New exploration opportunities along Australia's southern margin

2012 ◽  
Vol 52 (1) ◽  
pp. 29
Author(s):  
Totterdell Jennie
Keyword(s):  
Lacustrine Sediments ◽  
Source Rocks ◽  
Eastern Basin ◽  
Petroleum Systems ◽  
Structural Framework ◽  
Southern Margin ◽  
Release Area ◽  
Geological Control ◽  
Gippsland Basin ◽  
Deepwater Part

The 2012 Australian offshore acreage release includes exploration areas in four southern margin basins. Three large Release Areas in the frontier Ceduna Sub-basin lie adjacent to four exploration permits granted in 2011. The petroleum prospectivity of the Ceduna Sub-basin is controlled by the distribution of Upper Cretaceous marine and deltaic facies and a structural framework established by Cenomanian growth faulting. These Release Areas offer a range of plays charged by Cretaceous marine and coaly source rocks and Jurassic lacustrine sediments. In the westernmost part of the gas-producing Otway Basin, a large Release Area offers numerous opportunities to test existing and new play concepts in underexplored areas beyond the continental shelf. Gas and oil shows in the eastern part of the Release Area confirm the presence of at least two working petroleum systems. In the eastern Otway Basin, several Release Areas are offered in shallow water on the eastern flank of the highly prospective Shipwreck Trough and provide untested targets along the eastern basin margin southward into Tasmanian waters. To the south, a large Release Area in the frontier Sorell Basin provides the opportunity to explore a range of untested targets in depocentres that formed along the western Tasmanian transform continental margin. Two Release Areas offer exploration potential in the under-explored eastern deepwater part of the Gippsland Basin. Geological control is provided by several successful wells indicating the presence of both gas and liquids in the northern area, while the southern area represents the remaining frontier of the basin

GEOCHEMICAL CHARACTERISTICS OF AUSTRALIA'S SOUTHERN MARGIN PETROLEUM SYSTEMS

1999 ◽  
Vol 39 (1) ◽  
pp. 297 ◽  
Author(s):  
D.S. Edwards ◽  
H.I.M. Struckmeyer ◽  
M.T. Bradshaw ◽  
J.E. Skinner
Keyword(s):  
Upper Cretaceous ◽  
Petroleum System ◽  
Geochemical Characteristics ◽  
Source Rocks ◽  
Liquid Hydrocarbons ◽  
Petroleum Systems ◽  
Tectonic History ◽  
Southern Margin ◽  
History Of ◽  
Oil Source

The hydrocarbons discovered to date on the southern margin of Australia have been assigned to the Austral Petroleum Supersystem based on the age of their source rocks and common tectonic history. Modelling of the source facies distribution within this supersystem using tectonic, climatic and geographic history of the southern margin basins, suggests the presence of a variety of source rocks deposited in saline playa lakes, fluvial, lacustrine, deltaic and anoxic marine environments.Testing of the palaeogeographic model using geochemical characteristics of liquid hydrocarbons confirms the three-fold subdivision (Al, A2 and A3) of the Austral Petroleum Supersystem.Bass Basin oils are assigned to the Austral 3, Eastern View Petroleum System. The presence of oleanane in the biomarker assemblages of these oils, together with their negatively sloping, heavy, isotopic profiles, indicate derivation from Upper Cretaceous-Tertiary fluvio–deltaic source facies.In the eastern Otway Basin, oils of the Austral 2, Eumeralla Petroleum System are sourced by Lower Cretaceous (Aptian–Albian) coaly facies. Oil shows reservoired in the Wigunda Formation at Greenly-1 in the Duntroon Basin are possibly sourced from the Borda Formation and are assigned to the Austral 2, Borda Petroleum System.In the western Otway, Duntroon and Bight basins, a lack of definitive oil-source rock correlations precludes the identification of individual Austral 1 petroleum systems.

