Variation in leaf characteristics among provenances of Eucalyptus camaldulensis Dehn. grown in Zambia

1971 ◽  
Vol 19 (2) ◽  
pp. 237
Author(s):  
J Burley ◽  
PJ Wood ◽  
AS Hans
Keyword(s):  
Principal Component Analysis ◽  
Leaf Shape ◽  
Natural Populations ◽  
Eucalyptus Camaldulensis ◽  
Principal Component ◽  
Morphological Characters ◽  
Leaf Length ◽  
Maximum Temperature ◽  
Ecotypic Variation ◽  
Old Trees

Eight morphological characters of leaves were examined in 2-year-old trees of 25 provenances of Eucalyptus camaldulensis Dehn, grown in a replicated trial in Zambia. Provenances differed significantly in leaf length and width, base angle, and oil gland density but significant effects were attributed to trees within provenances. Leaf curvature also varied between provenances, trees, and branches. The tip angle and the number of veins did not vary significantly. Leaf length and oil gland density were related to maximum temperature at seed source rather than to latitude but the reverse occurred for leaf width. Significant amounts of variation were explained by a linear combination of temperature and latitude but not by longitude, altitude, or rainfall. Information on seven traits was combined in principal component analysis in which the first component (a measure of leaf shape) accounted for 36% of total observed variation while the second (weighted largely on leaf length) accounted for 26%. Mapping of both univariate and multivariate results indicated that there are two major ecotypes and gave some evidence of clinal and ecotypic variation within them. The conclusions support those of other workers both in natural populations in Australia and in exotic populations elsewhere.

scholarly journals The variability of natural populations of Brachypodium pinnatum and B. sylvaticum based on morphological features

2011 ◽  
Vol 77 (3) ◽  
pp. 255-262 ◽  
Author(s):  
Beata Paszko
Keyword(s):  
Principal Component Analysis ◽  
Native Species ◽  
Natural Populations ◽  
Principal Component ◽  
Morphological Diversity ◽  
Morphological Characters ◽  
Morphometric Data ◽  
Single Population ◽  
Brachypodium Pinnatum ◽  
And Cluster Analysis

The morphological diversity in 25 populations of two native species of <em>Brachypodium</em> occurring in Poland, was studied. Principal component analysis and cluster analysis of morphometric data segregate specimens or populations of <em>Brachypodium</em> into two groups, corresponding to the two species. In most of morphological characters, <em>B. pinnatum</em> and <em>B. sylvaticum</em> are similar to each other. However, in terms of characteristics, such as the hairiness of culms and leaf-sheaths both can also vary much within a single population. In comparison with <em>B. pinnatum</em>, <em>B. sylvaticum</em> always has pubescent abaxial palea surfaces. Apparent differences were not detected between the two ecotypes of <em>B. pinnatum</em> named "Grassland" and "Woodland".

scholarly journals CHARACTERIZATION OF LEAF FEATURES IN SOME BLACKBERRY GENOTYPES COLLECTED FROM THE BLACK SEA REGION

2021 ◽  
Vol 10 (19) ◽  
pp. 375-380
Author(s):  
Fatma Alan ◽  
Aydin Uzun ◽  
Hasan Pinar
Keyword(s):  
Principal Component Analysis ◽  
Black Sea ◽  
International Association ◽  
Leaf Shape ◽  
Principal Component ◽  
Component Analysis ◽  
Morphological Characterization ◽  
Leaf Length ◽  
The Black Sea ◽  
Black Sea Region

In this study, morphological characterization studies regarding to leaf characteristics (leaf length, leaf width, leaf cross section shape, leaf edge waviness, swelling between leaf veins, leaf tooth depth, dominant leaflet number, leaf shape, green color intensity on the upper part of the leaf and brightness on the upper part of the leaf) were carried out in some blackberry genotypes collected from the Black Sea Region of Turkey, according to the definition lists of UPOV (International Association for the Protection of New Plant Varieties). The measurements and observations made were transformed into feature scores, and using these scores, dendrogram and principal component analysis (PCA) related to morphological features were obtained. In the dendrogram obtained according to the morphological characterization data, the similarity level between the materials was determined between 0.50-1.00 and the average similarity coefficient was found as 0.75. The dendrogram consists of 2 main clusters (A and B). According to the dendrogram, genotypes obtained from Samsun (Çarşamba 1), Samsun (Çarşamba 2) and Ordu (Gülyalı), Bartın (Center) and Rize (Küçükçayır) regions were found to be the closest genotypes with 1.00 similarity level. In addition, as a result of the principal component analysis (PCA), the similarities and differences within the blackberry genotypes were clearly revealed. It was determined that they consisted of three main groups and two outer groups in their distribution on the two-dimensional plot.As a result of the study, it was determined that there is a certain level of variation between blackberry genotypes. The data obtained from this study will help to protect the diversity and to evaluate it with different studies.

