.The medical records of 10 dogs with eleven TT fractures or crest fractures after TTA were reviewed. The outcome and complications were determined from clinical and radiographic follow-up examinations. Limb function was evaluated between six and 12 weeks postoperatively. Owners were contacted by phone for long-term follow-up at least six months after the last examination.Four dogs required surgical stabilization and six dogs had conservative management. In the surgical group, every case experienced a sudden non-weight-bearing lameness after the initial TTA surgery. In three of the four cases an attempt was made to stabilize the TT and crest fracture while maintaining the TT advancement. Postoperative complications were encountered in three of the four surgically treated cases. Functional outcome was considered excellent in seven cases and good in the other three.Tibial tuberosity fracture is a complication of TTA that seems to have a favourable prognosis, although it can result in significant morbidity and in some cases revision surgery may be required.

Pullout Strength of Screws in Foal Third Metacarpal Bone after Overdrilling a 4.5 mm Hole

1998 ◽  
Vol 11 (04) ◽  
pp. 200-204 ◽  
Author(s):  
K. Kelly ◽  
G. S. Martin ◽  
D. J. Burba ◽  
S. A. Sedrish ◽  
R. M. Moore
Keyword(s):  
Cortical Bone ◽  
Metacarpal Bone ◽  
Pullout Strength ◽  
Cancellous Screw ◽  
Bone Screw ◽  
Screw Insertion ◽  
Holding Power ◽  
Cortical Screw ◽  
Metaphyseal Bone

SummaryThe purpose of the study was to determine and to compare the in vitro pullout strength of 5.5 mm cortical versus 6.5 mm cancellous bone screws inserted in the diaphysis and metaphysis of foal third metacarpal (MCIII) bones in threaded 4.5 mm cortical bone screw insertion holes that were then overdrilled with a 4.5 mm drill bit. This information is relevant to the selection of a replacement screw if a 4.5 mm cortical screw is stripped during orthopaedic surgery. In vitro pullout tests were performed in two independent cadaver studies, each consisting of 12 foal MCIII bones. Two 4.5 mm cortical screws were placed either in the mid-diaphysis (study 1) or distal metaphysis (study 2) of MCIII bones. The holes were then overdrilled with a 4.5 mm bit and had either a 5.5 mm cortical or a 6.5 mm cancellous screw inserted; screw pullout tests were performed at a rate of 0.04 mm/s until screw or bone failure occurred.The bone failed in all of the tests in the diaphyseal and metaphyseal bone. The holding power for 6.5 mm cancellous screws was significantly (p <0.05) greater than for 5.5 mm cortical screws in both the diaphysis and metaphysis. There was not any difference in the holding power of screws in either the diaphysis or the metaphysis between proximal and distal screw holes.If a 4.5 mm cortical bone screw strips in MCIII diaphyseal or metaphyseal bone of foals, a 6.5 mm cancellous screw would provide greater holding power than a 5.5 mm cortical screw.In order to provide information regarding selection of a replacement screw if a 4.5 mm cortical screw is stripped, the in vitro pullout strength was determined for 5.5 mm cortical and 6.5 mm cancellous screws inserted in third metacarpal diaphyseal and metaphyseal bone of foals in which threaded 4.5 mm cortical bone screw insertion holes had been overdrilled with a 4.5 mm bit. The holding power of the 6.5 mm cancellous screw was significantly greater than the 5.5 mm cortical screw in both the diaphysis and metaphysis of foal third metacarpal bone. Thus, it appears that if a 4.5 mm cortical screw is stripped during orthopaedic surgery in foals, a 6.5 mm cancellous screw would provide superior holding power.

Trans-metacarpal Screw Fixation for Extra-articular Proximal Phalangeal Base Fractures

2017 ◽  
Vol 22 (01) ◽  
pp. 35-38 ◽  
Author(s):  
Eichi Itadera ◽  
Takahiro Yamazaki
Keyword(s):  
Screw Fixation ◽  
Proximal Phalanx ◽  
Metacarpophalangeal Joint ◽  
Fixation Method ◽  
Compression Screw ◽  
Metacarpal Head ◽  
Headless Compression Screw ◽  
Articular Fractures ◽  
Intramedullary Canal ◽  
Cannulated Drill

We developed a new internal fixation method for extra-articular fractures at the base of the proximal phalanx using a headless compression screw to achieve rigid fracture fixation through a relatively easy technique. With the metacarpophalangeal joint of the involved finger flexed, a smooth guide-pin is inserted into the intramedullary canal of the proximal phalanx through the metacarpal head and metacarpophalangeal joint. Insertion tunnels are made over the guide-pin using a cannulated drill. Then, a headless cannulated screw is placed into the proximal phalanx. All of five fractures treated by this procedure obtained satisfactory results.

scholarly journals Effect of oblique headless compression screw fixation for metacarpal shaft fracture: a biomechanical in vitro study

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Yung-Cheng Chiu ◽  
Tsung-Yu Ho ◽  
Yen-Nien Ting ◽  
Ming-Tzu Tsai ◽  
Heng-Li Huang ◽  
...  
Keyword(s):  
Articular Cartilage ◽  
Screw Fixation ◽  
Shaft Fracture ◽  
Metacarpal Bone ◽  
Entry Point ◽  
Fixation Method ◽  
Exit Point ◽  
Compression Screw ◽  
Headless Compression Screw ◽  
Metacarpal Shaft

