scholarly journals Colloidal transport and flocculation are the cause of the hyperenrichment of gold in nature

2021 ◽  
Vol 118 (20) ◽  
pp. e2100689118
Author(s):  
Duncan F. McLeish ◽  
Anthony E. Williams-Jones ◽  
Olga V. Vasyukova ◽  
James R. Clark ◽  
Warwick S. Board

Aqueous complexation has long been considered the only viable means of transporting gold to depositional sites in hydrothermal ore-forming systems. A major weakness of this hypothesis is that it cannot readily explain the formation of ultrahigh-grade gold veins. This is a consequence of the relatively low gold concentrations typical of ore fluids (tens of parts per billion [ppb]) and the fact that these “bonanza” veins can contain weight-percent levels of gold in some epithermal and orogenic deposits. Here, we present direct evidence for a hypothesis that could explain these veins, namely, the transport of the gold as colloidal particles and their flocculation in nanoscale calcite veinlets. These gold-bearing nanoveinlets bear a remarkable resemblance to centimeter-scale ore veins in many hydrothermal gold deposits and give unique insight into the scale invariability of colloidal flocculation in forming hyperenriched gold deposits. Using this evidence, we propose a model for the development of bonanza gold veins in high-grade deposits. We argue that gold transport in these systems is largely mechanical and is the result of exceptionally high degrees of supersaturation that preclude precipitation of gold crystals and instead lead to the formation of colloidal particles, which flocculate and form much larger masses. These flocculated masses aggregate locally, where they are seismically pumped into fractures to locally form veins composed largely of gold. This model explains how bonanza veins may form from fluids containing ppb concentrations of gold and does not require prior encapsulation of colloidal gold particles in silica gel, as proposed by previous studies.

Author(s):  
Arifudin Idrus ◽  
Sukamandaru Prihatmoko ◽  
Ernowo Harjanto ◽  
Franz Michael Meyer ◽  
Irzal Nur ◽  
...  

In Indonesia, gold is commonly mined from epithermal-, porphyry-, and skarn-type deposits that are commonly found in volcanic belts along island arcs or active continental margin settings. Numerous gold prospects, however, were recently discovered in association with metamorphic rocks. This paper focuses on metamorphic rock-hosted gold mineralization in Eastern Indonesia, in particular the Bombana (SE Sulawesi) and Buru Island (Maluku) prospects. At Bombana, gold-bearing quartz-veins are hosted by the Pompangeo metamorphic complex. Sheared, segmented veins vary in thickness from 2 cm to 2 m. Gold is mainly present in the form of ‘free gold’ among silicate minerals and closely related to cinnabar, stibnite, tripuhyite, and in places, minor arsenopyrite. The gold distribution is erratic, however, ranging from below detection limit up to 134 g/t. At least three generations of veins are identified. The first is parallel to the foliation, the second crosscuts the first generation of veins as well as the foliation, and the late-stage laminated deformed quartz-calcite vein represents the third mineralization stage. The early veins are mostly massive to crystalline, occasionally brecciated, and sigmoidal, whereas the second-stage veins are narrower than the first ones and less subjected to brecciation. Gold grades in the second- and third-stage veins are on average higher than that in the earlier veins. Microthermometric and Raman spectrometric studies of fluid inclusions indicate abundant H2O-NaCl and minor H2O-NaCl-CO2 fluids. Homogenization temperatures and salinities vary from 114 to 283 ºC and 0.35 to 9.08 wt.% NaCl eq., respectively. Crush-leach analysis of fluid inclusions suggests that the halogen fluid chemistry is not identical to sea water, magmatic or epithermal related fluids, but tends to be similar to fluids in mesothermal-type gold deposits. In Buru Island (Gunung Botak and Gogorea prospects), two distinct generations of quartz veins are identified. Early quartz veins are segmented, sigmoidal discontinuous and parallel to the foliation of the host rock. This generation of quartz veins is characterized by crystalline relatively clear quartz, and weakly mineralized with low sulfide and gold contents. The second type of quartz veins occurs within the ‘mineralized zone’ of about 100 m in width and ~1,000 m in length. Gold mineralization is intensely overprinted by argillic alteration. The mineralization-alteration zone is probably parallel to the mica schist foliation and strongly controlled by N-S or NE-SW-trending structures. Gold-bearing quartz veins are characterized by banded texture particularly following host rock foliation and sulphide banding, brecciated and rare bladed-like texture. Alteration types consist of propylitic (chlorite, calcite, sericite), argillic and carbonation represented by graphite banding and carbon flakes. Ore mineral comprises pyrite, native gold, pyrrhotite, and arsenopyrite. Cinnabar and stibnite are present in association with gold. Ore chemistry indicates that 11 out of 15 samples yielded more than 1 g/t Au, in which 6 of them graded in excess of 3 g/t Au. All high-grade samples are composed of limonite or partly contain limonitic material. This suggests the process of supergene enrichment. Interestingly, most of the high-grade samples contain also high concentrations of As (up to 991ppm), Sb (up to 885ppm), and Hg (up to 75ppm). Fluid inclusions in both quartz vein types consist of 4 phases including L-rich, V-rich, L-V-rich and L1-L2-V (CO2)-rich phases. The mineralizing hydrothermal fluid typically is CO2-rich, of moderate temperature (300-400 ºC), and low salinity (0.36 to 0.54 wt.% NaCl eq). Based on those key features, gold mineralization in Bombana and Buru Island tends to meet the characteristics of orogenic, mesothermal types of gold deposit. Metamorphic rock-hosted gold deposits could represent the new targets for gold exploration particularly in Eastern Indonesia.


