On Tilting Pad Carbon-Graphite Porous Journal Bearings: Measurements of Imbalance Response and Comparison to Predictions of Bearing Performance and System Dynamic Response

2021 ◽  
pp. 1-17
Author(s):  
Luis San Andrés ◽  
Jing Yang ◽  
Andrew Devitt
Keyword(s):  
Dynamic Response ◽  
Journal Bearings ◽  
System Dynamic ◽  
Tilting Pad

Journal Vibration: Influence of Compliant Bearing Design

2012 ◽  
Author(s):  
Matthew Cha ◽  
Sergei Glavatskih
Keyword(s):  
Dynamic Response ◽  
Nonlinear Dynamic ◽  
Dynamic Behaviour ◽  
Journal Bearings ◽  
Design Parameters ◽  
Radial Clearance ◽  
White Metal ◽  
Tilting Pad ◽  
Bearing Design ◽  
Tilting Pad Journal Bearings

In this paper, the nonlinear dynamic behaviour of vertical and horizontal rotors in compliant tilting pad journal bearings has been investigated. White metal and compliant bearings with line pivot pads are compared. The dynamic response of four pad bearings with different preload factors is studied. The effect of viscoelasticity is also considered in comparison with purely elastic compliant and white metal liners. The influence of radial clearance and pad offset is analysed. It is shown how pad design parameters such as preload factor, pivot offset, viscoelasticity of the liner, and radial clearance can be selected to control the size of the journal orbit in compliant bearings.

Optimum Design of Journal Bearings Dimensions for Rotating Machines

2020 ◽  
Vol 38 (10A) ◽  
pp. 1481-1488
Author(s):  
Tariq M. Hammza ◽  
Ehab N. Abas ◽  
Nassear R. Hmoad
Keyword(s):  
Aspect Ratio ◽  
Dynamic Response ◽  
Numerical Solution ◽  
Critical Speed ◽  
Design Method ◽  
Considerable Effect ◽  
Journal Bearings ◽  
Rotating Machines ◽  
Bearing Clearance ◽  
Study Results

The values of Many parameters which involve in the design of fluid film journal bearings mainly depend on the bearing applied load when using the conventional design method to design the journal bearings, in this study, as well as applied bearing load, the dynamic response and critical speed have been used to calculate the dimensions of journal bearings. In the field of rotating machine, especially a heavy-duty rotating machines, the critical speed and response are the main parameters that specify bearing dimensions. The bearing aspect ratio (bearing length to bore diameter) and bearing clearance have been determined based on rotor maximum critical speed and minimum response displacement. The analytical solution of rotor Eq. of motion was verified by numerical solution via using ANSYS Mechanical APDL 18.0 and by comparing the numerical solution with the preceding study. The final study results clearly showed that the bearing aspect ratio has little effect on the critical speed, but it has a high effect on the dynamic response also the bearing clearance has little effect on the critical speed and considerable effect on the dynamic response. The study showed that the more accurate values of bearing aspect ratio to make the response of rotor as low as possible are about 0.65 - 1 and bearing percent clearance is about 0.15 - 0.2 for different rotor dimensions.

A new dynamic mesh algorithm for studying the 3D transient flow field of tilting pad journal bearings

2016 ◽  
Vol 230 (12) ◽  
pp. 1470-1482 ◽  
Author(s):  
Mengxuan Li ◽  
Chaohua Gu ◽  
Xiaohong Pan ◽  
Shuiying Zheng ◽  
Qiang Li
Keyword(s):  
Flow Field ◽  
Equilibrium Position ◽  
Transient Flow ◽  
Journal Bearings ◽  
Dynamic Mesh ◽  
Static Equilibrium ◽  
Time Step ◽  
Tilting Pad ◽  
Grid Nodes ◽  
Tilting Pad Journal Bearings

A new dynamic mesh algorithm is developed in this paper to realize the three-dimensional (3D) computational fluid dynamics (CFD) method for studying the small clearance transient flow field of tilting pad journal bearings (TPJBs). It is based on a structured grid, ensuring that the total number and the topology relationship of the grid nodes remain unchanged during the dynamic mesh updating process. The displacements of the grid nodes can be precisely recalculated at every time step. The updated mesh maintains high quality and is suitable for transient calculation of large journal displacement in FLUENT. The calculation results, such as the static equilibrium position and the dynamic characteristic coefficients, are consistent with the two-dimensional (2D) solution of the Reynolds equation. Furthermore, in the process of transient analysis, under conditions in which the journal is away from the static equilibrium position, evident differences appear between linearized and transient oil film forces, indicating that the nonlinear transient calculation is more suitable for studying the rotor-bearing system.

