THREE-DIMENSIONAL GEOLOGICAL MODELLING IN THE KINGFISH AND WEST KINGFISH OIL FIELDS: THE METHOD AND APPLICATIONS

1990 ◽  
Vol 30 (1) ◽  
pp. 342 ◽  
Author(s):  
W. J. Mudge ◽  
A. B. Thomson
Keyword(s):  
Cross Sections ◽  
Three Dimensional ◽  
Oil Fields ◽  
Communication Tool ◽  
Geological Modelling ◽  
Well Spacing ◽  
Stratigraphic Framework ◽  
Reservoir Description ◽  
Well Data ◽  
Geological Constraints

RESMAP is an Exxon proprietary program that makes possible the building of three-dimensional geological models. The models consist of millions of tabular cells contained within a stratigraphic framework. The models are generated by the integration of log analysis, seismic interpretation and the geologist's well picks and interpretation.RESMAP models are easy to access for generating structural and stratigraphic geological cross-sections. Maps such as structure, top of porosity and net sand percentage can be generated as well as subcrop and supercrop maps. Hydrocarbon-in-place estimates are also made from the model.The Kingfish and West Kingfish fields each possess a complex stratigraphic framework and exhibit rapid facies changes in the nearshore marine sediments. Techniques available in RESMAP enable the integration of the well data and seismic maps to produce an accurate stratigraphic framework containing the geometries of truncation onlap and downlap. The interpolation of porosity data from the wells successfully captures the facies distribution. This is due to the excellent well spacing in the vicinity of the facies changes and the ability to place geological constraints on the interpolation.The model provides a valuable communication tool for the mass of data present in a field. The model can also be updated quickly upon receipt of new data, providing a dynamic reservoir description on which to base future field management.

scholarly journals Characterizing and modeling the Upper Jurassic Arab-D reservoir using outcrop data from Central Saudi Arabia

GeoArabia ◽  
2014 ◽  
Vol 19 (2) ◽  
pp. 53-84
Author(s):  
Hassan Eltom ◽  
Osman Abdullatif ◽  
Mohammed Makkawi ◽  
Asaad Abdulraziq
Keyword(s):  
Saudi Arabia ◽  
Gamma Ray ◽  
Upper Jurassic ◽  
Major And Trace Elements ◽  
Carbonate Reservoir ◽  
Oil Fields ◽  
Small Scale ◽  
Well Spacing ◽  
Stratigraphic Framework

ABSTRACT Outcrop analogs are used to improve the characterization of reservoir stratigraphy, to understand subsurface facies architecture and heterogeneity, and to overcome the limitations associated with large inter-well spacing within individual oil fields. This study characterized and modeled outcropping strata equivalent to the Upper Jurassic Arab-D carbonate reservoir in Central Saudi Arabia. The study presents qualitative and quantitative sedimentological and petrographic descriptions of lithofacies associations and interprets them within a high-order stratigraphic framework using geostatistical modeling, spectral gamma-ray, geochemistry, petrography and micropaleontology. The sedimentological studies revealed three lithofacies associations, which are interpreted as a gentle slope platform depositional environment comprising nine high-frequency sequences. The biocomponents of the study area show a lower degree of diversity than the subsurface Arab-D reservoir; however, some key biofacies are present and provide indications of the nature of the paleoenvironments. The geochemical results show a strong correlation between the major and trace elements and the reservoir facies, and suggest that the concentrations of elements and their corresponding spectral gamma-ray logs follow the same general upward-shoaling pattern. The 3-D geocellular model captures small-scale reservoir variability, which is reflected in the petrophysical data distribution in the model. This investigation increases the understanding of the stratigraphy of the Arab-D reservoir and provides a general framework for zonation, layering, and lateral stratigraphic correlations.

Geological Field Sketches and Illustrations

2019 ◽  
Author(s):  
Matthew J. Genge
Keyword(s):  
Cross Sections ◽  
Earth Science ◽  
Three Dimensional ◽  
Worked Examples ◽  
Scientific Publications ◽  
Thin Sections ◽  
Geological Features ◽  
Different Types ◽  
The Subject

Drawings, illustrations, and field sketches play an important role in Earth Science since they are used to record field observations, develop interpretations, and communicate results in reports and scientific publications. Drawing geology in the field furthermore facilitates observation and maximizes the value of fieldwork. Every geologist, whether a student, academic, professional, or amateur enthusiast, will benefit from the ability to draw geological features accurately. This book describes how and what to draw in geology. Essential drawing techniques, together with practical advice in creating high quality diagrams, are described the opening chapters. How to draw different types of geology, including faults, folds, metamorphic rocks, sedimentary rocks, igneous rocks, and fossils, are the subjects of separate chapters, and include descriptions of what are the important features to draw and describe. Different types of sketch, such as drawings of three-dimensional outcrops, landscapes, thin-sections, and hand-specimens of rocks, crystals, and minerals, are discussed. The methods used to create technical diagrams such as geological maps and cross-sections are also covered. Finally, modern techniques in the acquisition and recording of field data, including photogrammetry and aerial surveys, and digital methods of illustration, are the subject of the final chapter of the book. Throughout, worked examples of field sketches and illustrations are provided as well as descriptions of the common mistakes to be avoided.