Minerals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 381
Author(s):  
Zinaida Nikiforova

Based on the identified typomorphic features of placer gold, a set of determined morphogenetic criteria is proposed to identify the genesis of placer gold content and different sources in the platform areas, which allow more correctly selecting search methods and improving the efficiency of forecasting ore and placer gold deposits.Goldparticles larger than 0.25 mm with signs of wind-worn processing indicate the formation of autochthonous aeolian placers.Gold particles with signs of wind-worn processing with a size of 0.1–0.25 mm, forming an extensive halo of dispersion, indicate the formation of allochthonous placers in Quaternary deposits.Deflationary (autochthonous) placers of native gold can be found by the halo of its distribution of toroidal and sphericalhollow forms, which, of course, are the search morphogenetic criterion of aeolian placers.The presence of disc-shaped and lamellar gold particles with ridgelike edges in alluvial placers is typical for placers of heterogeneous origin, formed due to deflation of proluvialplacers.The discovery of pseudo-ore gold in alluvial placers indicates the arrival of gold from intermediate gold-bearing sources of different ages and not from primary sources, which is a morphogenetic criterion for determining different sources of the placer.In modern gold placers, the presence of gold of a pseudo-ore appearance can serve as a search criterion for the discovery of gold-bearing conglomerates with high gold content. The developed method for diagnosing the genotype of placer gold by its morphological characteristics (alluvial, aeolian, pseudo-ore) can be successfully used by industrial geological organizations to search and explore ore and placer gold deposits.


2007 ◽  
Vol 43 (3) ◽  
pp. 363-371 ◽  
Author(s):  
Peter Neumayr ◽  
John Walshe ◽  
Steffen Hagemann ◽  
Klaus Petersen ◽  
Anthony Roache ◽  
...  

