Mathematical Modelling of the Primary and Secondary Drying Stages of Bulk Solution Freeze-Drying in Trays: Parameter Estimation and Model Discrimination by Comparison of Theoretical Results With Experimental Data

1997 ◽  
Vol 15 (3-4) ◽  
pp. 791-810 ◽  
Author(s):  
H. Sadikoglu ◽  
A. I. Liapis
1998 ◽  
Vol 16 (3-5) ◽  
pp. 399-431 ◽  
Author(s):  
H. Sadikoglu ◽  
A. I. Liapis ◽  
O. K. Crosser

1990 ◽  
Vol 112 (4) ◽  
pp. 590-595 ◽  
Author(s):  
J. H. Steward

In this paper, the requirements for an accurate 3D model of the tooth contact-line load distribution in real spur gears are summarized. The theoretical results (obtained by F.E.M.) for the point load compliance of wide-faced spur gear teeth are set out. These values compare well with experimental data obtained from tests on a large spur gear (18 mm module, 18 teeth).


2018 ◽  
Vol 140 (8) ◽  
Author(s):  
Eduard Amromin

According to several known experiments, an increase of the incoming flow air content can increase the hydrofoil lift coefficient. The presented theoretical study shows that such increase is associated with the decrease of the fluid density at the cavity surface. This decrease is caused by entrainment of air bubbles to the cavity from the surrounding flow. The theoretical results based on such explanation are in a good agreement with the earlier published experimental data for NACA0015.


2013 ◽  
Vol 2013 ◽  
pp. 1-4
Author(s):  
A. Gonzalez-Cisneros ◽  
F. L. Castillo-Alvarado ◽  
J. Ortiz-Lopez ◽  
G. Contreras-Puente

In CdS/CdTe solar cells, chemical interdiffusion at the interface gives rise to the formation of an interlayer of the ternary compoundCdSxCdTe1-x. In this work, we evaluate the effects of this interlayer in CdS/CdTe photovoltaic cells in order to improve theoretical results describing experimentalC-V(capacitance versus voltage) characteristics. We extended our previous theoretical methodology developed on the basis of three cardinal equations (Castillo-Alvarado et al., 2010). The present results provide a better fit to experimental data obtained from CdS/CdTe solar cells grown in our laboratory by the chemical bath deposition (for CdS film) and the close-spaced vapor transport (for CdTe film) techniques.


2014 ◽  
Vol 8 (1) ◽  
pp. 44-48
Author(s):  
Grzegorz Mieczkowski ◽  
Krzysztof Molski

Abstract The increasing application of composite materials in the construction of machines causes strong need for modelling and evaluating their strength. There are many well known hypotheses used for homogeneous materials subjected to monotone and cyclic loading conditions, which have been verified experimentally by various authors. These hypotheses should be verified also for composite materials. This paper provides experimental and theoretical results of such verifications for bimaterial structures with interfacial cracks. Three well known fracture hypotheses of: Griffith, McClintock and Novozhilov were chosen. The theoretical critical load values arising from each hypotheses were compared with the experimental data including uni and multi-axial loading conditions. All tests were carried out with using specially prepared specimens of steel and PMMA.


2018 ◽  
Vol 12 (2) ◽  
pp. 171
Author(s):  
Enobong E. Joshua ◽  
Cec Ekemini T. Akpan

This paper investigates the global asymptotic stability of a Delayed Extended Rosenzweig-MacArthur Model via Lyapunov-Krasovskii functionals. Frequency sweeping technique ensures stability switches as the delay parameter increases and passes the critical bifurcating threshold.The model exhibits a local Hopf-bifurcation from asymptotically stable oscillatory behaviors to unstable strange chaotic behaviors dependent of the delay parameter values.Hyper-chaotic fluctuations were observed for large delay values far away from the critical delay margin. Numerical simulations of experimental data obtained via non-dimensionalization have shown the applications of theoretical results in ecological population dynamics.


2011 ◽  
Vol 1 (32) ◽  
pp. 15
Author(s):  
Yang-Yih Chen ◽  
Meng-Syue Li ◽  
Hung-Chu Hsu ◽  
Ying-Pin Lin

In this paper, a new third-order Lagrangian asymptotic solution describing nonlinear water wave propagation on the surface of a uniform sloping bottom is presented. The model is formulated in the Lagrangian variables and we use a two-parameter perturbation method to develop a new mathematical derivation. The particle trajectories, wave pressure and Lagrangian velocity potential are obtained as a function of the nonlinear wave steepness  and the bottom slope  perturbed to third order. The analytical solution in Lagrangian form satisfies state of the normal pressure at the free surface. The condition of the conservation of mass flux is examined in detail for the first time. The two important properties in Lagrangian coordinates, Lagrangian wave frequency and Lagrangian mean level, are included in the third-order solution. The solution can also be used to estimate the mean return current for waves progressing over the sloping bottom. The Lagrangian solution untangle the description of the features of wave shoaling in the direction of wave propagation from deep to shallow water, as well as the process of successive deformation of a wave profile and water particle trajectories leading to wave breaking. The proposed model has proved to be capable of a better description of non-linear wave effects than the corresponding approximation of the same order derived by using the Eulerian description. The proposed solution has also been used to determine the wave shoaling process, and the comparisons between the experimental and theoretical results are presented in Fig.1a~1b. In addition, the basic wave-breaking criterion, namely the kinematical Stokes stability condition, has been investigated. The comparisons between the present theory, empirical formula of Goda (2004) and the experiments made by Iwagali et al.(1974), Deo et al.(2003) and Tsai et al.(2005) for the breaking index(Hb/L0) versus the relative water depth(d0/L0) under two different bottom slopes are depicted in Figs 2a~2b. It is found that the theoretical breaking index is well agreement with the experimental results for three bottom slopes. However,for steep slope of 1/3 shown in Fig 2b, the result of Goda‘s empirical formula gives a larger value in comparison with the experimental data and the present theory. Some of empirical formulas presented the breaking wave height in terms of deepwater wave condition, such as in Sunamura (1983) and in Rattanapitikon and Shibayama(2000). Base on the results depicted in Fig. 3a~3b, it showed that the theoretical results are in good agreement with the experimental data (Iwagali et al. 1974, Deo et al.2003 and Tsai et al. 2005) than the empirical formulas. The empirical formula of Sunamura (1983) always predicts an overestimation value.


2007 ◽  
Vol 12 (3) ◽  
pp. 399-408 ◽  
Author(s):  
A. Oleinick ◽  
C. Amatore ◽  
O. Klymenko ◽  
I. Svir

In this work we report the results of the mathematical modelling of NO◦ -release by neurons considering a series of Gaussian bursts, together with its transport in the brain by diffusion. Our analysis relies on the NO◦ -release from a neuron monitored before, during and after its patch-clamp stimulation as detected by an ultramicroelectrode introduced into a slice of living rat’s brain. The parameters of the neuron activity function have been obtained by numerical fitting of experimental data with simulated theoretical results. Within our initial hypothesis about the Gaussian decomposition of NO◦ -release that allowed drawing qualitative and quantitative conclusions about the considered neuron activity function. It is noted that since the activity function can be readily modified this signal processing may be adapted to the treatment of other and maybe more physiologically relevant hypotheses.


Sign in / Sign up

Export Citation Format

Share Document