Integrating GIS, Circular Statistics and KDSD for Modelling Spatial Data: A Case Study

2002 ◽  
Vol 6 (1) ◽  
pp. 5-25
Author(s):  
Andrés Molina Aguilar
Keyword(s):  
Spatial Data ◽  
Circular Statistics

Application of PCA with georeferenced data in the tourism industry: A case study in the province of Córdoba, Argentina

2021 ◽  
pp. 135481662098768
Author(s):  
Laura I Luna
Keyword(s):  
Decision Making ◽  
Principal Components ◽  
Spatial Data ◽  
Local Development ◽  
Value Added ◽  
Tourism Industry ◽  
Methodological Innovation ◽  
Spatial Principal Components ◽  
Components Analysis

The spatial analysis of tourism industries provides information about their structure, which is necessary for decision-making. In this work, tourism industries in the departments of Córdoba province, Argentina, for the 2001–2014 period were mapped. Multivariate methods with and without spatial restrictions (spatial principal components (sPCs) analysis, MULTISPATI-PCA, and principal components analysis (PCA), respectively) were applied and their performance was compared. MULTISPATI-PCA yielded a higher degree of spatial structuring of the components that summarize tourism activities than PCA. The methodological innovation lies in the generation of statistics for multidimensional spatial data. The departments were classified according to the participation of tourism activities in the value added of tourism using the sPCs obtained as input of the cluster fuzzy k-means analysis. This information provides elements necessary for appropriately defining local development strategies and, therefore, is useful to improve decision-making.

scholarly journals Constructing Damage Indices Based on Publicly Available Spatial Data: Exemplified by Earthquakes and Volcanic Eruptions in Indonesia

2021 ◽  
Author(s):  
Emmanuel Skoufias ◽  
Eric Strobl ◽  
Thomas Tveit
Keyword(s):  
Spatial Data ◽  
Volcanic Ash ◽  
Satellite Images ◽  
Fragility Curves ◽  
Volcanic Eruptions ◽  
Damage Indices ◽  
Damage Indicator ◽  
Time Period ◽  
Peak Ground Motion

AbstractThis article demonstrates the construction of earthquake and volcano damage indices using publicly available remote sensing sources and data on the physical characteristics of events. For earthquakes we use peak ground motion maps in conjunction with building type fragility curves to construct a local damage indicator. For volcanoes we employ volcanic ash data as a proxy for local damages. Both indices are then spatially aggregated by taking local economic exposure into account by assessing nightlight intensity derived from satellite images. We demonstrate the use of these indices with a case study of Indonesia, a country frequently exposed to earthquakes and volcanic eruptions. The results show that the indices capture the areas with the highest damage, and we provide overviews of the modeled aggregated damage for all provinces and districts in Indonesia for the time period 2004 to 2014. The indices were constructed using a combination of software programs—ArcGIS/Python, Matlab, and Stata. We also outline what potential freeware alternatives exist. Finally, for each index we highlight the assumptions and limitations that a potential practitioner needs to be aware of.

A Framework of Local Geospatial Data Infrastructure for Sustainable Urban Development

2014 ◽  
Vol 71 (4) ◽  
Author(s):  
Azman Ariffin ◽  
Nabila Ibrahim ◽  
Ghazali Desa ◽  
Uznir Ujang ◽  
Hishamuddin Mohd Ali ◽  
...  
Keyword(s):  
Urban Development ◽  
Spatial Data ◽  
Geospatial Data ◽  
Sustainable Urban Development ◽  
Data Infrastructure ◽  
Shape Category ◽  
Key Dimensions ◽  
Data Layers ◽  
Conceptual Data

This paper addresses the need to develop a Local Geospatial Data Infrastructure (LGDI) for sustainable urban development. This research will highlight the effective and efficient framework for the development of local infrastructure. This paper presents a framework (a combination of domain based and goal based frameworks) for developing a Local Geospatial Data Infrastructure. The basis of this research is on a case study conducted in a Malaysian city. The main focus of the case study was on measuring and assessing sustainability. Six conceptual frameworks were produced based on 6 key dimensions of sustainability. The developed framework consists of 6 conceptual data models and 6 conceptual data structures. It was concluded that 30 spatial data layers are needed of which 12 data layers are categorized as point shape, 17 data layers are categorized as polygon shape and 1 data layer as line shape category.

scholarly journals Exploring Geostatistical Modeling and VisualizationTechniques of Uncertainties for Categorical Spatial Data