Geochemical underpinnings of Australia's offshore hydrocarbon prospectivity

2014 ◽  
Vol 54 (1) ◽  
pp. 415
Author(s):  
Marita Bradshaw ◽  
Dianne Edwards ◽  
Chris Boreham ◽  
Emmanuelle Grosjean ◽  
Jennifer Totterdell ◽  
...  
Keyword(s):  
Source Rock ◽  
Lower Triassic ◽  
Source Rocks ◽  
Petroleum Systems ◽  
Isotopic Analyses ◽  
Marine Source ◽  
History Of ◽  
Hydrocarbon Sources ◽  
Geochemical Analyses ◽  
Gippsland Basin

Molecular and isotopic analyses of oils and gases can provide information on the depositional environment, maturation and age of their source rocks, and the post expulsion history of the hydrocarbons generated. Source rock analyses can determine their potential to generate hydrocarbons of varying type over specific thermal ranges, as well as demonstrating the strength of oil- or gas-to-source correlations. Together, this geochemical interpretation can provide insights about the extent of petroleum systems and can help delineate the relationships between hydrocarbon occurrences in a basin and across the continent. Oils that do not fit the well-established framework of oil families and Australian petroleum systems point to new source rock fairways. Examples include vagrant oils with lacustrine affinities found at various locations on the western Australian margin. Other examples are oil occurrences in the Gippsland Basin whose geochemical signatures contrast with the dominant non-marine oils, supporting the existence of a viable marine source rock facies. In under-explored and frontier basins, geochemical analyses of potential source rocks can provide key evidence to underpin new exploration efforts. For example, the recent acreage uptake in the Bight Basin was supported by Geoscience Australia’s recovery and analysis of oil-prone marine source rocks, and in the northern Perth Basin by new geochemical analysis extending the distribution of Lower Triassic Hovea marine source rocks offshore. Geoscience Australia has now embarked on a regional petroleum geological program that includes a national source rock study aimed at identifying and characterising Australia’s hydrocarbon sources, families and systems.

scholarly journals NEW GEOCHEMICAL INSIGHTS INTO CENOZOIC SOURCE ROCKS IN AZERBAIJAN: IMPLICATIONS FOR PETROLEUM SYSTEMS IN THE SOUTH CASPIAN REGION

2021 ◽  
Vol 44 (3) ◽  
pp. 349-384 ◽  
Author(s):  
V. Aghayeva ◽  
R. F. Sachsenhofer ◽  
C.G.C. van Baak ◽  
A. Bechtel ◽  
T. M. Hoyle ◽  
...  
Keyword(s):  
Source Rocks ◽  
Caspian Region ◽  
The South ◽  
Petroleum Systems

The structural framework of the southern margin of the Limpopo Belt, South Africa

1992 ◽  
Vol 55 (1-4) ◽  
pp. 51-67 ◽  
Author(s):  
C.A. Smit ◽  
C. Roering ◽  
D.D. van Reenen
Keyword(s):  
South Africa ◽  
Structural Framework ◽  
Southern Margin ◽  
Limpopo Belt

Research for the Upstream Petroleum Sector: The Crown Research Institute Concept

1995 ◽  
Vol 13 (2-3) ◽  
pp. 245-252
Author(s):  
J M Beggs
Keyword(s):  
New Zealand ◽  
Oil And Gas ◽  
Sedimentary Basins ◽  
Source Rocks ◽  
Publicly Funded ◽  
Petroleum Systems ◽  
Oil And Gas Resources ◽  
Petroleum Sector ◽  
Geological Sciences ◽  
Research Institute

New Zealand's scientific institutions have been restructured so as to be more responsive to the needs of the economy. Exploration for and development of oil and gas resources depend heavily on the geological sciences. In New Zealand, these activities are favoured by a comprehensive, open-file database of the results of previous work, and by a historically publicly funded, in-depth knowledge base of the extensive sedimentary basins. This expertise is now only partially funded by government research contracts, and increasingly undertakes contract work in a range of scientific services to the upstream petroleum sector, both in New Zealand and overseas. By aligning government-funded research programmes with the industry's knowledge needs, there is maximum advantage in improving the understanding of the occurrence of oil and gas resources. A Crown Research Institute can serve as an interface between advances in fundamental geological sciences, and the practical needs of the industry. Current publicly funded programmes of the Institute of Geological and Nuclear Sciences include a series of regional basin studies, nearing completion; and multi-disciplinary team studies related to the various elements of the petroleum systems of New Zealand: source rocks and their maturation, migration and entrapment as a function of basin structure and tectonics, and the distribution and configuration of reservoir systems.

scholarly journals Oil generation from coal source rocks: the influence of depositional conditions and stratigraphic age