2021 ◽  
Vol 48 (1) ◽  
pp. 1
Author(s):  
José Cabello

A review of gold and gold bearing base metals deposits in Chile, indicate the existence of at least six different type of ore deposits, most largely formed during the Cenozoic with predominance in the Miocene. Mesozoic deposits are common but less relevant regarding their size and gold content. These hydrothermal ore deposits are genetically associated with subduction related Andean arc magmatism. Due to its relationship with episodic magmatism migrating eastward, there is a tendency for the deposits to be in distinct, north-south trending, belts with a progressive west to east decrease in mineralization age. After analysing 82 cases in total, main gold concentration can be assigned to high-sulfidation epithermal and porphyry type deposits. Low-sulfidation epithermal, IOCG and mesothermal type appears as less relevant. Gold bearing copper deposits constitute an important part of Chile’s total gold production. Both IOCG type but especially porphyry copper deposits are and will remain as a substantial source to supplement the future output of the gold in the country. The 82 deposits with their tonnage and grade studied, represent a total gold content of 11,662 t equivalent to 375 Moz, excluding past production for those exploited. A number of probable gold bearing base metals high tonnage deposits (IOCG and porphyry copper) do not include their gold content in public format, hence the number delivered could be estimated conservative. Methodical geochronological, ore types and zonation studies are required to better appreciate this metallogenic setting widening current understanding and future exploration results.


2008 ◽  
Vol 72 (4) ◽  
pp. 953-970 ◽  
Author(s):  
T. Oberthür ◽  
T. W. Weiser

AbstractGold mineralization at the Viceroy Mine is hosted in extensional veins in steep shear zones that transect metabasalts of the Archaean Arcturus Formation. The gold mineralization is generally made up of banded or massive quartz carrying abundant coarse arsenopyrite. However, most striking is a distinct suite of Au-Bi-Te-S minerals, namely joseite-A (Bi4TeS2), joseite-B (Bi4Te2S), hedleyite (Bi7Te3), ikunolite (Bi4S3), ‘protojoseite’ (Bi3TeS), an unnamed mineral (Bi6Te2S), bismuthinite (Bi2S3), native Bi, native gold, maldonite (Au2Bi), and jonassonite (AuBi5S4). The majority of the Bi-Te-S phases is characterized by Bi/(Se+Te) ratios of >1. Accordingly, this assemblage formed at reduced conditions at relatively low fS2 and fTe2. Fluid-inclusion thermometry indicates depositional temperatures of the main stage of mineralization of up to 342°C, in the normal range of mesothermal, orogenic gold deposits worldwide. However, melting temperatures of Au-Bi-Te phases down to at least 235°C (assemblage (Au2Bi + Bi + Bi7Te3)) imply that the Au-Bi-Te phases have been present as liquids or melt droplets. Furthermore, the close association of native gold, native bismuth and other Bi-Te-S phases suggests that gold was scavenged from the hydrothermal fluids by Bi-Te-S liquids or melts. It is concluded that a liquid/melt-collecting mechanism was probably active at Viceroy Mine, where the distinct Au-Bi-Te-S assemblage either formed late as part of the main, arsenopyrite-dominated mineralization, or it represents a different mineralization event, related to rejuvenation of the shear system. In either case, some of the gold may have been extracted from pre-existing, gold-bearing arsenopyrite by Bi-Te-S melts, thus leading to an upgrade of the gold ores at Viceroy. The Au-Bi-Te-S assemblage represents an epithermal-style mineralization overprinted on an otherwise mesothermal (orogenic) gold mineralization.


Nanoscale ◽  
2021 ◽  
Author(s):  
James B Stahley ◽  
Mehdi B Zanjani

DNA-mediated assembly of colloidal particles can be utilized to produce a variety of structures which may have desirable phononic, photonic, or electronic transport properties. Recent developments in linker-mediated assembly processes...


2021 ◽  
Vol 25 (1) ◽  
pp. 49-53
Author(s):  
I.V. Zen’kov ◽  
E.V. Loginova ◽  
G.A. Karacheva ◽  
G.I. Latyshenko ◽  
P.M. Kondrashov ◽  
...  

The paper presents the results of a study of the ecological state of rock dumps and repositories of processed gold-bearing ore in the course of open-pit mining of gold deposits in the Chelyabinsk region. According to remote sensing data and analytical calculations, it was established that the rate of reclamation of disturbed lands lags behind the rate of their withdrawal for the needs of gold mining enterprises. In parallel with this, low levels of vegetation cover restoration coefficients were revealed on waste dumps.


CrystEngComm ◽  
2019 ◽  
Vol 21 (33) ◽  
pp. 4961-4968 ◽  
Author(s):  
Andrei V. Churakov ◽  
Dmitry A. Grishanov ◽  
Alexander G. Medvedev ◽  
Alexey A. Mikhaylov ◽  
Tatiana A. Tripol'skaya ◽  
...  

