Facies architecture of the K10 supersequence in the Browse Basin: when sequence stratigraphy meets lithostratigraphy

2016 ◽  
Vol 56 (2) ◽  
pp. 568
Author(s):  
Steve Abbott ◽  
Kamal Khider ◽  
Andrew Kelman ◽  
Karen Romine

Regional seismic sequence stratigraphic mapping of the K10 supersequence (Berriasian–Valanginian) has brought into focus the relationship between sequence stratigraphic and lithostratigraphic units. In this extended abstract, the relationship between seismically-defined sandstone bodies and the Brewster Member, an important exploration target and reservoir in the Browse Basin, is investigated. Deposition of the K10 supersequence started at the onset of rifting between Greater India and the Northern Carnarvon Basin. Sediment sourced from uplifted areas resulted in deposition of the Barrow Delta in the Exmouth and Barrow sub-basins. In the Browse Basin, K10 is also a sand-rich progradational sequence, albeit diminutive compared to the Barrow Delta. Seismic mapping of K10 in the Caswell Sub-basin has resolved stratal geometries and, with the integration of well data, recognition gross depositional facies. Sandstone-prone siliciclastic platform facies (clinoform topsets) include the Brewster Member. The first reference to the Brewster Member in the Australian Stratigraphic Units Database applied the name to the upper part of the K10 sequence between 3,284 m and 3,405 m in Heywood–1. Usage of this name, however, has been inconsistently applied to sandstone-prone units within K10. Given the significance of the Brewster Member as an exploration target, and as a reservoir in the Ichthys-Prelude and Burnside gas fields, attention to integration of sequence stratigraphic and lithostratigraphic frameworks for this interval is timely.

2021 ◽  
Author(s):  
Subrata Chakraborty ◽  
Monica Maria Mihai ◽  
Nacera Maache ◽  
Gabriela Salomia ◽  
Abdulla Al Blooshi ◽  
...  

Abstract In Abu Dhabi, the Mishrif Formation is developed in the eastern and western parts conformably above the Shilaif Formation and forms several commercial discoveries. The present study was carried out to understand the development of the Mishrif Formation over a large area in western onshore Abu Dhabi and to identify possible Mishrif sweet spots as future drilling locations. To achieve this objective, seismic mapping of various reflectors below, above, and within the Mishrif Formation was attempted. From drilled wells all the available wireline data and cores were studied. Detailed seismic sequence stratigraphic analysis was carried out to understand the evolution of the Mishrif Formation and places where the good porosity-permeability development and oil accumulation might have happened. The seismic characters of the Mishrif Formation in dry and successful wells were studied and were calibrated with well data. The Mishrif Formation was deposited during Late Cretaceous Cenomanian time. In the study area it has a gross thickness ranging from 532 to 1,269 ft as derived from the drilled wells; the thickness rapidly decreases eastward toward the shelf edge and approaching the Shilaif basin. The Mishrif was divided into three third-order sequences based on core observations from seven wells and log signatures from 25 wells. The bottom-most sequence Mishrif 1.0 was identified is the thickest unit but was also found dry. The next identified sequence Mishrif 2.0 was also dry. The next and the uppermost sequence identified as Mishrif 3.0 shows a thickness from 123 to 328 ft. All the tested oil-bearing intervals lie within this sequence. This sequence was further subdivided into three fourth-order sequences based on log and core signatures; namely, Mishrif 3.1, 3.2, and 3.3. In six selected seismic lines of 181 Line Km (LKM) cutting across the depositional axis, seismic sequence stratigraphic analysis was carried out. In those sections all the visible seismic reflectors were picked using a stratigraphic interpretation software. Reflector groups were made to identify lowstand systems tract, transgressive systems tract, maximum flooding surface, and highstand systems tract by tying with the observations of log and core at the wells and by seismic signature. Wheeler diagrams were generated in all these six sections to understand the lateral disposition of these events and locales of their development. Based on stratigraphic analysis, a zone with likely grainy porous facies development was identified in Mishrif 3.0. Paleotopography at the top of Mishrif was reconstructed to help delineate areas where sea-level fall generated leaching-related sweet spots. Analysis of measured permeability data identified the presence of local permeability baffles affecting the reservoir quality and hydrocarbon accumulation. This study helped to identify several drilling locations based on a generic understanding of the Mishrif Formation. Such stratigraphic techniques can be successfully applied in similar carbonate reservoirs to identify the prospect areas.