scholarly journals Selection of Eucalyptus camaldulensis Families for Sustainable Pulpwood Production by Means of Anatomical Characteristics

Forests ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 31
Author(s):  
Ikumi Nezu ◽  
Futoshi Ishiguri ◽  
Haruna Aiso ◽  
Sapit Diloksumpun ◽  
Jyunichi Ohshima ◽  
...  
Keyword(s):  
Principal Component Analysis ◽  
Fibre Diameter ◽  
Eucalyptus Camaldulensis ◽  
Principal Component ◽  
Wood Properties ◽  
Component Analysis ◽  
Pulp And Paper ◽  
Anatomical Characteristics ◽  
Diameter Fibre ◽  
Sib Families

Sustainable pulpwood production from fast-growing tree plantations is needed for pulp and paper industries. To increase the pulpwood production efficiency, the anatomical characteristics and derived-wood properties of 75 trees from 15 half-sib families of Eucalyptus camaldulensis Dehnh. planted in Thailand were investigated, and then the family was classified by suitability of wood as raw material for pulp and paper products using principal component analysis and clustering. The mean values of vessel diameter, vessel frequency, fibre diameter, fibre lumen diameter, and fibre wall thickness at 2 cm from the cambium were 128 µm, 16 no./mm2, 11.1 µm, 7.1 µm, and 1.88 µm, respectively. In addition, the Runkel ratio, Luce’s shape factor, flexibility coefficient, slenderness ratio, solids factor, and wall coverage ratio (i.e., derived-wood properties) were 0.53, 0.42, 0.64, 85.3, 68 × 103 µm3, and 0.34, respectively. Significant differences in fibre diameter, fibre lumen diameter, and Runkel ratio were found among families. Although significant differences among families were not found for other anatomical characteristics and derived-wood properties, the p-values obtained by an analysis of variance test ranged from 0.050 to 0.088. Based on the results of a principal component analysis and cluster analysis, 15 families were classified into four clusters with different expected pulp and paper characteristics. The suitability of wood from E. camaldulensis half-sib families for pulp and paper can be evaluated by principal component analysis using anatomical characteristics and physical properties as variables. Based on the results, desirable pulp and paper quality may be obtained through the selection of families from this species.

Implications of phenotypic plasticity for numerical taxonomy of Ornithogalum montanum (Liliaceae)

1991 ◽  
Vol 69 (1) ◽  
pp. 34-38 ◽  
Author(s):  
M. Pigliucci ◽  
M. G. Politi ◽  
D. Bellincampi
Keyword(s):  
Principal Component Analysis ◽  
Phenotypic Plasticity ◽  
Numerical Taxonomy ◽  
Natural Populations ◽  
Principal Component ◽  
Reaction Norm ◽  
Component Analysis ◽  
Morphological Response ◽  
Numerical Taxonomic Study ◽  
High Degree

Implications of phenotypic plasticity in a subspecific numerical taxonomic study of Ornithogalum montanum Cyr. (Liliaceae) are discussed. Clones belonging to six natural populations were grown in a glasshouse, and their morphological response to three water dosages was analyzed by means of principal component analysis. PC-1 ranks the three groups of replicated populations, suggesting a high degree of phenotypic plasticity; on the other hand, PC-3 is almost environmentally independent. Proximities in the phenetic space are shown to be at least partially environmentally dependent, suggesting a reaction norm for the character correlation matrix. The results do not corroborate a previous recognition of six subspecies of O. montanum. Key words: phenotypic plasticity, numerical taxonomy, Ornithogalum, reaction norm, principal component analysis.

scholarly journals A phenetic study of the genus Rasahus Amyot & Serville (Heteroptera, Reduviidae)

1990 ◽  
Vol 1 (3) ◽  
pp. 131-144
Author(s):  
María Coscarón
Keyword(s):  
Principal Component Analysis ◽  
Cluster Analysis ◽  
Principal Component ◽  
Component Analysis ◽  
Morphological Characters ◽  
Basal Plate ◽  
Using Data ◽  
Diagnostic Importance

