scholarly journals Dielectric Breakdown Strength and Energy Storage Density of CCTO-ZBS Electroceramic

2020 ◽  
Vol 596 ◽  
pp. 012006
Author(s):  
Muhammad Qusyairie Saari ◽  
Julie Juliewatty Mohamed ◽  
Muhammad Azwadi Sulaiman ◽  
Mohd Fariz Abd Rahman ◽  
Zainal Arifin Ahmad ◽  
...  
Keyword(s):  
Energy Storage ◽  
Dielectric Breakdown ◽  
Breakdown Strength ◽  
Energy Storage Density ◽  
Dielectric Breakdown Strength ◽  
Storage Density

Improvement of Dielectric Breakdown Strength in (1-x)Sr0.7Ba0.3Nb2O6-xSr0.7Bi0.2TiO3 Ceramics

2020 ◽  
Vol 842 ◽  
pp. 153-159
Author(s):  
Lei Cao ◽  
Ying Yuan ◽  
En Zhu Li ◽  
Shu Ren Zhang
Keyword(s):  
Energy Storage ◽  
Dielectric Breakdown ◽  
Breakdown Strength ◽  
Relaxor Behavior ◽  
Energy Storage Density ◽  
Dielectric Breakdown Strength ◽  
Storage Density ◽  
Storage Performance

In this work, a series of (1-x)Sr0.7Ba0.3Nb2O6-xSr0.7Bi0.2TiO3 ceramics were formulated by a phase-mixed sintering, the microstructure and energy storage performance were studied. The introduction of SBT induces the formation of equiaxed crystals leading to the denser microstructure, thus improving the dielectric breakdown strength. In addition, the enhancement of relaxor behavior improves the energy storage performance. For 0.94Sr0.7Ba0.3Nb2O6-0.06Sr0.7Bi0.2TiO3, an energy storage density of 0.49J/cm3 and an efficiency of 94.2% were achieved.

All‐Organic Dielectrics with High Breakdown Strength and Energy Storage Density for High‐Power Capacitors

2021 ◽  
pp. 2100116
Author(s):  
Qi‐Kun Feng ◽  
Jiang‐Bo Ping ◽  
Jing Zhu ◽  
Jia‐Yao Pei ◽  
Lei Huang ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Power ◽  
Breakdown Strength ◽  
Energy Storage Density ◽  
Storage Density ◽  
Organic Dielectrics

Modulation and mechanism of spatial structure for multi-layer cyanate ester resin composites to achieve remarkably increased energy storage density and decreased dielectric loss

2020 ◽  
pp. 002199832095188
Author(s):  
Xiaobao Zhang ◽  
Li Yuan ◽  
Guozheng Liang ◽  
Aijuan Gu
Keyword(s):  
Energy Storage ◽  
Dielectric Loss ◽  
Spatial Structure ◽  
Breakdown Strength ◽  
Layer Structure ◽  
Single Layer ◽  
Cyanate Ester ◽  
Energy Storage Density ◽  
Spatial Structures ◽  
Storage Density

Overcoming sticky problems of large dielectric loss and poor breakdown strength ( Eb) is prerequisite of actual applications for high dielectric constant polymer composites. Herein, three kinds of multi-layer structure composites with different spatial structures (2MP-CE/CNT, CE/CNT-2MP-CE/CNT, MP-CE/CNT-MP) were prepared based on carbon nanotubes (CNTs), cyanate ester (CE) resin and mica paper (MP). Compared with traditional single-layer CE/CNT composite, multi-layer CE/CNT-2MP-CE/CNT composites, of which the middle layer is two pieces of MPs with a thickness of 60 µm, while both bottom and top layers are CE/CNT composite, simultaneously achieve 105 reduction in dielectric loss and 18.1 times increase in energy storage density ( Ue). Through modulating two sheets of MPs and CE/CNT as top and bottom layer, respectively, 2MP-CE/CNT composite with 60 μm MPs has the largest breakdown strength ( Eb), its Eb and Ue are severally about 7.1 and 19.5 times of those of CE/CNT composite. The relationship and mechanism between spatial structure and integrated performance such as dielectric properties, Eb and Ue of composites were systematically investigated. The attractive integrated performances of CE/CNT-2MP-CE/CNT and 2MP-CE/CNT composites are attributed to their unique composition and spatial structures, which bring special micro-capacitance and interfacial polarization, and thus leading to outstanding performances. Therefore, this investigation provides a strategy for getting desirable performances through building composites with specific spatial structure.

scholarly journals Significantly Enhanced Energy Storage Density by Modulating the Aspect Ratio of BaTiO3 Nanofibers