2016 ◽  
Vol 56 (1) ◽  
pp. 203
Author(s):  
James Shadlow ◽  
Adam Craig ◽  
David Christiansen

In short, yes. This case study illustrates that the application of a thorough geotechnical workflow incorporating many new and advanced techniques can assist in exploration business case decision making. Is an exploration drilling decision made lightly? A workflow incorporating 3D seismic processing, AVO inversion and stratigraphic framework studies involving high-resolution biostratigraphic and chemostratigraphic analyses was used to assess the prospectivity of an exploration permit near giant gas fields in the offshore Northern Carnarvon Basin. The primary reservoir is the prolific Triassic Mungaroo Formation fluvio-deltaic sediments, and secondary reservoirs include mid-Jurassic marine sands. 3D seismic reprocessing xcombined a newly acquired broadband seismic dataset into a multi-survey multi-azimuth PSDM volume that conditioned data for input to an AVO inversion. New petrophysics and rock physics analysis and modelling on regional well data were then calibrated with the AVO inversion to statistically derive lithology and fluid prediction volumes. These data were used in conjunction with reservoir paleo-stratigraphy studies to derive a subsurface model for reservoir distribution and hydrocarbon prediction. A two-stage risking process was applied to each prospect that objectively applied risk based on the seismic amplitudes. This enabled a more accurate risked-volume assessment, combined with the ability to assess a prospect portfolio covering different plays. The resultant interpretation identified issues with interpretations made on vintage data that would not have been easily identified without undertaking these studies. The integration of these assessments resulted in an unfavourable exploration drilling business case and a decision not to renew the permit.


2016 ◽  
Vol 847 ◽  
pp. 460-465
Author(s):  
Ben Sheng Huang ◽  
Yao Zhu

Casing wear is one of the key issues in the development of oil and gas fields and in the process of drilling operations. In this study, the relationship between hardness and wear resistance of drill collar and casing was studied; thereby the wear conditions between the two materials were improved. Chemical analysis, optical microscopy, hardness test and friction wear test were conducted to study the effects of heat treatment on hardness of the drill collar 4145H and the casing 30Mn5V, and discuss the relationship between hardness and wear resistance of them. The results showed that the materials of drill collar and casing after different heat treatment had varying degrees of wear, both of the respective wear amounts were gradually increasing with the increase of hardness of them, the wear extent of casing material was greater than that of drill collar material. The hardness of casing material was the lowest and its wear resistance was the best when quenching at 880°C and tempering at 630°C. And when quenching at 900°C and tempering at 690°C, the hardness of drill collar material was the lowest and its wear resistance was the best. Therefore, the hardness of drill collar and casing can be improved by changing the heat treatment process to improve the wear resistance, thereby reducing the wear conditions between them.


2005 ◽  
Vol 7 ◽  
pp. 21-24
Author(s):  
Poul Schiøler ◽  
Jan Andsbjerg ◽  
Ole R. Clausen ◽  
Gregers Dam ◽  
Karen Dybkjær ◽  
...  

Intense drilling activity following the discovery of the Siri Field in 1995 has resulted in an improved understanding of the siliciclastic Palaeogene succession in the Danish North Sea sector (Fig. 1). Many of the new wells were drilled in the search for oil reservoirs in sand bodies of Paleocene–Eocene age. The existing lithostratigraphy was based on data from a generation of wells that were drilled with deeper stratigraphic targets, with little or no interest in the overlying Palaeogene sediments, and thus did not adequately consider the significance of the Palaeogene sandstone units in the Danish sector. In order to improve the understanding of the distribution, morphology and age of the Palaeogene sediments, in particular the economically important sandstone bodies, a detailed study of this succession in the Danish North Sea has recently been undertaken. An important aim of the project was to update the lithostratigraphic framework on the basis of the new data.The project was carried out at the Geological Survey of Denmark and Greenland (GEUS) with participants from the University of Aarhus, DONG E&P and Statoil Norway, and was supported by the Danish Energy Agency. Most scientific results cannot be released until September 2006, but a revised lithostratigraphic scheme may be published prior to that date. Formal definition of new units and revision of the lithostratigraphy are in preparation. All of the widespread Palaeogene mudstone units in the North Sea have previously been formally established in Norwegian or British wells, and no reference sections exist in the Danish sector. As the lithology of a stratigraphic unit may vary slightly from one area to another, Danish reference wells have been identified during the present project, and the lithological descriptions of the formations have been expanded to include the appearance of the units in the Danish sector. Many of the sandstone bodies recently discovered in the Danish sector have a limited spatial distribution and were sourced from other areas than their contemporaneous counterparts in the Norwegian and British sectors. These sandstone bodies are therefore defined as new lithostratigraphic units in the Danish sector, and are assigned Danish type and reference sections. There is a high degree of lithological similarity between the Palaeogene–Neogene mudstone succession from Danish offshore boreholes and that from onshore exposures and boreholes, and some of the mudstone units indeed seem identical. However, in order to acknowledge the traditional distinction between offshore and onshore stratigraphic nomenclature, the two sets of nomenclature are kept separate herein. In recent years oil companies operating in the North Sea have developed various in-house lithostratigraphic charts for the Paleocene–Eocene sand and mudstone successions in the Danish and Norwegian sectors. A number of informal lithostratigraphic units have been adopted and widely used. In the present project, these units have been formally defined and described, maintaining their original names whenever feasible, with the aim of providing an unequivocal nomenclature for the Palaeogene – lower Neogene succession in the Danish sector. It has not been the intention to establish a sequence stratigraphic model for this succession in the North Sea; the reader is referred to the comprehensive works of Michelsen (1993), Neal et al. (1994), Mudge & Bujak (1994, 1996a, b), Michelsen et al. (1995, 1998), Danielsen et al. (1997) and Rasmussen (2004).