Cluster analysis by four methods and a principal component analysis were performed using data on 24 morphological characters of 27 species of the genus Rasahus (Peiratinae). The results obtained by the different techniques show general agreement. They confirm the present number of taxa and reveal the existence within the genus of three groups of species: scutellaris , hamatus and vittatus. The scutellaris group is constituted by R. aeneus (Walker), R. maculipennis (Lepelletier and Serville), R. bifurcatas Champion, R. castaneus Coscarón, R. guttatipennis (Stål), R. flavovittarus Stål, R. costarricensis Coscarón, R. scutellaris (Fabricius), R. atratus Coscarón, R. peruensis Coscarón, R. paraguayensis Coscarón, R. surinamensis Coscarón, R. albomaculatus Mayr, R. brasiliensis Coscarón and R. sulcicollis (Serville).The hamatus group contains R. rufiventris (Walker), R. hamatus (Fabricius), R. amapaensis Coscarón, R. arcitenens Stål, R. limai Pinto, R. angulatus coscarón, R. thoracicus Stål, R. biguttatus (Say), R. arcuiger (Stål), R. argentinensis Coscarón and R. grandis Fallou. The vittatus group contains R. vittatus Coscarón. The characters used to separate the groups of species are: shape of the pygophore, shape of the parameres, basal plate complexity, shape of the postocular region and hemelytra pattern. Illustrations of the structures of major diagnostic importance are included.

scholarly journals Antlers Characterization for Identification of Deer Species (Family Cervidae) in Indonesia

2019 ◽  
Vol 4 (3) ◽  
pp. 97
Author(s):  
Donan Satria Yudha ◽  
M Zulfiqar Meizar Pratama ◽  
Rury Eprilurahman
Keyword(s):  
Principal Component Analysis ◽  
Principal Component ◽  
Morphological Characters ◽  
Main Beam ◽  
Size Measurement ◽  
Economic Values ◽  
Deer Species ◽  
Unique Character ◽  
Long Time ◽  
Shape And Size

There are five species of deer (family Cervidae) living in Indonesia today. Male deer possesses antlers, a unique character of male deer. Antlers have economic values for quite a long time. Antler’s growth is influenced by several factors, therefore each species of deer have its own unique antlers’ shape and size. Antler’s identification usually relies on size measurement and overall shape of complete antlers which still attach to the skull. It is difficult to identify shed, broken or individual antler. The purpose of the research is to understand antlers’ morphological characters on each species to become diagnostic characters. Specimens analysed were collections of LIPI and were analysed with Principal Component Analysis (PCA) using PAST3 software. The results showed each species of deer having their own unique antlers’ character, and so it can be used to determine the species of Indonesian deer. The important structures for identification are relief, pedicle, brow, bez, and main beam.

scholarly journals Use of Highly Discriminating Morphological Characters and Isozymes in the Study of Spanish Chestnut Cultivars

2006 ◽  
Vol 131 (6) ◽  
pp. 770-779 ◽  
Author(s):  
Santiago Pereira-Lorenzo ◽  
María Belén Díaz-Hernández ◽  
Ana María Ramos-Cabrer
Keyword(s):  
Principal Component Analysis ◽  
Cluster Analysis ◽  
Multivariate Analysis ◽  
Castanea Sativa ◽  
Principal Component ◽  
Market Value ◽  
Morphological Characters ◽  
Minor Importance ◽  
Breeding Programs ◽  
And Cluster Analysis

Morphological characters (six traits) and isozymes (four systems, five loci) were used to discriminate between Spanish chestnut cultivars (Castanea sativa Mill.) from the Iberian Peninsula. A total of 701 accessions (representing 168 local cultivars) were analyzed from collections made between 1989 and 2003 in the main chestnut growing areas: 31 were from Andalucía (12 cultivars), 293 from Asturias (65 cultivars), 25 from Castilla-León (nine cultivars), four from Extremadura (two cultivars) and 348 from Galicia (80 cultivars). Data were synthesized using multivariate analysis, principal component analysis, and cluster analysis. A total of 152 Spanish cultivars were verified: 58 cultivars of major importance and 94 of minor importance, of which 18 had high intracultivar variation. Thirty-seven cultivars were clustered into 14 synonymous groups. Six of these were from Galicia, one from Castilla-León (El Bierzo), four from Asturias, one from Asturias and Castilla-León (El Bierzo), and two from Asturias, Castilla-León (El Bierzo), and Galicia. The chestnut cultivars from Galicia and Asturias were undifferentiated in genetic terms, indicating that they are not genetically isolated. Overall, chestnut cultivars from southern Spain showed the least variation. Many (58%) of Spanish cultivars produced more than 100 nuts/kg; removing this low market-value character will be a high priority. The data obtained will be of use in chestnut breeding programs in Spain and elsewhere.