scholarly journals Characterization of High-Power Turbomachinery Tilting Pad Journal Bearings: First Results Obtained on a Novel Test Bench

Lubricants ◽  
2018 ◽  
Vol 6 (1) ◽  
pp. 4 ◽  
Author(s):  
Enrico Ciulli ◽  
Paola Forte ◽  
Mirko Libraschi ◽  
Lorenzo Naldi ◽  
Matteo Nuti
Keyword(s):  
High Power ◽  
Test Bench ◽  
Journal Bearings ◽  
Tilting Pad ◽  
First Results ◽  
Tilting Pad Journal Bearings

Numerical and experimental study on the dynamic bearing properties of a four-pad and eight-pad tilting pad journal bearings in a vertical rotor

2021 ◽  
pp. 1-24
Author(s):  
Gudeta Berhanu Benti ◽  
David Jose Rondon ◽  
Rolf Gustavsson ◽  
Jan-Olov Aidanpää
Keyword(s):  
Dynamic Properties ◽  
Mean Value ◽  
Journal Bearings ◽  
Navier Stokes ◽  
Rigid Rotor ◽  
Navier Stokes Equation ◽  
Vertical Rotor ◽  
Tilting Pad ◽  
Fifth Order ◽  
Tilting Pad Journal Bearings

Abstract In this paper, the dynamics of tilting pad journal bearings with four and eight pads are studied and compared experimentally and numerically. The experiments are performed on a rigid vertical rotor supported by two identical bearings. Two sets of experiments are carried out under similar test setup. One set is performed on a rigid rotor with two four-pad bearings, while the other is on a rigid rotor with two eight-pad bearings. The dynamic properties of the two bearing types are compared with each other by studying the unbalance response of the system at different rotor speeds. Numerically, the test rig is modeled as a rigid rotor and the bearing coefficients are calculated based on Navier-Stokes equation. A nonlinear bearing model is developed and used in the steady state response simulation. The measured and simulated displacement and force orbits show similar patterns for both bearing types. Compared to the measurement, the simulated mean value and range (peak-to-peak amplitude) of the bearing force deviate with a maximum of 16 % and 38 %, respectively. It is concluded that, unlike the eight-pad TPJB, the four-pad TPJB excite the system at the third and fifth-order frequencies, which are due to the number of pads, and the amplitudes of these frequencies increase with the rotor speed.

Transient Thermoelastohydrodynamic Study of Tilting-Pad Journal Bearings Under Dynamic Loading

1998 ◽  
Vol 120 (2) ◽  
pp. 405-409 ◽  
Author(s):  
P. Monmousseau ◽  
M. Fillon ◽  
J. Freˆne
Keyword(s):  
Steady State ◽  
Dynamic Loading ◽  
Dynamic Load ◽  
Journal Bearings ◽  
Operating Conditions ◽  
Maximum Temperature ◽  
Tilting Pad ◽  
Transient Period ◽  
Final Steady State ◽  
Tilting Pad Journal Bearings

Nowadays, tilting-pad journal bearings are submitted to more and more severe operating conditions. The aim of this work is to study the thermal and mechanical behavior of the bearing during the transient period from an initial steady state to a final steady state (periodic). In order to study the behavior of this kind of bearing under dynamic loading (Fdyn) due to a blade loss, a nonlinear analysis, including local thermal effects, realistic boundary conditions, and bearing solid deformations (TEHD analysis) is realized. After a comparison between theoretical results obtained with four models (ISO, ADI, THD, and TEHD) and experimental data under steady-state operating conditions (static load Ws), the evolution of the main characteristics for three different cases of the dynamic load (Fdyn/Ws < 1, Fdyn/Ws = 1 and Fdyn//Ws > 1) is discussed. The influence of the transient period on the minimum film thickness, the maximum pressure, the maximum temperature, and the shaft orbit is presented. The final steady state is obtained a long time after the appearance of a dynamic load.

Sign in / Sign up

Export Citation Format

Share Document