scholarly journals Static force characteristics of electromagnetic actuators for Braille screen

2011 ◽  
Vol 24 (2) ◽  
pp. 157-167 ◽  
Author(s):  
Ivan Yatchev ◽  
Krastio Hinov ◽  
Iosko Balabozov ◽  
Kristina Krasteva
Keyword(s):  
Magnetic Field ◽  
Finite Element Method ◽  
Finite Element ◽  
Permanent Magnet ◽  
Static Force ◽  
The Finite Element Method ◽  
Electromagnetic Actuators ◽  
Minimum Force ◽  
The Magnetic Field ◽  
Force Characteristics

Several constructions of electromagnetic actuators with moving permanent magnet for Braille screen are studied. All they are formed from a basic one that consists of two coils, core and moving permanent magnet. The finite element method is used for modeling of the magnetic field and for obtaining the electromagnetic force acting on the mover. The static force-stroke characteristics are obtained for four different constructions of the actuator. The constructions with ferromagnetic disc between the coils ensure greater force than the ones without disc and can reach the required minimum force.

Modeling and Design Optimization of Contactless Sliding Transformer System for Ropeless Elevators

2013 ◽  
Vol 416-417 ◽  
pp. 264-269
Author(s):  
Pei Long Wang ◽  
Xiao Zhuo Xu ◽  
Bao Yu Du ◽  
Hai Chao Feng ◽  
Xu Dong Wang ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Finite Element Method ◽  
Finite Element ◽  
Permanent Magnet ◽  
Power Transmission ◽  
Electrical Power ◽  
Coupling Coefficients ◽  
The Finite Element Method ◽  
The Magnetic Field ◽  
Load Conditions

In this paper, two novel topological structures of sliding transformer with ferromagnetic core applied in the Contactless Electrical Power Transmission (CEPT) system used for the ropeless elevator driven by moving-coil type Permanent Magnet Synchronous Linear Motor (PMLSM) have been proposed, and the magnetic field distribution is calculated and analyzed by the finite element method (FEM). According to the analysis results of the traditional E-E topology sliding transformer, much higher coupling coefficients of sliding transformers with proposed topologies have been obtained. Then, based on the magnetic distribution and the circuit model of system, the compensation capacitances have been calculated considering supply frequency and load conditions. Finally, the load characteristic of the system with compensation is also obtained by FEM.

scholarly journals New Constitutive Matrix in the 3D Cell Method to Obtain a Lorentz Electric Field in a Magnetic Brake

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3185 ◽  
Author(s):  
José Monzón-Verona ◽  
Pablo González-Domínguez ◽  
Santiago García-Alonso
Keyword(s):  
Magnetic Field ◽  
Finite Element Method ◽  
Finite Element ◽  
Computer Applications ◽  
The Finite Element Method ◽  
Cell Method ◽  
Hall Sensors ◽  
Constitutive Matrix ◽  
The Magnetic Field ◽  
Made In

In this work, we have obtained a new constitutive matrix to calculate the induced Lorentz electric current of in a conductive disk in movement within a magnetic field using the cell method in 3D. This disk and a permanent magnet act as a magnetic brake. The results obtained are compared with those obtained with the finite element method (FEM) using the computer applications Getdp and femm. The error observed is less than 0.1173%. Likewise, a second verification has been made in the laboratory using Hall sensors to measure the magnetic field in the proximity of the magnetic brake.

scholarly journals The numeric evaluation of the magnetic field produced by a rotor with alternating poles

2005 ◽  
Vol 2 (2) ◽  
pp. 181-188
Author(s):  
Marian Greconici ◽  
Constantin Blaj ◽  
Barbu Nicoară
Keyword(s):  
Magnetic Field ◽  
Finite Element Method ◽  
Finite Element ◽  
Magnetic Fluid ◽  
The Finite Element Method ◽  
3D Fem ◽  
Hydrostatic Bearing ◽  
Magnetic Poles ◽  
The Magnetic Field ◽  
Element Method

The magnetic field produced by a rotor with alternating magnetic poles in a magnetic fluid hydrostatic bearing is numerically evaluated. There has been used a 3D program based on the finite element method (3D-FEM).

Design and Analysis of a Novel 2-D Permanent Magnet Array for Planar Actuator

2013 ◽  
Vol 416-417 ◽  
pp. 253-257
Author(s):  
Liang Guo ◽  
Hao Ding
Keyword(s):  
Magnetic Field ◽  
Finite Element Method ◽  
Finite Element ◽  
Magnetic Fields ◽  
Permanent Magnet ◽  
3D Finite Element ◽  
3D Finite Element Method ◽  
Magnetic Poles ◽  
The Magnetic Field ◽  
Element Method

A novel 2-D permanent magnet array for a planar actuator was proposed, in which the portion between adjacent magnetic poles was divided to four small rectangular solids. Magnetic fields of the permanent magnet array were analyzed systematically by 3D finite element method. The analysis results show that, compared with the well-known Halbach magnet array, the proposed array has higher permanent magnet utilization. Keeping the whole permanent magnet volume constant, the arrays with several improved structures were put forward. The magnetic field analyze results prove that the utilization is best, when the ratio between the height of the magnetic poles magnetized vertically and the height of the portion magnetized horizontally is about 2.

Basic Statements of Research and Magnetic Field of Axial Excitation Inductor Generator

2011 ◽  
Vol 28 (1) ◽  
pp. 49-52
Author(s):  
Igors Stroganovs ◽  
Andrejs Zviedris
Keyword(s):  
Magnetic Field ◽  
Finite Element Method ◽  
Finite Element ◽  
Magnetic Flux ◽  
Magnetic System ◽  
System Optimization ◽  
Magnetic Saturation ◽  
The Finite Element Method ◽  
Flux Linkage ◽  
Axial Excitation

Basic Statements of Research and Magnetic Field of Axial Excitation Inductor GeneratorIn this work the main features of axial excitation inductor generators are described. Mathematical simulation of a magnetic field is realized by using the finite element method. The objective of this work is to elucidate how single elements shape, geometric dimensions and magnetic saturation of magnetic system affect the main characteristics of the field (magnetic induction, magnetic flux linkage). The main directions of a magnetic system optimization are specified.

Finite-Element Analysis of Magnetoelastic Buckling of Ferromagnetic Beam Plate

1980 ◽  
Vol 47 (2) ◽  
pp. 377-382 ◽  
Author(s):  
K. Miya ◽  
T. Takagi ◽  
Y. Ando
Keyword(s):  
Magnetic Field ◽  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Experimental Results ◽  
The Finite Element Method ◽  
Magnetic Torque ◽  
Element Analysis ◽  
Element Method

Some corrections have been made hitherto to explain the great discrepancy between experimental and theoretical values of the magnetoelastic buckling field of a ferromagnetic beam plate. To solve this problem, the finite-element method was applied. A magnetic field and buckling equations of the ferromagnetic beam plate finite in size were solved numerically assuming that the magnetic torque is proportional to the rotation of the plate and by using a disturbed magnetic torque deduced by Moon. Numerical and experimental results agree well with each other within 25 percent.

Sign in / Sign up

Export Citation Format

Share Document