Evaluation of Maintenance Mode of Railway Overhead Contact System Based on Hierarchy Grey Evaluation Method

CICTP 2015 ◽  
2015 ◽  
Author(s):  
Congying Han
Keyword(s):  
Evaluation Method ◽  
Contact System ◽  
Maintenance Mode

Evaluation method for imaging plate resolution by means of phase contrast transfer function

1995 ◽  
Vol 53 ◽  
pp. 662-663 ◽  
Author(s):  
T. Oikawa ◽  
H. Kosugi ◽  
F. Hosokawa ◽  
D. Shindo ◽  
M. Kersker
Keyword(s):  
Transfer Function ◽  
Phase Contrast ◽  
Evaluation Method ◽  
Amorphous Film ◽  
Imaging Plate ◽  
X Rays ◽  
Special Shape ◽  
Contrast Transfer Function ◽  
Contrast Image ◽  
Specimen Shape

Evaluation of the resolution of the Imaging Plate (IP) has been attempted by some methods. An evaluation method for IP resolution, which is not influenced by hard X-rays at higher accelerating voltages, was proposed previously by the present authors. This method, however, requires truoblesome experimental preperations partly because specially synthesized hematite was used as a specimen, and partly because a special shape of the specimen was used as a standard image. In this paper, a convenient evaluation method which is not infuenced by the specimen shape and image direction, is newly proposed. In this method, phase contrast images of thin amorphous film are used.Several diffraction rings are obtained by the Fourier transformation of a phase contrast image of thin amorphous film, taken at a large under focus. The rings show the spatial-frequency spectrum corresponding to the phase contrast transfer function (PCTF). The envelope function is obtained by connecting the peak intensities of the rings. The evelope function is offten used for evaluation of the instrument, because the function shows the performance of the electron microscope (EM).

Combining Values

2002 ◽  
Vol 7 (2) ◽  
pp. 1-4, 12 ◽  
Author(s):  
Christopher R. Brigham
Keyword(s):  
Lower Extremity ◽  
Upper Extremity ◽  
Evaluation Method ◽  
Proximal Phalanx ◽  
Common Error ◽  
The Third ◽  
Whole Person ◽  
Impairment Ratings ◽  
Upper Extremity Impairment ◽  
The Individual

Abstract To account for the effects of multiple impairments, evaluating physicians must provide a summary value that combines multiple impairments so the whole person impairment is equal to or less than the sum of all the individual impairment values. A common error is to add values that should be combined and typically results in an inflated rating. The Combined Values Chart in the AMA Guides to the Evaluation of Permanent Impairment, Fifth Edition, includes instructions that guide physicians about combining impairment ratings. For example, impairment values within a region generally are combined and converted to a whole person permanent impairment before combination with the results from other regions (exceptions include certain impairments of the spine and extremities). When they combine three or more values, physicians should select and combine the two lowest values; this value is combined with the third value to yield the total value. Upper extremity impairment ratings are combined based on the principle that a second and each succeeding impairment applies not to the whole unit (eg, whole finger) but only to the part that remains (eg, proximal phalanx). Physicians who combine lower extremity impairments usually use only one evaluation method, but, if more than one method is used, the physician should use the Combined Values Chart.

Plasma Prekallikrein Activity in Patients with Total Hip Arthroplasty

1987 ◽  
Vol 58 (04) ◽  
pp. 1040-1042
Author(s):  
J J M L Hoffmann ◽  
J H J P M Kortmann
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Hip Prosthesis ◽  
Contact System ◽  
Factor Xii ◽  
Total Hip ◽  
Activity Factor ◽  
Patient Groups ◽  
Kallikrein Activity

SummaryThe behaviour of the contact system was studied in 40 patients with total hip arthroplasty, by measuring plasma prekallikrein, spontaneous kallikrein activity and factor XII. In the literature it had been shown that patients with complications from this operation had decreased prekallikrein and increased kallikrein activity (M. Nakahara. Acta orthop scand 1982; 53: 591-6). In the present study, comprising patients with and without pain and proven loosening of the hip prosthesis, these findings could only partially be confirmed. Patients with a loosened prosthesis had significantly lower prekallikrein (mean 0.78 ± 0.28 U/ml; p <0.01) than patients without problems, but no detectable kallikrein activity in plasma. Patients with pain but no loosening had normal prekallikrein (1.04 ±0 0.26 U/ml) and also no demonstrable kallikrein activity. Factor XII was normal in all patient groups. It is concluded that decreased prekallikrein is limited to patients with a loosened hip prosthesis, with or without pain.