2005 ◽  
Vol 7 ◽  
pp. 9-12 ◽  
Author(s):  
Henrik I. Petersen
Keyword(s):  
North Sea ◽  
Liquid Hydrocarbon ◽  
Source Rocks ◽  
Hydrocarbon Generation ◽  
Oil Generation ◽  
Generation Capacity ◽  
The Subject ◽  
Coal Composition ◽  
Gippsland Basin ◽  
Australasian Region

Although it was for many years believed that coals could not act as source rocks for commercial oil accumulations, it is today generally accepted that coals can indeed generate and expel commercial quantities of oil. While hydrocarbon generation from coals is less well understood than for marine and lacustrine source rocks, liquid hydrocarbon generation from coals and coaly source rocks is now known from many parts of the world, especially in the Australasian region (MacGregor 1994; Todd et al. 1997). Most of the known large oil accumulations derived from coaly source rocks have been generated from Cenozoic coals, such as in the Gippsland Basin (Australia), the Taranaki Basin (New Zealand), and the Kutei Basin (Indonesia). Permian and Jurassic coal-sourced oils are known from, respectively, the Cooper Basin (Australia) and the Danish North Sea, but in general only minor quantities of oil appear to be related to coals of Permian and Jurassic age. In contrast, Carboniferous coals are only associated with gas, as demonstrated for example by the large gas deposits in the southern North Sea and The Netherlands. Overall, the oil generation capacity of coals seems to increase from the Carboniferous to the Cenozoic. This suggests a relationship to the evolution of more complex higher land plants through time, such that the highly diversified Cenozoic plant communities in particular have the potential to produce oil-prone coals. In addition to this overall vegetational factor, the depositional conditions of the precursor mires influenced the generation potential. The various aspects of oil generation from coals have been the focus of research at the Geological Survey of Denmark and Greenland (GEUS) for several years, and recently a worldwide database consisting of more than 500 coals has been the subject of a detailed study that aims to describe the oil window and the generation potential of coals as a function of coal composition and age.

Hydrocarbon fluid inclusions in the Argo salt, offshore Canadian Atlantic margin

2013 ◽  
Vol 50 (6) ◽  
pp. 607-635 ◽  
Author(s):  
Yawooz A. Kettanah
Keyword(s):  
Fluid Inclusions ◽  
Fluorescent Microscopy ◽  
Freezing Temperature ◽  
Homogenization Temperature ◽  
Source Rocks ◽  
Late Triassic ◽  
Peritectic Temperature ◽  
Petroleum Systems ◽  
Initial Melting ◽  
Atlantic Margin

Fluid inclusions hosted in rock salt from the Triassic Argo Formation in the Canadian Atlantic continental margin were studied to investigate the nature and origin of petroleum fluids in them. Inclusions were studied in two wells: Glooscap-C63 and Weymouth-A45. The pillow-shaped salt body intersected by the Glooscap-C63 well is autochthonous, and the salt is transparent and colorless compared with that in the allochthonous, canopy–diaper-shaped body cut by the Weymouth-A45 well which is translucent and buff-colored. Aqueous (AFI), petroleum (PFI), and heterogeneously trapped, mixed petroleum – aqueous (MFI) fluid inclusions were identified using transmitted and fluorescent microscopy, and representative samples were analyzed microthermometrically. Petroleum-bearing fluid inclusions (PFI and MFI) are more common and contain more concentrated petroleum phases in the allochthonous salts of Weymouth-A45 well. Based on microthermometric studies, the AFI and MFI in Glooscap-C63 salt mostly belong to NaCl–H2O and NaCl–H2O–petroleum systems, respectively; in contrast, those of Weymouth-A45 belong to NaCl–MgCl2–H2O and (or) NaCl–CaCl2–H2O and NaCl–MgCl2–H2O–petroleum and (or) NaCl–CaCl2–H2O–petroleum systems, respectively. Each of the AFI, PFI, and MFI types consists of different phases. The medians of Tf (freezing temperature), Tim (initial melting temperature), Te (Eutectic temperature), Tm (final melting (peritectic) temperature), and Th (homogenization temperature) in the AFI and MFI in the salts of Glooscap-C63 well are (−82, −75 °C), (−39, −38 °C), (−25, −24 °C), (−1.8, −3 °C), and (291, 287 °C), respectively. The corresponding medians for the Weymouth-A45 well are (−71, −78 °C), (−52, −52 °C), (−37, −38 °C), (−2.7, −3 °C), and (122, 20 °C), respectively. The median Th of PFI in Glooscap-C63 and Weymouth-A45 salts are 79 and 23 °C, respectively. The most probable source rocks for the petroleum are the shales of the Late Triassic – Early Jurassic Eurydice Formation which is widely distributed at depth underlying the Argo salt.