Morphological variation in the genus Juliomys (Rodentia: Cricetidae: Sigmodontinae) and taxonomic status of Juliomys anoblepas (Winge 1887) from the Quaternary of Southeast Brazil

Zootaxa ◽  
2020 ◽  
Vol 4861 (3) ◽  
pp. 429-443
Author(s):  
CAROLINA PIRES ◽  
MARCELO WEKSLER ◽  
CIBELE R. BONVICINO
Keyword(s):  
Principal Component Analysis ◽  
Morphological Variation ◽  
Morphological Analysis ◽  
Principal Component ◽  
Taxonomic Status ◽  
Morphological Characters ◽  
The Other ◽  
Anterior Portion ◽  
Living Species ◽  
Qualitative Characters

The region of Lagoa Santa, Minas Gerais, Brazil, is one of the most important karstic areas of the Brazilian Quaternary due to the faunistic diversity of living and extinct forms. Among them, some taxa remain poorly studied, as is the case of Calomys anoblepas Winge 1887. Despite the recent allocation of the taxon within Juliomys, its description and morphological analysis are condensed, based on comparative few specimens and on few informative characters. In this study, we investigate characters proposed to distinguish species of Juliomys, and reevaluate the taxonomic status of the fossil Juliomys anoblepas. We analyzed 80 cranio-dental morphological characters in 233 specimens represented by the four species currently recognized: J. pictipes (Osgood 1933), J. rimofrons Oliveira & Bonvicino 2002, J. ossitenuis Costa, Pavan, Leite & Fagundes 2007, and J. ximenezi Christoff, Vieira, Oliveira, Gonçalves, Valiati & Tomasi 2016. We also performed principal component analysis on eight craniodental measurements available for the J. anoblepas hypodigm. The review of morphological systems and the evaluation of the characters used in the literature revealed that there are no diagnostic characters in the anterior portion of the skull and in the molar series of Juliomys, being difficult to differentiate the fossil from the other living species. Only six qualitative characters were variable and applicable to the hypodigm of J. anoblepas. Characters are polymorphic, invariable, or the fossil is not sufficiently complete to determinate its states. The taxon could not be morphometrically differentiated from J. pictipes and J. ossitenuis. Based on the results presented herein, we consider J. anoblepas as a nomen dubium and restrict its name to the taxon’s hypodigm. 

scholarly journals Morphological variability of acorns and its taxonomic significance in Quercus. from Turkey

2015 ◽  
Vol 43 (3) ◽  
pp. 293-299 ◽  
Author(s):  
Y Bakis ◽  
MT Babaç
Keyword(s):  
Principal Component Analysis ◽  
Morphological Variability ◽  
Morphological Characteristics ◽  
Principal Component ◽  
Component Analysis ◽  
Morphological Characters ◽  
Taxonomic Significance ◽  
Morphological Variations ◽  
Quercus Species ◽  
Different Populations

Morphological variations of acorn among and within the groups of Quercus species were studied. A total of 617 acorns belonging to 14 species representing all 3 sections of Quercus L. (Fagaceae) in Turkey were examined in this study. Specimens were collected from 47 different populations over both Anatolian and Thrace part of Turkey. Principal component analysis was used to analyze the morphological characteristics of acorns. Results obtained from this study demonstrate the use of morphological characters in differentiating the taxa of Quercus and Cerris sections studied. Another important finding is the introgression among the acorns of species within Quercus section DOI: http://dx.doi.org/10.3329/bjb.v43i3.21601 Bangladesh J. Bot. 43(3): 293-299, 2014 (December)

scholarly journals Spatial and temporal variability of precipitation and drought in Portugal

2012 ◽  
Vol 12 (5) ◽  
pp. 1493-1501 ◽  
Author(s):  
D. S. Martins ◽  
T. Raziei ◽  
A. A. Paulo ◽  
L. S. Pereira
Keyword(s):  
Principal Component Analysis ◽  
Standardized Precipitation Index ◽  
Principal Component ◽  
Component Analysis ◽  
Maximum Temperature ◽  
Drought Indices ◽  
Drought Severity ◽  
Spatial And Temporal Variability ◽  
Monthly Precipitation ◽  
Precipitation Regimes

Abstract. The spatial variability of precipitation and drought are investigated for Portugal using monthly precipitation from 74 stations and minimum and maximum temperature from 27 stations, covering the common period of 1941–2006. Seasonal precipitation and the corresponding percentages in the year, as well as the precipitation concentration index (PCI), was computed for all 74 stations and then used as an input matrix for an R-mode principal component analysis to identify the precipitation patterns. The standardized precipitation index at 3 and 12 month time scales were computed for all stations, whereas the Palmer Drought Severity Index (PDSI) and the modified PDSI for Mediterranean conditions (MedPDSI) were computed for the stations with temperature data. The spatial patterns of drought over Portugal were identified by applying the S-mode principal component analysis coupled with varimax rotation to the drought indices matrices. The result revealed two distinct sub-regions in the country relative to both precipitation regimes and drought variability. The analysis of time variability of the PC scores of all drought indices allowed verifying that there is no linear trend indicating drought aggravation or decrease. In addition, the analysis shows that results for SPI-3, SPI-12, PDSI and MedPDSI are coherent among them.

Sign in / Sign up

Export Citation Format

Share Document