Solid–liquid transitions of sodium chloride at high pressures

2006 ◽  
Vol 125 (15) ◽  
pp. 154510 ◽  
Author(s):  
Qi An ◽  
Lianqing Zheng ◽  
Rongshan Fu ◽  
Sidao Ni ◽  
Sheng-Nian Luo
Keyword(s):  
Sodium Chloride ◽  
High Pressures ◽  
Solid Liquid

DIFFUSION OF Tl+ IONS THROUGH THE INTERFACE OF SOLID NaCl, KCl OR RbCl AND LIQUID TlCl

2002 ◽  
Vol 16 (01n02) ◽  
pp. 108-113
Author(s):  
W. YU ◽  
A. FUJII
Keyword(s):  
Sodium Chloride ◽  
Single Crystals ◽  
Optical Method ◽  
Diffusion Constant ◽  
Liquid Interface ◽  
Diffusion Constants ◽  
Diffusion Phenomena ◽  
Diffusion Source ◽  
Solid Liquid Interface ◽  
Solid Liquid

The diffusion phenomena of thallous ions ( Tl + ions) through solid-liquid interface of liquid Tl + ions diffusion source and sodium chloride (NaCl) , potassium chloride (KCl) or rubidium chloride (RbCl) single crystals are studied by optical method. The characterisic absorption peaks of Tl + center in NaCl, KCl or RbCl single crystals were used as the tracer for measurements and the diffusion constants are evaluated at various temperatures. The results show that the diffusion constant of solid-liquid interface is about 103 times larger than that of solid-solid interface of KCl and TlCl .

THE PREPARATION OF SODIUM CHLORIDE OF LARGE SPECIFIC SURFACE

1952 ◽  
Vol 30 (5) ◽  
pp. 448-453 ◽  
Author(s):  
A. Craig ◽  
R. McIntosh
Keyword(s):  
Free Energy ◽  
Sodium Chloride ◽  
Specific Surface ◽  
Interfacial Free Energy ◽  
Moist Air ◽  
A Value ◽  
The One ◽  
Solid Liquid ◽  
Fundamental Units

A procedure is outlined by which sodium chloride particles of specific surface up to 50 m2 per gm. may be prepared. The particles form in chains and are found to lose area rapidly in moist air. The fundamental units of the chain do not appear cubic. Single cubic particles or chains of cubic particles also have been prepared. The one sample identified as this type had a specific surface of 18 m2 per gm. The sintering in moist air appears to occur by a process of solution and recrystallization. A value of the interfacial free energy solid–liquid is calculated from the data.

Adhesiveness of Kaolin Based Coating Material on Lumber Wood

2016 ◽  
Vol 673 ◽  
pp. 47-54 ◽  
Author(s):  
Shamala Ramasamy ◽  
Kamarudin Hussin ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Che Mohd Ruzaidi Ghazali ◽  
Andrei Victor Sandu ◽  
...  
Keyword(s):  
Sodium Chloride ◽  
Sodium Silicate ◽  
Chloride Solution ◽  
Sodium Chloride Solution ◽  
Source Material ◽  
Wood Substrate ◽  
Liquid Ratio ◽  
Morphological Studies ◽  
Alkaline Activator ◽  
Solid Liquid

Kaolin, widely used aluminosilicate source material was added with alkaline activator solution, creating geopolymer coating paste.Optimum design for kaolin based coating using geopolymer technology was studied. The work was to analyses the effect of solid liquid ratio, sodium silicate and sodium chloride ratio and sodium chloride molarity on its adhesive performances on lumber wood substrate. Upon observation, coating with 0.9 solid/liquid ratio, 0.45 sodium silicate/sodium chloride ratio and sodium chloride solution with 6M molarity shows promising adhesive strength. These results were further evident with morphological studies.

Solubility of hydrogen in sodium chloride brine at high pressures

2021 ◽  
Vol 539 ◽  
pp. 113025
Author(s):  
Geraldine A. Torín-Ollarves ◽  
J.P. Martin Trusler
Keyword(s):  
Sodium Chloride ◽  
High Pressures
Sign in / Sign up

Export Citation Format

Share Document