Western Blot Analyses of Prekallikrein and its Activation Products in Human Plasma

1991 ◽  
Vol 65 (04) ◽  
pp. 382-388 ◽  
Author(s):  
Dulce Veloso ◽  
Robert W Colman
Keyword(s):  
Complex Formation ◽  
Western Blot ◽  
Human Plasma ◽  
Contact System ◽  
Plasma Activation ◽  
Normal Plasma ◽  
Sds Page ◽  
Activation Products ◽  
Major Antigen ◽  
Formation Of Complexes

SummaryPrekallikrein (PK), a zymogen of the contact system, and its activation products, kallikrein (KAL), KAl-inhibitor complexes and fragments containing KAL epitope(s) have been detected in human plasma by immunoblotting with a monoclonal anti-human plasma PK antibody, MAb 13G1L. Detection of antigen-MAb 13G11 complexes with peroxidase-conjugated anti-IgG showed that the two variants of PK (85- and 88-kDa) are the only major antigen species in normal, non-activated plasma. Upon plasma activation with kaolin, the intensity of the PK bands decreased with formation of complexes of KAL with CL inhibitor (C1 INH) and α2-rrtzcroglobulin (α2M) identical to those formed by the purified proteins. Immunoblots of normal plasma showed good correlation between the PK detected and the amount of plasma assayed. Increasing amounts of KAL incubated with a constant volume of PK-deficient plasma showed increasing amounts of KAL and of KAL-C1 INH and KAL-α2M complexes. Complexes of KALantithrombin III (ATIII) and the ratio of KALα2M/ KAL-CL INH were higher in activated CL INH-deficient plasmas than in activated normal plasmas. Protein resolution by 3-12% gradient SDS-PAGE and epitope detection with [125I]MAb 13G11 showed four KALα2M species and a 45-kDa fragment(s) in both surface-activated normal plasma and complexes formed by purified KAL and α2M. Immunoblots of activated plasma also showed bands at the position of KALCL INH and KALATIII complexes. When α1-antitrypsin Pittsburgh (cα1-AT, Pitts) was added to plasma before activation, KAL-α1-ALPitts was the main complex. The non-activated normal plasma revealed only an overloaded PK band. This is the first report of an antibody that recognizes KAL epitope(s) in KAL-α2M, KALATIII and KALa1-α1Pitts complexes and in the 45-kDa fragment(s). Therefore, MAb 13G11 should be useful for studying the structure of these complexes as well as the mechanism of complex formation. In addition, immunoblotting with MAb 13G11 would allow detection of KAl-inhibitor complexes in patient plasmas as indicators of activation of the contact system.

A fuzzy evaluation method of road vehicle automatic weighing instrument in dynamic force metrological performance

2020 ◽  
Vol 64 (1-4) ◽  
pp. 1365-1372
Author(s):  
Xiaohui Mao ◽  
Liping Fei ◽  
Xianping Shang ◽  
Jie Chen ◽  
Zhihao Zhao
Keyword(s):  
Evaluation Method ◽  
Comprehensive Evaluation ◽  
Evaluation Model ◽  
Dynamic Performance ◽  
Dynamic Force ◽  
Fuzzy Evaluation ◽  
Road Vehicle ◽  
Evaluation Standard ◽  
The Road ◽  
Metrological Performance

The measurement performance of road vehicle automatic weighing instrument installed on highways is directly related to the safety of roads and bridges. The fuzzy number indicates that the uncertain quantization problem has obvious advantages. By analyzing the factors affecting the metrological performance of the road vehicle automatic weighing instrument, combined with the fuzzy mathematics theory, the weight evaluation model of the dynamic performance evaluation of the road vehicle automatic weighing instrument is proposed. The factors of measurement performance are summarized and calculated, and the comprehensive evaluation standard of the metering performance of the weighing equipment is obtained, so as to realize the quantifiable analysis and evaluation of the metering performance of the dynamic road vehicle automatic weighing instrument in use, and provide data reference for adopting a more scientific measurement supervision method.

Sign in / Sign up

Export Citation Format

Share Document