Statistical analysis of deformation of a shock wave propagating in a local turbulent region

Cluster–impact nuclear fusion is analyzed via a shock–wave model. We show that shock waves can be generated by clusters. Energy loss mechanisms are considered, and the conditions when they are not negligible are determined. Our theoretical model indicates that shock–wave enhanced fusion temperatures are possible with molecular size clusters impacting upon hydrogen isotope targets, somewhat as envisioned by Winterberg and Harrison for macro–projectiles. Our theory explains and reproduces the yields from known target and cluster compositions, as a function of cluster size and energy. Predictions are made, and new tests proposed. We show that contaminants are an unlikely artifact in the experimental data.

Download Full-text

Statistical analysis of classification

Symposium - International Astronomical Union ◽

10.1017/s0074180900053420 ◽

1966 ◽

Vol 24 ◽

pp. 188-189

Author(s):

T. J. Deeming

Keyword(s):

Multivariate Analysis ◽

Statistical Analysis ◽

Classification Scheme ◽

Analytical Procedure ◽

Narrow Band ◽

Scientific Research ◽

Maximum Amount ◽

Amount Of Information

If we make a set of measurements, such as narrow-band or multicolour photo-electric measurements, which are designed to improve a scheme of classification, and in particular if they are designed to extend the number of dimensions of classification, i.e. the number of classification parameters, then some important problems of analytical procedure arise. First, it is important not to reproduce the errors of the classification scheme which we are trying to improve. Second, when trying to extend the number of dimensions of classification we have little or nothing with which to test the validity of the new parameters.Problems similar to these have occurred in other areas of scientific research (notably psychology and education) and the branch of Statistics called Multivariate Analysis has been developed to deal with them. The techniques of this subject are largely unknown to astronomers, but, if carefully applied, they should at the very least ensure that the astronomer gets the maximum amount of information out of his data and does not waste his time looking for information which is not there. More optimistically, these techniques are potentially capable of indicating the number of classification parameters necessary and giving specific formulas for computing them, as well as pinpointing those particular measurements which are most crucial for determining the classification parameters.

Download Full-text

A new type of defect structure in 124-superconducting oxide revealed by HREM

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100089779 ◽

1991 ◽

Vol 49 ◽

pp. 1092-1093

Author(s):

R. Sharma ◽

B.L. Ramakrishna ◽

N.N. Thadhani ◽

D. Hianes ◽

Z. Iqbal

Keyword(s):

Shock Wave ◽

Defect Structure ◽

Neutron Radiation ◽

Weak Links ◽

Defect Structures ◽

New Materials ◽

New Type ◽

Current Densities ◽

Processing Techniques ◽

Microstructural Studies

After materials with superconducting temperatures higher than liquid nitrogen have been prepared, more emphasis has been on increasing the current densities (Jc) of high Tc superconductors than finding new materials with higher transition temperatures. Different processing techniques i.e thin films, shock wave processing, neutron radiation etc. have been applied in order to increase Jc. Microstructural studies of compounds thus prepared have shown either a decrease in gram boundaries that act as weak-links or increase in defect structure that act as flux-pinning centers. We have studied shock wave synthesized Tl-Ba-Cu-O and shock wave processed Y-123 superconductors with somewhat different properties compared to those prepared by solid-state reaction. Here we report the defect structures observed in the shock-processed Y-124 superconductors.

Download Full-text

Quantitative parallel EELS spectrum imaging developed as a new tool in AEM

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010013064x ◽

1992 ◽

Vol 50 (2) ◽

pp. 1202-1203

Author(s):

Gianluigi Botton ◽

Gilles L'espérance

Keyword(s):

Statistical Analysis ◽

Spatial Resolution ◽

Personal Computer ◽

Systematic Study ◽

Present Author ◽

Chemical Elements ◽

Detection Limits ◽

Research Groups ◽

Quantitative Performance ◽

Spectrum Imaging

As interest for parallel EELS spectrum imaging grows in laboratories equipped with commercial spectrometers, different approaches were used in recent years by a few research groups in the development of the technique of spectrum imaging as reported in the literature. Either by controlling, with a personal computer both the microsope and the spectrometer or using more powerful workstations interfaced to conventional multichannel analysers with commercially available programs to control the microscope and the spectrometer, spectrum images can now be obtained. Work on the limits of the technique, in terms of the quantitative performance was reported, however, by the present author where a systematic study of artifacts detection limits, statistical errors as a function of desired spatial resolution and range of chemical elements to be studied in a map was carried out The aim of the present paper is to show an application of quantitative parallel EELS spectrum imaging where statistical analysis is performed at each pixel and interpretation is carried out using criteria established from the statistical analysis and variations in composition are analyzed with the help of information retreived from t/γ maps so that artifacts are avoided.

Download Full-text

Investigation of shock-wave deformation history from recovered structure

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100143754 ◽

1986 ◽

Vol 44 ◽

pp. 434-435

Author(s):

M.A. Mogilevsky ◽

L.S. Bushnev

Keyword(s):

Shock Wave ◽

Plastic Deformation ◽

Dislocation Density ◽

Shock Waves ◽

Shock Front ◽

Single Crystals ◽

Residual Deformation ◽

Deformation Structure ◽

Deformation History ◽

Deformation Velocity

Single crystals of Al were loaded by 15 to 40 GPa shock waves at 77 K with a pulse duration of 1.0 to 0.5 μs and a residual deformation of ∼1%. The analysis of deformation structure peculiarities allows the deformation history to be re-established.After a 20 to 40 GPa loading the dislocation density in the recovered samples was about 1010 cm-2. By measuring the thickness of the 40 GPa shock front in Al, a plastic deformation velocity of 1.07 x 108 s-1 is obtained, from where the moving dislocation density at the front is 7 x 1010 cm-2. A very small part of dislocations moves during the whole time of compression, i.e. a total dislocation density at the front must be in excess of this value by one or two orders. Consequently, due to extremely high stresses, at the front there exists a very unstable structure which is rearranged later with a noticeable decrease in dislocation density.

Download Full-text

Electron microscopy study of shock synthesis of silicides

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100151647 ◽

1993 ◽

Vol 51 ◽

pp. 1162-1163

Author(s):

Kenneth S. Vecchio

Keyword(s):

Shock Wave ◽

Plastic Deformation ◽

Close Contact ◽

Microscopy Study ◽

High Energy ◽

Electron Microscopy Study ◽

Powder Materials ◽

Porous Powder ◽

Wave Effects ◽

Wave Passage

Shock-induced reactions (or shock synthesis) have been studied since the 1960’s but are still poorly understood, partly due to the fact that the reaction kinetics are very fast making experimental analysis of the reaction difficult. Shock synthesis is closely related to combustion synthesis, and occurs in the same systems that undergo exothermic gasless combustion reactions. The thermite reaction (Fe2O3 + 2Al -> 2Fe + Al2O3) is prototypical of this class of reactions. The effects of shock-wave passage through porous (powder) materials are complex, because intense and non-uniform plastic deformation is coupled with the shock-wave effects. Thus, the particle interiors experience primarily the effects of shock waves, while the surfaces undergo intense plastic deformation which can often result in interfacial melting. Shock synthesis of compounds from powders is triggered by the extraordinarily high energy deposition rate at the surfaces of the powders, forcing them in close contact, activating them by introducing defects, and heating them close to or even above their melting temperatures.

Download Full-text