2003 ◽  
Author(s):  
D.T. Amri ◽  
M. Bédir ◽  
M. Soussi ◽  
M.H. Inoubli ◽  
K.B. Boubaker

2019 ◽  
Vol 59 (2) ◽  
pp. 940
Author(s):  
Mark Reilly ◽  
Suzanne Hurter ◽  
Zsolt Hamerli ◽  
Claudio L. de Andrade Vieira Filho ◽  
Andrew LaCroix ◽  
...  

The stratigraphy of the Surat Basin, Queensland, has historically been sub-divided by formation and unit nomenclature with a few attempts by other authors to apply sequence stratigraphy to existing formation boundaries. At a local- to field-scale, lithostratigraphy may be able to represent stratigraphy well, but at regional-scale, lithostratigraphic units are likely to be diachronous. To date, this lithology-driven framework does not accurately reflect time relationships in the sub-surface. An entirely new integrated methodological approach, involving well tied seismic data and sequence stratigraphic well-to-well correlations compared with published zircon age dates, has been applied to hundreds of deep wells and shallower coal seam gas wells. This method sub-divides the Surat Basin stratigraphy into defendable 2nd order to 3rd order sequence stratigraphic cycles and has required the use of an alpha-numeric sequence stratigraphic nomenclature to adequately and systematically label potential time equivalent surfaces basin-wide. Correlation of wells is the first step in building models of aquifers and coal seam gas fields for numerical simulation of fluid flow, which is necessary for responsible resource management. Lithostratigraphic correlations will overestimate the extent and hydraulic connectedness of the strata of interest. The result may be fluid flow models that do not represent a realistic pressure footprint of the flow. The present sequence stratigraphic method more accurately reflects the disconnectedness of sub-surface coals and sandstones (aquifers) on a field-to-field scale, adjacent field-scale, and basin-wide scale. It forms the basis for improved and more representative modelling of the sub-surface.


2000 ◽  
Vol 40 (1) ◽  
pp. 562
Author(s):  
W. Ringhofer ◽  
H. Sperl

From the early 1940s until the mid-1980s, hydrocarbon exploration within Austria was focussed upon Tertiary clastic reservoirs within the Vienna Basin. From 1980 to the early 1990s, an increasing number of exploration wells were drilled for carbonate reservoirs within deep thrust anticlines in the Alpine overthrust belt. These were typically high pressure-high temperature wells, and as a result, technically challenging and expensive.In the early 1990s, after little success within the Alpine overthrust belt, the focus of Austrian exploration was switched back to the 'maturely' explored Vienna Basin. During this period, the integration of historical well data, reprocessed 2D seismic and newly acquired 3D seismic data, evaluated within a sequence stratigraphic framework, has facilitated the accurate placement of multi-target wells. Together with the application of new drilling technology, the result has been a dramatic increase in new field discoveries. The reserves size of exploration and appraisal targets, in accordance with the maturity of the basin, have been relatively small, but, as a result of well-developed infrastructure and low drilling costs, highly profitable.The drive for increased drilling success and cost reduction and the application of 'new' technology has demanded an even closer integration of disciplines including exploration, reservoir engineering, drilling and production engineering. This integration in turn has necessitated process driven management. Multi- disciplinary teams, working with key contractors in an incentivised environment, achieved risk reduction, increased exploration success and budget reductions. As a result successful exploration has revived the mature Vienna Basin.


Sign in / Sign up

Export Citation Format

Share Document