Impact Assessment of Mixed Liquor Suspended Solids from Polyurethane Media Effluent on Ceramic Membrane Fouling in Anaerobic Hybrid Membrane Bioreactor

2022 ◽  
Vol 148 (1) ◽  
Author(s):  
Isha Burman ◽  
Alok Sinha
Keyword(s):  
Impact Assessment ◽  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Suspended Solids ◽  
Ceramic Membrane ◽  
Hybrid Membrane ◽  
Mixed Liquor

scholarly journals Effect of Mixed Liquor Volatile Suspended Solids on Membrane Fouling During Short and long-term Operation of Membrane Bioreactor

2015 ◽  
Vol 11 (21) ◽  
pp. 137-155 ◽  
Author(s):  
Edson Baltazar Estrada-Arriaga ◽  
Petia Mijaylova Nacheva ◽  
Liliana García-Sánchez
Keyword(s):  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Suspended Solids ◽  
Membrane Surface ◽  
Waste Water Treatment ◽  
Critical Flux ◽  
Term Operation ◽  
Mixed Liquor ◽  
Submerged Membrane Bioreactor ◽  
The Impact

The aim of this study was to examine the impact of different Mixed Liquor Volatile Suspended Solids (MLVSS) concentrations on membrane fouling,in a submerged Membrane Bioreactor (MBR) at short and longterm MBRoperation for waste water treatment. Three laboratory-scale in a submerged MBR system were operated under critical flux, subcritical flux,and an intermittent suction time and backwashing conditions. At short-term MBR operation with mixed liquors of 4,200 and 6,150 mg MLVSSL−1, the hydraulic resistance of membranes followed a same trajectory with averages of 5.0E+12m−1, whereas for 7,940 mg MLVSSL−1, a highresistance of up to 1.7E+13m−1was obtained. The result showed thathigh biomass concentrations decreased to permeability due to a bio-layer formed in the membrane surface and high Extracellular Polymeric Substance (EPS).

Treatment of domestic wastewater with an anaerobic ceramic membrane bioreactor (AnCMBR)

2015 ◽  
Vol 72 (12) ◽  
pp. 2301-2307 ◽  
Author(s):  
Xiaodi Yue ◽  
Yoong Keat Kelvin Koh ◽  
How Yong Ng
Keyword(s):  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Ceramic Membrane ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Ceramic Membranes ◽  
Transmembrane Pressure ◽  
Mixed Liquor ◽  
Cake Layer ◽  
Excellent Stability

In this study, a ceramic membrane with a pore size of 80 nm was incorporated into an anaerobic membrane bioreactor for excellent stability and integrity. Chemical oxygen demand (COD) removal efficiencies by biodegradation reached 78.6 ± 6.0% with mixed liquor suspended solids (MLSS) of 12.8 ± 1.2 g/L. Even though the total methane generated was 0.3 ± 0.03 L/g CODutilized, around 67.4% of it dissolved in permeate and was lost beyond collection. As a result, dissolved methane was 2.7 times of the theoretical saturating concentration calculated from Henry's law. When transmembrane pressure (TMP) of the ceramic membrane reached 30 kPa after 25.3 d, 95.2% of the total resistance was attributed to the cake layer, which made it the major contributor to membrane fouling. Compared to the mixed liquor, cake layer was rich in colloids and soluble products that could bind the solids to form a dense cake layer. The Methanosarcinaceae family preferred to attach to the ceramic membranes.

scholarly journals Membrane Fouling and Cleaning by Hybrid Membrane Bioreactor Treating Mustard Tuber Wastewater

2014 ◽  
Vol 26 (11) ◽  
pp. 3249-3252
Author(s):  
Hongxiang Chai ◽  
Qiang Jiang ◽  
Yinghua Wei ◽  
Jun Du ◽  
Jian Zhou ◽  
...  
Keyword(s):  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Hybrid Membrane

scholarly journals Hybrid membrane bioreactor for water recycling and phosphorus recovery

2006 ◽  
Vol 53 (7) ◽  
pp. 17-24 ◽  
Author(s):  
Y. Watanabe ◽  
K. Kimura
Keyword(s):  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Municipal Wastewater ◽  
Community Analysis ◽  
Hybrid Membrane ◽  
Phosphorus Recovery ◽  
Microbial Community Analysis ◽  
Low Viscosity ◽  
Ph Range ◽  
Phosphoric Acids

This paper deals with the performance of hybrid membrane bioreactor (MBR) combining the precoagulation/sedimentation and membrane bioreactor. The hybrid MBR not only produces the treated water with excellent permeate quality but also shows much lower membrane fouling than the conventional MBR. It may come from its extremely low F/M ratio to maintain the low viscosity even in the high MLSS concentration range of about 20,000 mg/L. Some results of microbial community analysis in MBRs was conducted to demonstrate the other reason for its lower membrane fouling. Hybrid MBR has a high potential to be used for the recycling use of the municipal wastewater. Coagulated sludge produced in the hybrid MBR is a promising phosphorus resource. This paper also contains a recent progress of phosphorus recovery technology, which uses a new phosphoric acids absorbent, i.e. the hexagonal mesostructured zirconium sulfate (ZS). The ZS has the extremely high adsorption capacity of phosphoric acids through anion exchange. The adsorbed phosphoric acids are released from the ZS in a high pH range of about 13.