The crystal structures of cyclic dipeptide peroxosolvates provide valuable insight into the non-redox interaction of hydrogen peroxide with the peptide backbone.


1989 ◽  
Vol 20 (2) ◽  
pp. 113
Author(s):  
L.G.B.T. Polomé

Most of the gold deposits in the Barberton Greenstone belt of South Africa are relatively small and in structurally complex geological areas.The mise-a-la-masse electrical technique, where a current electrode is earthed in a mineralised zone, was used on one of our exploration projects consisting of a sulphides/gold-bearing carbonaceous banded iron formation within a succession of mafic, ultramafic and sedimentary rocks. The technique was successful in delineating individual mineralised units within a broad lithological sequence. During the survey, electrical potential measurements were recorded on surface, in underground drives and in twenty five boreholes. Measurements were also repeated by earthing the mineralised zone in a number of boreholes. Major discontinuities were recognised within the ore zones and used to interpret geological structures. These were then used to define specific units for ore reserve calculations and the application of selected mining techniques.


2020 ◽  
Vol 115 (2) ◽  
pp. 241-277 ◽  
Author(s):  
Evan C.G. Hastie ◽  
Daniel J. Kontak ◽  
Bruno Lafrance

Abstract Recognizing if and how Au is remobilized, in solid, melt, or fluid state, is critical for understanding the origin of high-grade ore zones in Au deposits. When evidence for Au remobilization can be demonstrated, then primary versus secondary processes can be distinguished, resulting in a more complete understanding of Au deposit formation. To address this, samples from two Au deposits, Jerome and Kenty, in the Archean Swayze greenstone belt of northern Ontario, Canada, together with archived samples from 39 high-grade Au deposits from the Abitibi greenstone belt across Ontario and Quebec, were geochemically characterized using integrated scanning electron microscopy-energy dispersive spectroscopy and electron microprobe imaging and analyses in addition to laser ablation-inductively coupled plasma-mass spectrometry elemental mapping. These data provided the basis to develop a model for Au remobilization and upgrading of Au that is widely applicable to orogenic gold settings. Data for the Jerome deposit indicate that Au uptake into early pyrite was not due to pulsing of different fluids, but instead was predominantly controlled by S availability, whereby the oscillatory/sector zoning in pyrite resulted from the substitution of As into S sites during rapid growth due to local chemical disequilibrium. In addition, Au-bearing pyrite from both the Jerome and Kenty deposits records textures, such as porosity development coincident with the presence of native gold and accessory sulfide phases, that are strongly suggestive of coupled dissolution-reprecipitation (CDR) reactions that liberated Au and associated elements from earlier auriferous (100–5,000 ppm Au) pyrite. During the remobilization process, Au and Ag were decoupled, which resulted in (1) a change in Au/Ag ratios of 0.5 to 5 in early pyrite to ≈9 in the new native gold (900 Au fineness) and (2) incorporation of Ag into cogenetic secondary mineral phases (e.g., chalcopyrite, tetrahedrite, and galena). Evidence for an association of low-melting point chalcophile elements (LMCE; Hg, Te, Sb, and Bi) with Au at the Jerome, Kenty, and many (>50%) of the 39 historic deposits sampled, along with native gold filling structurally favorable sites in vein quartz in all samples, indicates a fluid might not have been the only factor contributing to remobilization. This systematic Au-LMCE association strongly supports a model whereby Au is released by CDR reactions and is then remobilized by fluid-mediated, LMCE-rich melts that began to form at 335°C and/or by local, nanoparticle (nanomelt?) transport during deformation and metamorphism. Conclusions drawn from this study have implications for Au deposits globally and can account for the common presence of coarse-grained, commonly crystalline, native gold filling fractures in quartz and the paragenetically late-stage origin of gold in veins. They can also better explain the inability of Au in solution remobilization models to account for locally high gold grades, given the relatively low solubility of Au in hydrothermal fluids.


Sign in / Sign up

Export Citation Format

Share Document