Petroleum systems and results of exploration on the Atlantic margins of the UK, Faroes & Ireland: what have we learnt?

2016 ◽  
Vol 8 (1) ◽  
pp. 187-197 ◽  
Author(s):  
Iain C. Scotchman ◽  
Anthony G. Doré ◽  
Anthony M. Spencer
Keyword(s):  
Upper Jurassic ◽  
Petroleum System ◽  
Source Rocks ◽  
Gas Field ◽  
Petroleum Systems ◽  
Unknown Source ◽  
Porcupine Basin ◽  
Break Up ◽  
Northern North Sea ◽  
The Uk

AbstractThe exploratory drilling of 200 wildcat wells along the NE Atlantic margin has yielded 30 finds with total discovered resources of c. 4.1×109 barrels of oil equivalent (BOE). Exploration has been highly concentrated in specific regions. Only 32 of 144 quadrants have been drilled, with only one prolific province discovered – the Faroe–Shetland Basin, where 23 finds have resources totalling c. 3.7×109 BOE. Along the margin, the pattern of discoveries can best be assessed in terms of petroleum systems. The Faroe–Shetland finds belong to an Upper Jurassic petroleum system. On the east flank of the Rockall Basin, the Benbecula gas and the Dooish condensate/gas discoveries have proven the existence of a petroleum system of unknown source – probably Upper Jurassic. The Corrib gas field in the Slyne Basin is evidence of a Carboniferous petroleum system. The three finds in the northern Porcupine Basin are from Upper Jurassic source rocks; in the south, the Dunquin well (44/23-1) suggests the presence of a petroleum system there, but of unknown source. This pattern of petroleum systems can be explained by considering the distribution of Jurassic source rocks related to the break-up of Pangaea and marine inundations of the resulting basins. The prolific synrift marine Upper Jurassic source rock (of the Northern North Sea) was not developed throughout the pre-Atlantic Ocean break-up basin system west of Britain and Ireland. Instead, lacustrine–fluvio-deltaic–marginal marine shales of predominantly Late Jurassic age are the main source rocks and have generated oils throughout the region. The structural position, in particular relating to the subsequent Early Cretaceous hyperextension adjacent to the continental margin, is critical in determining where this Upper Jurassic petroleum system will be most effective.

Resolving thermal histories via multi-kinetic apatite fission track data: A case study from Phanerozoic strata within the Peel Plateau NWT, Canada

2021 ◽  
Author(s):  
Jennifer Spalding ◽  
Jeremy Powell ◽  
David Schneider ◽  
Karen Fallas
Keyword(s):  
Low Temperature ◽  
Thermal History ◽  
Fission Track ◽  
Sedimentary Basins ◽  
Source Rocks ◽  
Apatite Fission Track ◽  
Petroleum Systems ◽  
History Of ◽  
Thermal Histories ◽  
Peel Plateau