scholarly journals Optimization of In Situ Backwashing Frequency for Stable Operation of Anaerobic Ceramic Membrane Bioreactor

Processes ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 545 ◽  
Author(s):  
Rathmalgodage Thejani Nilusha ◽  
Tuo Wang ◽  
Hongyan Wang ◽  
Dawei Yu ◽  
Junya Zhang ◽  
...  
Keyword(s):  
Membrane Fouling ◽  
Membrane Filtration ◽  
Membrane Bioreactor ◽  
Ceramic Membrane ◽  
Pure Water ◽  
Ex Situ ◽  
Stable Operation ◽  
Chemical Cleaning ◽  
Cake Layer

The cost-effective and stable operation of an anaerobic ceramic membrane bioreactor (AnCMBR) depends on operational strategies to minimize membrane fouling. A novel strategy for backwashing, filtration and relaxation was optimized for stable operation of a side stream tubular AnCMBR treating domestic wastewater at the ambient temperature. Two in situ backwashing schemes (once a day at 60 s/day, and twice a day at 60 s × 2/day) maintaining 55 min filtration and 5 min relaxation as a constant were compared. A flux level over 70% of the initial membrane flux was stabilized by in situ permeate backwashing irrespective of its frequency. The in situ backwashing by permeate once a day was better for energy saving, stable membrane filtration and less permeate consumption. Ex situ chemical cleaning after 60 days’ operation was carried out using pure water, sodium hypochlorite (NaOCl), and citric acid as the order. The dominant cake layer was effectively reduced by in situ backwashing, and the major organic foulants were fulvic acid-like substances and humic acid-like substances. Proteobacteria, Firmucutes, Epsilonbacteria and Bacteroides were the major microbes attached to the ceramic membrane fouling layer which were effectively removed by NaOCl.

scholarly journals Biomass Characteristics and Their Effect on Membrane Bioreactor Fouling

Molecules ◽  
2019 ◽  
Vol 24 (16) ◽  
pp. 2867 ◽  
Author(s):  
Petros K. Gkotsis ◽  
Anastasios I. Zouboulis
Keyword(s):  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Suspended Solids ◽  
Extracellular Polymeric Substances ◽  
Membrane Surface ◽  
Membrane Resistance ◽  
Soluble Microbial Products ◽  
Gelling Properties ◽  
Microbial Products ◽  
Soluble Part

Biomass characteristics are regarded as particularly influential for fouling in Membrane Bio-Reactors (MBRs). They primarily include the Mixed Liquor Suspended Solids (MLSS), the colloids and the Extracellular Polymeric Substances (EPS). Among them, the soluble part of EPS, which is also known as Soluble Microbial Products (SMP), is the most significant foulant, i.e., it is principally responsible for membrane fouling and affects all fundamental fouling indices, such as the Trans-Membrane Pressure (TMP) and the membrane resistance and permeability. Recent research in the field of MBRs, tends to consider the carbohydrate fraction of SMP (SMPc) the most important characteristic for fouling, mainly due to the hydrophilic and gelling properties, which are exhibited by polysaccharides and allow them to be easily attached on the membrane surface. Other wastewater and biomass characteristics, which affect indirectly membrane fouling, include temperature, viscosity, dissolved oxygen (DO), foaming, hydrophobicity and surface charge. The main methods employed for the characterization and assessment of biomass quality, in terms of filterability and fouling potential, can be divided into direct (such as FDT, SFI, TTF100, MFI, DFCM) or indirect (such as CST, TOC, PSA, RH) methods, and they are shortly presented in this review.

Performance of membrane bioreactor combined with pre-coagulation/sedimentation

2004 ◽  
Vol 4 (1) ◽  
pp. 143-149 ◽  
Author(s):  
T. Itonaga ◽  
Y. Watanabe
Keyword(s):  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Suspended Solids ◽  
Extracellular Polymeric Substances ◽  
Municipal Wastewater ◽  
Treatment Plant ◽  
Municipal Wastewater Treatment ◽  
Term Operation ◽  
Made In

This paper deals with the performance of a hybrid membrane bioreactor (MBR) combined with pre-coagulation/sedimentation. Primary clarifier effluent in a municipal wastewater treatment plant was fed into the hybrid MBR to investigate its performance during long-term operation. Pre-coagulation/sedimentation process efficiently removed the suspended solids including organic matter and phosphorus. Comparison of the hybrid MBR and conventional MBR was made in terms of the permeate quality and membrane fouling. As the organic loading to the MBR was significantly reduced by the pre-coagulation/sedimentation, production and accumulation of extracellular polymeric substances (EPS) may be limited. Therefore, the mixed liquor viscosity in the hybrid MBR was much lower than that in the conventional MBR. These effect caused by pre-coagulation/sedimentation brought a remarkable improvement in both permeate quality and membrane permeability.

Sign in / Sign up

Export Citation Format

Share Document