2021 ◽  
Vol 12 (4) ◽  
Author(s):  
Carlos A. Felgueiras ◽  
Jussara O. Ortiz ◽  
Eduardo C. G. Camargo ◽  
Laércio M. Namikawa ◽  
Thales S. Körting
Keyword(s):  
Spatial Data ◽  
Three Dimensional ◽  
Real Data ◽  
Geographic Region ◽  
Geostatistical Modeling ◽  
Probability Maps ◽  
Uncertainty Model ◽  
Probability Criterion ◽  
Sample Points

This article presents and analyzes the indicator geostatistical modeling and some visualization techniques of uncertainty models for categorical spatial attributes. A set of sample points of some categorical attribute is used as input information. The indicator approach requires a transformation of sample points on fields of indicator samples according to the classes of interest. Experimental and theoretical semivariograms of the indicator fields are defined representing the spatial variation of the indicator information. The indicator fields, along with their semivariograms, are used to determine the uncertainty model, the conditioned probability distribution function, of the attribute at any location inside the geographic region delimited by the samples. The probability functions are considered for producing prediction and probability maps based on the maximum class probability criterion. These maps can be visualized using different techniques. In this work, it is considered individual visualization of the predicted and probability maps and a combination of them. The predicted maps can also be visualized with or without constraints related to the uncertainty probabilities. The combined visualizations are based on three-dimensional (3D) planar projection and on the Red-Green-Blue to Intensity-Hue-Saturation (RGB-IHS) fusion transformation techniques. The methodology of this article is illustrated by a case study with real data, a sample set of soil textures observed in an experimental farm located in the region of São Carlos city in São Paulo State, Brazil. The resulting maps of this case study are presented and the advantages and the drawbacks of the visualization options are analyzed and discussed.

scholarly journals Integrating cellular automata and discrete global grid systems: a case study into wildfire modelling

2020 ◽  
Vol 1 ◽  
pp. 1-23
Author(s):  
Majid Hojati ◽  
Colin Robertson
Keyword(s):  
Big Data ◽  
Spatial Analysis ◽  
Cellular Automata ◽  
Spatial Data ◽  
Data Model ◽  
Data Access ◽  
Environmental Modeling ◽  
Modeling Framework ◽  
Global Grid

Abstract. With new forms of digital spatial data driving new applications for monitoring and understanding environmental change, there are growing demands on traditional GIS tools for spatial data storage, management and processing. Discrete Global Grid System (DGGS) are methods to tessellate globe into multiresolution grids, which represent a global spatial fabric capable of storing heterogeneous spatial data, and improved performance in data access, retrieval, and analysis. While DGGS-based GIS may hold potential for next-generation big data GIS platforms, few of studies have tried to implement them as a framework for operational spatial analysis. Cellular Automata (CA) is a classic dynamic modeling framework which has been used with traditional raster data model for various environmental modeling such as wildfire modeling, urban expansion modeling and so on. The main objectives of this paper are to (i) investigate the possibility of using DGGS for running dynamic spatial analysis, (ii) evaluate CA as a generic data model for dynamic phenomena modeling within a DGGS data model and (iii) evaluate an in-database approach for CA modelling. To do so, a case study into wildfire spread modelling is developed. Results demonstrate that using a DGGS data model not only provides the ability to integrate different data sources, but also provides a framework to do spatial analysis without using geometry-based analysis. This results in a simplified architecture and common spatial fabric to support development of a wide array of spatial algorithms. While considerable work remains to be done, CA modelling within a DGGS-based GIS is a robust and flexible modelling framework for big-data GIS analysis in an environmental monitoring context.

Assessing Spatial Equity: An Evaluation of Measures of Accessibility to Public Playgrounds

1998 ◽  
Vol 30 (4) ◽  
pp. 595-613 ◽  
Author(s):  
E Talen ◽  
L Anselin
Keyword(s):  
Spatial Data ◽  
Empirical Studies ◽  
Spatial Association ◽  
Spatial Data Analysis ◽  
Socioeconomic Indicators ◽  
Model Average ◽  
Urban Service ◽  
Spatial Equity ◽  
Analytical Perspective

Geographical and political research on urban service delivery—who benefits and why—has proliferated during the past two decades. Overall, this literature is not characterized by a particular attention to the importance of method in drawing conclusions about spatial equity based on empirical studies. Specifically, there has been scant interest in the effect of geographic methodology on assessing the relationship between access and socioeconomic characteristics that are spatially defined. In this paper we take a spatial analytical perspective to evaluate the importance of methodology in assessing whether or not, or to what degree the distribution of urban public services is equitable. We approach this issue by means of an empirical case study of the spatial distribution of playgrounds in Tulsa, Oklahoma, relative to that of the targeted constituencies (children) and other socioeconomic indicators. In addition to the ‘traditional’ measure (count of facilities in an areal unit), we consider a potential measure (based on the gravity model), average travel distance, and distance to the nearest playground as indicators of accessibility. We find significant differences between the spatial patterns in these measures that are suggested by local indicators of spatial association and other techniques of exploratory spatial data analysis. The choice of access measure not only implies a particular treatment of spatial externalities but also affects conclusions about the existence of spatial mismatch and inequity.

