Nanofibrillated Cellulose Extracted by Enzymatic Hydrolysis Followed by Mechanical Fibrillation

TEMPO nanofibrillated cellulose (TNFC) from two underutilized Appalachian hardwoods, Northern red oak (Quercus rubra) and yellow poplar (Liriodendron tulipifera), was prepared to determine its feasibility to be used as template for antimicrobial metallic copper particles. In addition, a comparison of the TNFC from the two species in terms of their morphological, chemical, thermal, and mechanical properties was also performed. The woody biomass was provided in the form of logging residue from Preston County, West Virginia. A traditional kraft process was used to produce the pulp followed by a five-stage bleaching. Bleached pulps were then subjected to a TEMPO oxidation process using the TEMPO/NaBr/NaClO system to facilitate the final mechanical fibrillation process and surface incorporation of metallic copper. The final TNFC diameters for red oak and yellow poplar presented similar dimensions, 3.8±0.74 nm and 3.6±0.85 nm, respectively. The TNFC films fabricated from both species exhibited no statistical differences in both Young’s modulus and the final strength properties. Likely, after the TEMPO oxidation process both species exhibited similar carboxyl group content, of approximately 0.8 mmol/g, and both species demonstrated excellent capability to incorporate antimicrobial copper on their surfaces.

Download Full-text

Cellulosic Fiber: Mechanical Fibrillation-Morphology-Rheology Relationships

10.21203/rs.3.rs-469007/v1 ◽

2021 ◽

Author(s):

Tianzhong Yuan ◽

Jinsong Zeng ◽

Bin Wang ◽

Zheng Cheng ◽

Kefu Chen

Keyword(s):

Aspect Ratio ◽

Yield Stress ◽

Network Structure ◽

Nanofibrillated Cellulose ◽

Fiber Suspension ◽

Elastic Behavior ◽

Fiber Network ◽

Cellulosic Fiber ◽

Mechanical Fibrillation ◽

The Relationship

Abstract This study aims to investigate the relationship between mechanical fibrillation, morphological properties, and rheological behavior of cellulosic fiber. Three types of cellulosic fibers were obtained by adjusting mechanical fibrillation, namely squashed cellulose, incompletely nanofibrillated cellulose, and completely nanofibrillated cellulose, respectively. The squashed cellulose with large size and small aspect ratio had low entanglement capacity, thus forming a weak fiber network. The corresponding suspension exhibited low viscosity, weak elastic behavior, small yield stress, and low dynamic stability. An obviously increasing aspect ratio and entanglement capacity were observed with increasing mechanical fibrillation, resulting in entangled fiber network structure. Hence, the cellulosic fiber suspension obtained by more mechanical fibrillation exhibited higher viscosity, stronger gel-like behavior, and bigger yield stress. Moreover, the extremely entangled fiber network structure has better anti-deformation capacity and recovery capacity. We revealed the fundamental insights into the relationship between morphologies and rheological properties of cellulosic fiber, paving the way for designing cellulose-based materials.

Download Full-text

Metabolic Studies of Vitamin K1-14C and Menadione-14C in the Normal and Hepatectomized Rats

Thrombosis and Haemostasis ◽

10.1055/s-0038-1651216 ◽

1968 ◽

Vol 19 (03/04) ◽

pp. 383-388 ◽

Cited By ~ 6

Author(s):

R Losito ◽

C. A Owen ◽

E. V Flock ◽

Keyword(s):

Enzymatic Hydrolysis ◽

Oral Anticoagulants ◽

Urinary Metabolites ◽

The Other ◽

Vitamin K1 ◽

Vitamin K3 ◽

Metabolic Studies ◽

Intact Rats

SummaryThe metabolism of vitamin K1- 14C and menadione-14C (vitamin K3-14C) was studied in normal and hepateetomized rats. After the administration of menadione, about 70% of the 14C was excreted in the urine in 24 hrs in both types of rats. Two urinary metabolites were identified by enzymatic hydrolysis: one a glucuronide and the other a sulfate of reduced menadione. Thus, the liver is not necessary for the metabolism of menadione. In the vitamin K1 studies, the intact rats excreted only 10% of the 14C and the hepatectomized rats excreted less than 0.5%. The retention of vitamin K1 may explain its superiority over menadione as an antidote for overdosages of oral anticoagulants.

Download Full-text

Surface energy of cellulosic materials: The effect of particle morphology, particle size, and hydroxyl number

TAPPI Journal ◽

10.32964/tj14.9.565 ◽

2015 ◽

Vol 14 (9) ◽

pp. 565-576 ◽

Cited By ~ 1

Author(s):

YUCHENG PENG ◽

DOUGLAS J. GARDNER

Keyword(s):

Particle Size ◽

Surface Energy ◽

Particle Morphology ◽

Nanofibrillated Cellulose ◽

Particle Sizes ◽

Hydroxyl Number ◽

Small Individual ◽

Dispersion Component ◽

Commercial Applications ◽

Lower Temperature

Understanding the surface properties of cellulose materials is important for proper commercial applications. The effect of particle size, particle morphology, and hydroxyl number on the surface energy of three microcrystalline cellulose (MCC) preparations and one nanofibrillated cellulose (NFC) preparation were investigated using inverse gas chromatography at column temperatures ranging from 30ºC to 60ºC. The mean particle sizes for the three MCC samples and the NFC sample were 120.1, 62.3, 13.9, and 9.3 μm. The corresponding dispersion components of surface energy at 30°C were 55.7 ± 0.1, 59.7 ± 1.3, 71.7 ± 1.0, and 57.4 ± 0.3 mJ/m2. MCC samples are agglomerates of small individual cellulose particles. The different particle sizes and morphologies of the three MCC samples resulted in various hydroxyl numbers, which in turn affected their dispersion component of surface energy. Cellulose samples exhibiting a higher hydroxyl number have a higher dispersion component of surface energy. The dispersion component of surface energy of all the cellulose samples decreased linearly with increasing temperature. MCC samples with larger agglomerates had a lower temperature coefficient of dispersion component of surface energy.

Download Full-text

From biorefineries to bioproducts: conversion of pretreated pulp from biorefining streams to lignocellulose nanofibers

TAPPI Journal ◽

10.32964/tj18.4.233 ◽

2019 ◽

Vol 18 (4) ◽

pp. 233-241

Author(s):

CHENGGUI SUN ◽

RICHARD CHANDRA ◽

YAMAN BOLUK

Keyword(s):

Energy Consumption ◽

Enzymatic Hydrolysis ◽

Rheological Behavior ◽

Material Basis ◽

Softwood Pulp ◽

Energy Consumptions ◽

Hardwood Pulp ◽

The Stability ◽

Lignocellulose Nanofibers

This study investigates the use of pretreatment and enzymatic hydrolysis side streams and conversion to lignocellulose nanofibers. We used a steam-exploded and partial enzymatic hydrolyzed hardwood pulp and an organosolv pretreated softwood pulp to prepare lignocellulose nanofibers (LCNF) via microfluidization. The energies applied on fibrillation were estimated to examine the energy consumption levels of LCNF production. The energy consumptions of the fibrillation processes of the hardwood LCNF production and the softwood LCNF production were about 7040-14080 kWh/ton and 4640 kWh/ton on a dry material basis, respectively. The morphology and dimension of developed hardwood and softwood LCNFs and the stability and rheological behavior of their suspensions were investigated and are discussed.

Download Full-text