Note: A novel cantilever beam for low-frequency high performance piezoelectric geophone

2017 ◽  
Vol 88 (6) ◽  
pp. 066105 ◽  
Author(s):  
Yi Xin ◽  
Hongshuai Sun ◽  
Chao Guo ◽  
Xiang Li ◽  
Yang Xu ◽  
...  
2021 ◽  
Vol 11 (9) ◽  
pp. 3868
Author(s):  
Qiong Wu ◽  
Hairui Zhang ◽  
Jie Lian ◽  
Wei Zhao ◽  
Shijie Zhou ◽  
...  

The energy harvested from the renewable energy has been attracting a great potential as a source of electricity for many years; however, several challenges still exist limiting output performance, such as the package and low frequency of the wave. Here, this paper proposed a bistable vibration system for harvesting low-frequency renewable energy, the bistable vibration model consisting of an inverted cantilever beam with a mass block at the tip in a random wave environment and also develop a vibration energy harvesting system with a piezoelectric element attached to the surface of a cantilever beam. The experiment was carried out by simulating the random wave environment using the experimental equipment. The experiment result showed a mass block’s response vibration was indeed changed from a single stable vibration to a bistable oscillation when a random wave signal and a periodic signal were co-excited. It was shown that stochastic resonance phenomena can be activated reliably using the proposed bistable motion system, and, correspondingly, large-scale bistable responses can be generated to realize effective amplitude enlargement after input signals are received. Furthermore, as an important design factor, the influence of periodic excitation signals on the large-scale bistable motion activity was carefully discussed, and a solid foundation was laid for further practical energy harvesting applications.


2017 ◽  
Vol 202 ◽  
pp. 184-189 ◽  
Author(s):  
Yan Wang ◽  
Hongyu Zhu ◽  
Yanbo Chen ◽  
Xinming Wu ◽  
Wenzhi Zhang ◽  
...  

2021 ◽  
Vol 4 ◽  
Author(s):  
Stefano Markidis

Physics-Informed Neural Networks (PINN) are neural networks encoding the problem governing equations, such as Partial Differential Equations (PDE), as a part of the neural network. PINNs have emerged as a new essential tool to solve various challenging problems, including computing linear systems arising from PDEs, a task for which several traditional methods exist. In this work, we focus first on evaluating the potential of PINNs as linear solvers in the case of the Poisson equation, an omnipresent equation in scientific computing. We characterize PINN linear solvers in terms of accuracy and performance under different network configurations (depth, activation functions, input data set distribution). We highlight the critical role of transfer learning. Our results show that low-frequency components of the solution converge quickly as an effect of the F-principle. In contrast, an accurate solution of the high frequencies requires an exceedingly long time. To address this limitation, we propose integrating PINNs into traditional linear solvers. We show that this integration leads to the development of new solvers whose performance is on par with other high-performance solvers, such as PETSc conjugate gradient linear solvers, in terms of performance and accuracy. Overall, while the accuracy and computational performance are still a limiting factor for the direct use of PINN linear solvers, hybrid strategies combining old traditional linear solver approaches with new emerging deep-learning techniques are among the most promising methods for developing a new class of linear solvers.


2014 ◽  
Vol 525 ◽  
pp. 342-345
Author(s):  
Yan Zhao ◽  
Shan Shan Liu ◽  
Yu Feng Li

The piezoelectric power generating device can convert the vibration energy into electrical energy in vehicular environment. So it can provide energy for electronic components. Firstly, the mathematical model of road-vehicles-piezoelectric device coupled vibration was established under the random road excitation. Then vibration simulation analysis of the established model was made. The acceleration and spectrum of the vehicles body and its connection with the suspension were researched under B-class. The car body vibration is low-frequency vibration. Further studies shows that expanding the speed range and changing the roads level almost have no effect on the natural frequency of vehicles body vibration. Secondly, in order to make the maximum generating capacity, the influences of cantilever beam parameters have on its nature frequency were researched. The research results provide basis for parameters design in cantilever beam.


RSC Advances ◽  
2016 ◽  
Vol 6 (60) ◽  
pp. 55577-55583 ◽  
Author(s):  
Seung Yong Lee ◽  
Chang Hyuck Choi ◽  
Min Wook Chung ◽  
Jae Hoon Chung ◽  
Seong Ihl Woo

In supercapacitors, one dimensional graphene ribbons which form net-like porous structure demonstrate low mass transfer resistance at low frequency region and a consequent efficient charge transferability.


2020 ◽  
Vol 20 (3) ◽  
pp. 743-757
Author(s):  
Teng Ma ◽  
Xuezhuan Zhao

The chromatic transient visual evoked potential (CTVEP)-based brain-computer interface (BCI) can provide safer and more comfortable stimuli than the traditional VEP-based BCIs due to its low frequency change and no luminance variation in the visual stimulation. However, it still generates relatively few codes that correspond to input commands to control the outside devices, which limits its application in the practical BCIs to some extent. Aiming to obtain more codes, we firstly proposes a new time coding technique to CTVEP-based BCI by utilizing a combination of two 4-bit binary codes to construct four 8-bit binary codes to increase the control commands to extend its application in practice. In the experiment, two time-encoded isoluminant chromatic stimuli are combined to serve as different commands for BCI control, and the results show that the high performance based on the new time coding approach with the average accuracy up to 90.28% and average information transfer rate up to 27.78 bits/min for BCI can be achieved. It turns out that the BCI system based on the proposed method is feasible, stable and efficient, which makes the method very suitable for the practical application of BCIs, such as military, entertainment and medical enterprise.


Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1102 ◽  
Author(s):  
Hamidreza Heidari ◽  
Anton Rassõlkin ◽  
Toomas Vaimann ◽  
Ants Kallaste ◽  
Asghar Taheri ◽  
...  

In this paper, a new vector control strategy is proposed to reduce torque ripples and harmonic currents represented in switching table-based direct torque control (ST-DTC) of a six-phase induction motor (6PIM). For this purpose, a new set of inputs is provided for the switching table (ST). These inputs are based on the decoupled current components in the synchronous reference frame. Indeed, using both field-oriented control (FOC) and direct torque control (DTC) concepts, precise inputs are applied to the ST in order to achieve better steady-state torque response. By applying the duty cycle control strategy, the loss subspace components are eliminated through a suitable selection of virtual voltage vectors. Each virtual voltage vector is based on a combination of a large and a medium vector to make the average volt-seconds in loss subspace near to zero. Therefore, the proposed strategy not only notably reduces the torque ripples, but also suppresses the low frequency current harmonics, simultaneously. Simulation and experimental results clarify the high performance of the proposed scheme.


Energy ◽  
2019 ◽  
Vol 180 ◽  
pp. 737-750 ◽  
Author(s):  
Yi Li ◽  
Shengxi Zhou ◽  
Zhichun Yang ◽  
Tong Guo ◽  
Xutao Mei

Sign in / Sign up

Export Citation Format

Share Document