Identifying Potential Zones of Crime Commitment against Tourists in a Park: Conceptual and Logical Spatial Data Modeling

2014 ◽  
Vol 3 (9) ◽  
pp. 114-123
Author(s):  
Mozhdeh Shahbazi
Keyword(s):  
Spatial Data ◽  
Data Modeling ◽  
Research Topic ◽  
Point Of View ◽  
Complex Nature ◽  
Crime Mapping ◽  
Spatial Point ◽  
Suitability Maps ◽  
Gis Software

Location is considered as an important element in studying tourism security. Therefore, mapping crime hotspots has recently been an interesting research topic in tourism development. In order to identify crime patterns and hotspots, it is essential to create a database containing the required spatial data. It should also be integrated with additional qualitative/quantitative attributes affecting criminal actions. Designing a geographic information system (GIS) can be considered as the most efficient way to deal with this problem considering the complex nature of tourism security. This paper presents the theoretical scheme of spatial data modeling with the purpose of indentifying potential crime zones within a developed park. From the spatial point of view, the factors and the constraints, which make a location vulnerable, are defined. The entities are identified by their attributes and characterized by their relationships. Finally, the conceptual and the logical models to create the crime suitability maps are generated. The models provided in this paper are designed in an explicit way; therefore, they can be easily modified or generalized for any specific case study. The presented data modeling procedure can be applied to generate essential databases for crime mapping via any GIS software.

Emotional and Subjective Volunteered Geographical Information

2017 ◽  
pp. 97-112 ◽  
Author(s):  
Jiri Panek
Keyword(s):  
Data Mining ◽  
Social Networks ◽  
Spatial Data ◽  
Large Scale ◽  
Geographical Information ◽  
Emotional Information ◽  
Spatial Features ◽  
Spatial Locations ◽  
The City

Crowdsroucing of emotional information can take many forms, from social networks data mining to large-scale surveys. The author presents the case-study of emotional mapping in Ostrava´s district Ostrava-Poruba, Czech Republic. Together with the local administration, the author crowdsourced the emotional perceptions of the location from almost 400 citizens, who created 4,051 spatial features. Additional to the spatial data there were 1,244 comments and suggestions for improvements in the district. Furthermore, the author is looking for patterns and hot-spots within the city and if there are any relevant linkages between certain emotions and spatial locations within the city.

New Solutions and Methodologies for Data Acquisition and Management in Small Municipalities

2021 ◽  
pp. 103-123
Author(s):  
Rui Pedro Juliao ◽  
Amilton Amorim ◽  
João Paulo Hespanha ◽  
Guilherme Henrique Barros de Souza ◽  
Ronaldo Celso Messias Correia ◽  
...  
Keyword(s):  
Data Acquisition ◽  
Unmanned Aerial Vehicles ◽  
Spatial Data ◽  
Domain Model ◽  
Territorial Development ◽  
Paulo State ◽  
Land Administration ◽  
Aerial Vehicles ◽  
Data Infrastructures

Promoting and managing sustainable territorial development require adequate tools that enable territorial managers to formulate appropriate choices. Technological solutions have emerged, and the paradigm has shifted from isolated GIS to a more collaborative production and dissemination of geographic data using spatial data infrastructures (SDI). A critical dataset for municipal land administration is cadastre. ISO 19152 standard of the Land Administration Domain Model (LADM) was published in 2012. Also, technology evolution, namely unmanned aerial vehicles (UAV), has changed data acquisition for cadastre. These are three pillars of modern territorial management: openness, co-production, and data sharing (SDI); models (LADM); affordable technology (UAV). This chapter presents how municipalities can develop an SDI project, incorporating LADM guidelines and UAV data acquisition. The case study is based on a group of 32 small municipalities from São Paulo state, in Brazil, known as UNIPONTAL.

Sign in / Sign up

Export Citation Format

Share Document