Controlling microbial problems when processing seeds and powdered foods is difficult due to their low water activity, irregular surfaces, and opaqueness. Moreover, existing thermal processing can readily cause various undesirable changes in sensory properties. Intense pulsed light (IPL) can be effective in nonthermal processing, and so two xenon lamps were attached to the sides of a self-designed cyclone type of pilot-scale IPL device. Each lamp was connected to its own power supply, and the following treatment conditions were applied to four sample types: lamp DC voltage of 1800–4200 V, pulse width of 0.5–1.0 ms, frequency of 2 Hz, and treatment time of 1–5 min. This device achieved reductions of 0.45, 0.66, and 0.88 log CFU/mL for ground black pepper, red pepper, and embryo buds of rice, respectively, under a total energy fluence of 12.31 J/cm2. Meanwhile, >3-log reductions were achieved for sesame seed samples under a total energy fluence of 11.26 J/cm2. In addition, analyses of color changes, water activity, and moisture content revealed no significant differences between the control and IPL-treated samples. These findings indicate that IPL treatment may be considered a feasible sterilization method for seeds and powdered foods.
Suitability of Copper Nitride as a Wiring Ink Sintered by Low-Energy Intense Pulsed Light Irradiation