scholarly journals Thermo-Hydraulic Performance of U-Tube Borehole Heat Exchanger with Different Cross-Sections

2021 ◽  
Vol 13 (6) ◽  
pp. 3255
Author(s):  
Aizhao Zhou ◽  
Xianwen Huang ◽  
Wei Wang ◽  
Pengming Jiang ◽  
Xinwei Li
Keyword(s):  
Heat Transfer ◽  
Heat Exchange ◽  
Heat Resistance ◽  
Cross Sections ◽  
Three Dimensional ◽  
Thermal Response ◽  
Transfer Efficiency ◽  
Cross Sectional ◽  
Heat Transfer Efficiency ◽  
Oval Tube

For reducing the initial GSHP investment, the heat transfer efficiency of the borehole heat exchange (BHE) system can be enhanced to reduce the number or depth of drilling. This paper proposes a novel and simple BHE design by changing the cross-sectional shape of the U-tube to increase the heat transfer efficiency of BHEs. Specifically, in this study, we (1) verified the reliability of the three-dimensional numerical model based on the thermal response test (TRT) and (2) compared the inlet and outlet temperatures of the different U-tubes at 48 h under the premise of constant leg distance and fluid area. Referent to the circular tube, the increases in the heat exchange efficiencies of the curved oval tube, flat oval tube, semicircle tube, and sector tube were 13.0%, 19.1%, 9.4%, and 14.8%, respectively. (3) The heat flux heterogeneity of the tubes on the inlet and outlet sides of the BHE, in decreasing order, is flat oval, semicircle, curved oval, sector, and circle shapes. (4) The temperature heterogeneity of the borehole wall in the BHE in decreasing order is circle, sector, curved oval, flat oval, and semicircle shapes. (5) Under the premise of maximum leg distance, referent to the heat resistance of the tube with a circle shape at 48 h, the heat exchange efficiency of the curved oval, flat oval, semicircle, and sector tubes increased 12.6%, 17.7%, 10.3%, and 7.8%, respectively. (6) We found that the adjustments of the leg distance and the tube shape affect the heat resistance by about 25% and 12%, respectively. (7) The flat-oval-shaped tube at the maximum leg distance was found to be the best tube design for BHEs.

scholarly journals Computer-aided design of multi-purpose steel headframes for mines with a new technical level

2020 ◽  
Vol 174 ◽  
pp. 01048
Author(s):  
Elena Kassikhina ◽  
Vladimir Pershin ◽  
Nina Rusakova
Keyword(s):  
Cross Sections ◽  
Computer Aided Design ◽  
Information Technologies ◽  
Three Dimensional ◽  
Numerical Control ◽  
Technical Level ◽  
Resource Saving ◽  
Existing Structures ◽  
Set Up ◽  
Aided Design

The existing structures of the steel sinking headgear and permanent headframe do not meet the requirements of resource saving (metal consumption and manpower input at installation), and the present methods of the headframe designing do not fully reflect recent possibilities of applying of the advanced information technologies. Technical level of the modern software makes it possible for designers to set up multiple numerical experiments to create a computer simulation that allows solving the problem without field and laboratory experiments, and therefore without special costs. In this regard, a mathematical simulation has been developed and based on it, software to select cross-sections of multi- purpose steel headframe elements and to calculate proper weight of its metal structures depending on the characteristics and hoisting equipment. A headframe drawing is displayed, as the results of the software work, including list of elements, obtained optimal hoisting equipment in accordance with the initial data. The software allows speeding up graphic work and reducing manpower input on calculations and paper work. The software allows developing a three-dimensional image of the structure and its functional blocks, based on the obtained initial parameters, as well as developing control software for units with numerical control (NC) in order to manufacture multi-purpose headframes.

Analysing the Natural Resting Aspects of a Component for Automated Assembly

1995 ◽  
Vol 209 (2) ◽  
pp. 125-131 ◽  
Author(s):  
B K A Ngoi ◽  
L E N Lim ◽  
S S G Lee ◽  
S W Lye
Keyword(s):  
Cross Sections ◽  
Computer Aided Design ◽  
Energy Barrier ◽  
Three Dimensional ◽  
Rectangular Prism ◽  
Automatic Assembly ◽  
Automated Assembly ◽  
Barrier Method ◽  
Aided Design ◽  
Natural Resting Aspect

This paper proposes the construction of an energy envelope that can be used to advantage with the energy barrier method to analyse the natural resting aspect of engineering parts destined for automatic assembly. Unlike the energy barrier method, the energy envelope does not require any visualization of the projection of the energy barrier on the aspect of interest. The energy envelope is the three-dimensional topology of the changes in height of the centroid, as the part attempts changes of aspect. The paper describes how it may be computed in a CAD (computer aided design) solid modeller. The results of applying the energy envelope to prisms of square and cylindrical cross-sections are the same as those predicted by the energy barrier method. When extended to the analysis of a rectangular prism, the results were consistent with Boothroyd's dynamic solution and Boothroyd's experimental data. This conclusion is encouraging as there is no irrefutable evidence that the energy barrier method may be applied to the analysis of the rectangular prism.

Sign in / Sign up

Export Citation Format

Share Document