Abstract Background Metacarpal shaft fracture is a common fracture in hand trauma injuries. Surgical intervention is indicated when fractures are unstable or involve considerable displacement. Current fixation options include Kirschner wire, bone plates, and intramedullary headless screws. Common complications include joint stiffness, tendon irritation, implant loosening, and cartilage damage. Objective We propose a modified fixation approach using headless compression screws to treat transverse or short-oblique metacarpal shaft fracture. Materials and methods We used a saw blade to model transverse metacarpal neck fractures in 28 fresh porcine metacarpals, which were then treated with the following four fixation methods: (1) locked plate with five locked bicortical screws (LP group), (2) regular plate with five bicortical screws (RP group), (3) two Kirschner wires (K group), and (4) a headless compression screw (HC group). In the HC group, we proposed a novel fixation model in which the screw trajectory was oblique to the long axis of the metacarpal bone. The entry point of the screw was in the dorsum of the metacarpal neck, and the exit point was in the volar cortex of the supracondylar region; thus, the screw did not damage the articular cartilage. The specimens were tested using a modified three-point bending test on a material testing system. The maximum fracture forces and stiffness values of the four fixation types were determined by observing the force–displacement curves. Finally, the Kruskal–Wallis test was adopted to process the data, and the exact Wilcoxon rank sum test with Bonferroni adjustment was performed to conduct paired comparisons among the groups. Results The maximum fracture forces (median ± interquartile range [IQR]) of the LP, RP, HC, and K groups were 173.0 ± 81.0, 156.0 ± 117.9, 60.4 ± 21.0, and 51.8 ± 60.7 N, respectively. In addition, the stiffness values (median ± IQR) of the LP, HC, RP, and K groups were 29.6 ± 3.0, 23.1 ± 5.2, 22.6 ± 2.8, and 14.7 ± 5.6 N/mm, respectively. Conclusion Headless compression screw fixation provides fixation strength similar to locked and regular plates for the fixation of metacarpal shaft fractures. The headless screw was inserted obliquely to the long axis of the metacarpal bone. The entry point of the screw was in the dorsum of the metacarpal neck, and the exit point was in the volar cortex of the supracondylar region; therefore the articular cartilage iatrogenic injury can be avoidable. This modified fixation method may prevent tendon irritation and joint cartilage violation caused by plating and intramedullary headless screw fixation.

TIBIAL TUBEROSITY FRACTURE ASSOCIATED WITH A COMPARTMENT SYNDROME

Orthopedics ◽  
1992 ◽  
Vol 15 (9) ◽  
pp. 1109-1111
Author(s):  
David C Neuschwander ◽  
Stephen D Heinrich ◽  
William A Cenac
Keyword(s):  
Compartment Syndrome ◽  
Tibial Tuberosity ◽  
Tibial Tuberosity Fracture

scholarly journals Comparison Between With Kirschner-wires Only And Combined Screw Fixation in Proximal Reverse Chevron osteotomy(PCMO) For Hallux Valgus Deformity

2017 ◽  
Vol 2 (3) ◽  
pp. 2473011417S0002
Author(s):  
Hwa Jun Kang ◽  
Hong-Geun Jung ◽  
Jong-Soo Lee ◽  
Sungwook Kim ◽  
Mao Yuan Sun
Keyword(s):  
Hallux Valgus ◽  
Screw Fixation ◽  
Fixation Method ◽  
Kirschner Wires ◽  
Significant Difference ◽  
Group A ◽  
The Mean ◽  
Group B ◽  
Severe Hallux Valgus

Category: Bunion Introduction/Purpose: Kirschner-wires fixation, sometimes we have encountered pin irritation or pull-out. This is the reason why we consider additional fixation. Moreover, there are few reports according to comparison of fixation method, and Most of them focused on comparison K-wires or screw fixation only. Purpose of study is to compare clinical and radiographic outcome between Kirschner-wires only and combined screw fixation. Methods: The study included two different groups according to fixation methods. One with Kirschner-wires fixation (KW group) included 117 feet(of 98 patients), the other with combined screw fixation (KWS group) 56 feet (of 40 patients) with moderate to severe hallux valgus. Clinically, the preoperative and final follow-up visual analog scale (VAS) pain scores, the preoperative and final follow-up American Orthopaedic Foot & Ankle Society (AOFAS) hallux metatarsophalangeal (MTP)-interphalangeal (IP) scores, and patient satisfaction after the surgery were evaluated. Radiographically, the hallux valgus angle (HVA), intermetatarsal angle (IMA), medial sesamoid position (MSP), and first to fifth metatarsal width (1-5MTW) were analyzed before and after surgery. Results: The mean AOFAS score improved preoperative 65.5 to 95.3 at final follow up in group A, while preoperative 56.5 to 88.6 at final follow up. Pain VAS decreased from 5.7 to 0.5 in group A, whereas from 6.2 to 1.6 in group B. The mean HVA all improved from preoperative 38.5 to 9.3 at final follow up in group A and 34.7 to 9.1 in group B. The mean IMA and MSP also improved significantly at final follow up. In comparative analysis, the IMA did not show significant difference between postoperative and final state in group A, while showed significant increase in group B. Conclusion: We achieved favorable clinical and radiographic outcomes with minimal complications in patient with moderate to severe hallux valgus in both groups. However, this study shows no statistically significant difference in IMA during follow-up period and lower recurrence rate. Therefore we need to consider combined fixation method to provide better stability and can expect lower recurrence rate.

Sign in / Sign up

Export Citation Format

Share Document