<p>Resolving the thermal history of sedimentary basins through geological time is essential when evaluating the maturity of source rocks within petroleum systems. Traditional methods used to estimate maximum burial temperatures in prospective sedimentary basin such as and vitrinite reflectance (%Ro) are unable to constrain the timing and duration of thermal events. In comparison, low-temperature thermochronology methods, such as apatite fission track thermochronology (AFT), can resolve detailed thermal histories within a temperature range corresponding to oil and gas generation. In the Peel Plateau of the Northwest Territories, Canada, Phanerozoic sedimentary strata exhibit oil-stained outcrops, gas seeps, and bitumen occurrences. Presently, the timing of hydrocarbon maturation events are poorly constrained, as a regional unconformity at the base of Cretaceous foreland basin strata indicates that underlying Devonian source rocks may have undergone a burial and unroofing event prior to the Cretaceous. Published organic thermal maturity values from wells within the study area range from 1.59 and 2.46 %Ro for Devonian strata and 0.54 and 1.83 %Ro within Lower Cretaceous strata. Herein, we have resolved the thermal history of the Peel Plateau through multi-kinetic AFT thermochronology. Three samples from Upper Devonian, Lower Cretaceous and Upper Cretaceous strata have pooled AFT ages of 61.0 ± 5.1 Ma, 59.5 ± 5.2 and 101.6 ± 6.7 Ma, respectively, and corresponding U-Pb ages of 497.4 ± 17.5 Ma (MSWD: 7.4), 353.5 ± 13.5 Ma (MSWD: 3.1) and 261.2 ± 8.5 Ma (MSWD: 5.9). All AFT data fail the χ<sup>2</sup> test, suggesting AFT ages do not comprise a single statistically significant population, whereas U-Pb ages reflect the pre-depositional history of the samples and are likely from various provenances. Apatite chemistry is known to control the temperature and rates at which fission tracks undergo thermal annealing. The r<sub>mro</sub> parameter uses grain specific chemistry to predict apatite’s kinetic behaviour and is used to identify kinetic populations within samples. Grain chemistry was measured via electron microprobe analysis to derive r<sub>mro</sub> values and each sample was separated into two kinetic populations that pass the χ<sup>2</sup> test: a less retentive population with ages ranging from 49.3 ± 9.3 Ma to 36.4 ± 4.7 Ma, and a more retentive population with ages ranging from 157.7 ± 19 Ma to 103.3 ± 11.8 Ma, with r<sub>mr0</sub> benchmarks ranging from 0.79 and 0.82. Thermal history models reveal Devonian strata reached maximum burial temperatures (~165°C-185°C) prior to late Paleozoic to Mesozoic unroofing, and reheated to lower temperatures (~75°C-110°C) in the Late Cretaceous to Paleogene. Both Cretaceous samples record maximum burial temperatures (75°C-95°C) also during the Late Cretaceous to Paleogene. These new data indicate that Devonian source rocks matured prior to deposition of Cretaceous strata and that subsequent burial and heating during the Cretaceous to Paleogene was limited to the low-temperature threshold of the oil window. Integrating multi-kinetic AFT data with traditional methods in petroleum geosciences can help unravel complex thermal histories of sedimentary basins. Applying these methods elsewhere can improve the characterisation of petroleum systems.</p>

Comparisons of pyrolysis parameters between source rocks and their clay-sized fractions: Implication for source material of hydrocarbon generation

2022 ◽  
pp. 1-42
Author(s):  
Xiaojun Zhu ◽  
Jingong Cai ◽  
Feng Liu ◽  
Qisheng Zhou ◽  
Yue Zhao ◽  
...  
Keyword(s):  
Organic Carbon ◽  
Source Material ◽  
Source Rocks ◽  
Natural Environments ◽  
Hydrocarbon Generation ◽  
Petroleum Systems ◽  
Organic Mineral ◽  
Organic Clay ◽  
Organo Clay ◽  
Rock Eval

In natural environments, organic-clay interactions are strong and cause organo-clay composites (a combination between organic matter [OM] and clay minerals) to be one of the predominant forms for OM occurrence, and their interactions greatly influence the hydrocarbon (HC) generation of OM within source rocks. However, despite occurring in nature, dominating the OM occurrence, and having unique HC generation ways, organo-clay composites have rarely been investigated as stand-alone petroleum precursors. To improve this understanding, we have compared the Rock-Eval pyrolysis parameters derived from more than 100 source rocks and their corresponding <2 μm clay-sized fractions (representing organo-clay composites). The results show that all of the Rock-Eval pyrolysis parameters in bulk rocks are closely positively correlated with those in their clay-sized fractions, but in clay-sized fractions the quality of OM for HC generation is poorer, in that the pyrolysable organic carbon levels and hydrogen index values are lower, whereas the residual organic carbon levels are higher than those in bulk rocks. Being integrated with the effects of organic-clay interactions on OM occurrence and HC generation, our results suggest that organo-clay composites are stand-alone petroleum precursors for HC generation occurring in source rocks, even if the source rocks exist in great varieties in their attributes. Our source material for HC generation comprehensively integrates the original OM occurrence and HC generation behavior in natural environments, which differs from kerogen and is much closer to the actual source material of HC generation in source rocks, and it calls for further focus on organic-mineral interactions in studies of petroleum systems.

Sign in / Sign up

Export Citation Format

Share Document