scholarly journals Analytical computation of the magnetic field of a conical permanent magnet with arbitrarily uniform magnetization

AIP Advances ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 045208
Author(s):  
Van Tai Nguyen
Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2522
Author(s):  
Guangdou Liu ◽  
Shiqin Hou ◽  
Xingping Xu ◽  
Wensheng Xiao

In the linear and planar motors, the 1D Halbach magnet array is extensively used. The sinusoidal property of the magnetic field deteriorates by analyzing the magnetic field at a small air gap. Therefore, a new 1D Halbach magnet array is proposed, in which the permanent magnet with a curved surface is applied. Based on the superposition of principle and Fourier series, the magnetic flux density distribution is derived. The optimized curved surface is obtained and fitted by a polynomial. The sinusoidal magnetic field is verified by comparing it with the magnetic flux density of the finite element model. Through the analysis of different dimensions of the permanent magnet array, the optimization result has good applicability. The force ripple can be significantly reduced by the new magnet array. The effect on the mass and air gap is investigated compared with a conventional magnet array with rectangular permanent magnets. In conclusion, the new magnet array design has the scalability to be extended to various sizes of motor and is especially suitable for small air gap applications.


2013 ◽  
Vol 753-755 ◽  
pp. 1571-1575
Author(s):  
Zhi Hua Liu ◽  
Yu Feng Huang ◽  
Jian Peng Li ◽  
Xin Wei Xu

Magnetic bead droplet's non-contacted manipulation can be realized in Electromagnetic MEMS, but how to achieve magnetic beads manipulation is the major problem. A new method of multi-layered flat coils coupled with permanent magnet was proposed. Firstly, the theory of magnetic bead manipulation was analyzed and the main factors affected the magnetic beads manipulation was identified; then the magnetic field of multi-layered flat coils and Stokes viscous resistance of magnetic beads were analyzed and simulated quantificationally; finally the magnetic bead capture area was got under different flow velocity. Consequently the feasibility and correctness of this method was verified.


2014 ◽  
Vol 525 ◽  
pp. 282-286
Author(s):  
Jia Xin You ◽  
Hui Min Liang ◽  
Kun Zhang ◽  
Guo Fu Zhai

The image of magnetic field is traditionally obtained by spreading magnetic powder manually or by sparse arrays of magnetic needles, obtaining the images of the magnetic field in different permanent magnet shapes and do repeated tests on the permanent magnet are in need. Based on programmable logic controller (PLC) motion control, the servo control and mechanical system have been built, the control strategy is discussed and the software is programmed. 2D FEM model of a test permanent magnet bar is built. Compared with the FEM simulation results, the system has achieved the goal that spreading magnetic powder quickly and evenly in the appointed area.


2011 ◽  
Vol 24 (2) ◽  
pp. 157-167 ◽  
Author(s):  
Ivan Yatchev ◽  
Krastio Hinov ◽  
Iosko Balabozov ◽  
Kristina Krasteva

Several constructions of electromagnetic actuators with moving permanent magnet for Braille screen are studied. All they are formed from a basic one that consists of two coils, core and moving permanent magnet. The finite element method is used for modeling of the magnetic field and for obtaining the electromagnetic force acting on the mover. The static force-stroke characteristics are obtained for four different constructions of the actuator. The constructions with ferromagnetic disc between the coils ensure greater force than the ones without disc and can reach the required minimum force.


2014 ◽  
Vol 46 (1) ◽  
pp. 255-269 ◽  
Author(s):  
Siddappa Iranna Bekinal ◽  
Tumkur Ramakrishna rao Anil ◽  
Soumendu Jana

2020 ◽  
Vol 15 (1) ◽  
pp. 150-160
Author(s):  
Kishor Kaphle ◽  
Gyanendra Karki ◽  
Amrit Panthi

 The magnetic field of different geometry of the permanent magnet is analytically calculated by using basic principles of the magnetism in very easier approach. Concept of origin shifting and geometrical shape transformation are used to formulate the formula for cuboidal, cubical and cylindrical permanent magnets. This concept can be used for the analysis of magnetic field distribution in space around for permanent magnet as well as electromagnet in a very easier approach. Handy and simplified software is made to calculate the magnetic field due to permanent magnet and electromagnet at any desired position on space. Magnetic field visualization is also done in both magnitude and direction by using MATLAB.  


2012 ◽  
Vol 472-475 ◽  
pp. 912-916
Author(s):  
Ding Guo Huang ◽  
Song Liu ◽  
Hong Guang Jiao ◽  
Fei Yue Wang

This new dry magnetic separator has a special structure. It has many magnetic roll which are staggered like a stairsteps. It can finish the task of separating different minerals with only this one machine. And also it can make the different magnetic material which are in the same mineral separate at the same time. The permanent magnet system is made of large fan-shaped magnet. The magnet pole N and S are staggered and has perfect performance of magnetic separation. And the magnetic force is made full use by going-up dynamic separation. And also it gives an analysis of stress in the magnetic field. It also shows that its separation idex is better, the economic benefits are obvious, and it has broader prospects of popularization and application.


2011 ◽  
Vol 52-54 ◽  
pp. 285-290
Author(s):  
Yi Chang Wu ◽  
Feng Ming Ou ◽  
Bo Wei Lin

The prediction of the magnetic field is a prerequisite to investigate the motor performance. This paper focuses on the magnetic field estimation of surface-mounted permanent-magnet (SMPM) motors based on two approximations, i.e., the magnetic circuit analysis and the finite-element analysis (FEA). An equivalent magnetic circuit model is applied to analytically evaluate the magnetic field of a SMPM motor with exterior-rotor configuration. The two-dimensional FEA is then applied to numerically calculate the magnetic field and to verify the validity of the magnetic circuit model. The results show that the errors between the analytical predictions and FEA results are less than 6%. It is of benefit to further design purposes and optimization of SMPM motors.


Sign in / Sign up

Export Citation Format

Share Document