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
Dou Zhang ◽  
Xuefan Zhou ◽  
James Roscow ◽  
Kechao Zhou ◽  
Lu Wang ◽  
...  
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Aspect Ratio ◽  
Volume Fraction ◽  
Breakdown Strength ◽  
Electric Displacement ◽  
High Energy ◽  
High Energy Density ◽  
Energy Storage Density ◽  
Storage Density

Abstract There is a growing need for high energy density capacitors in modern electric power supplies. The creation of nanocomposite systems based on one-dimensional nanofibers has shown great potential in achieving a high energy density since they can optimize the energy density by exploiting both the high permittivity of ceramic fillers and the high breakdown strength of the polymer matrix. In this paper, BaTiO3 nanofibers (NFs) with different aspect ratio were synthesized by a two-step hydrothermal method and the permittivity and energy storage of the P(VDF-HFP) nanocomposites were investigated. It is found that as the BaTiO3 NF aspect ratio and volume fraction increased the permittivity and maximum electric displacement of the nanocomposites increased, while the breakdown strength decreased. The nanocomposites with the highest aspect ratio BaTiO3 NFs exhibited the highest energy storage density at the same electric field. However, the nanocomposites with the lowest aspect ratio BaTiO3 NFs achieved the maximal energy storage density of 15.48 J/cm3 due to its higher breakdown strength. This contribution provides a potential route to prepare and tailor the properties of high energy density capacitor nanocomposites.

Characterization and Energy Storage Density of BaTiO3 - Ba(Mg1/3Nb2/3)O3 Ceramics

2010 ◽  
Vol 654-656 ◽  
pp. 2045-2048 ◽  
Author(s):  
Yi Qiu Li ◽  
Han Xing Liu ◽  
Zhong Hua Yao ◽  
Jing Xu ◽  
Yun Jiang Cui ◽  
...  
Keyword(s):  
Energy Storage ◽  
Room Temperature ◽  
Breakdown Strength ◽  
Sintering Temperature ◽  
Hysteresis Loops ◽  
Energy Storage Density ◽  
Storage Density ◽  
Two Factors ◽  
Energy Storage Applications ◽  
Scanning Electron

The energy storage density of (1-x) BaTiO3 – x Ba(Mg1/3Nb2/3)O3 (x = 0, 0.1, 0.2, 0.3) ceramics was investigated. The microstructure of samples was characterized by scanning electron microscopy (SEM). The energy storage density was calculated from the P-E hysteresis loops measured at room temperature. Experimental results show that the energy storage density of 0.9 BaTiO3 – 0.1 Ba(Mg1/3Nb2/3)O3 ceramics is highest among all compositions. At 15.8kV/mm electric field, the energy storage density of the sample can reach up to 1.07J/cm3, which is about 1.5 times higher than pure BaTiO3. The improvement of the energy density can be due to two factors: one is the improved breakdown strength caused by the optimized microstructure, the other is the decreased remnant polarization. This result indicates that bulk 0.9 BaTiO3 – 0.1 Ba(Mg1/3Nb2/3)O3 ceramic has advantages compared with pure BaTiO3 ceramic for energy storage applications, and with further improvements in microstructure and reduction of sintering temperature, could be a good candidate for energy storage capacitors.

Effect of Gd2O3/BaF2 Addition on Dielectric Behavior and Energy Storage Properties of Strontium Barium Niobate Glass-Ceramics

2014 ◽  
Vol 633 ◽  
pp. 422-426
Author(s):  
Jun Song ◽  
Guo Hua Chen ◽  
Yu Tang
Keyword(s):  
Energy Storage ◽  
Breakdown Strength ◽  
Glass Ceramics ◽  
Phase Evolution ◽  
High Energy ◽  
Dielectric Behavior ◽  
Energy Storage Density ◽  
Storage Density ◽  
Energy Storage Properties ◽  
Storage Properties

SrO–BaO–Nb2O5–B2O3system glass-ceramics with Gd2O3/BaF2addition have been prepared by controlled crystallization method. The effect of Gd2O3/BaF2addition on the phase evolution, dielectric properties and energy storage properties has been investigated. The addition of Gd2O3/BaF2to the glass-ceramics changes the dielectric property and energy storage density. The glass-ceramics with 0.5 mol% Gd2O3and 4.5mol% BaF2heat treated at 850°C/3h possesses a dielectric constant of 125, a breakdown strength of 1055 kV/mm and energy storage density of 6.16J/cm3, which are promising materials for high energy storage density dielectrics.

Sign in / Sign up

Export Citation Format

Share Document