scholarly journals Equilibrium kinetic and isotherm studies of dye colour adsorption on the banana peel

2021 ◽  
Vol 920 (1) ◽  
pp. 012029
Author(s):  
A A A Bakar ◽  
W N R W Mazlan ◽  
I H Izaham ◽  
N S Azizan ◽  
K A M Ali ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Low Cost ◽  
Industrial Effluent ◽  
Model Fit ◽  
Synthetic Wastewater ◽  
Banana Peel ◽  
Order Kinetic ◽  
Food Industries ◽  
Pseudo Second Order ◽  
Blue Solution

Abstract Textile, paper, rubber, plastics, leather, cosmetics, pharmaceuticals, and food industries extensively employ dyes. This study aims to determine the best equilibrium kinetic and isotherm model of dye colour adsorption using waste adsorbent. Methylene blue (MB) is a dye colour contaminant that can be removed from wastewater via adsorption due to its ease of usage and cost-effectiveness. This study employed banana peels (BPs), a low-cost and waste adsorbent, to remove MB from synthetic wastewater. A series of batch equilibrium adsorption studies investigated the effect of different dosages of 0.05 to 0.4 grams, contact time of 15 to 150 minutes, and agitation speed of 150 rpm. BPs dosage is added from 0.05 g to 0.4 g in 100 ml of Methylene Blue solution. The concentration of MB in the samples was determined using a HACH DR2800 Spectrometer. According to the kinetic study analysis, the adsorption of MB followed a pseudo-second order kinetic with an R2 of 0.9934. Furthermore, the Freundlich model fit better than others based on the equilibrium isotherm investigation, with an R2 of 0.7688. As a result, BPs can be used as an alternative waste adsorbent media for extracting dye colours from industrial effluent.

scholarly journals Heterogeneous Fenton-Like Oxidation of Methylene Blue Using Alternative Catalysts

2021 ◽  
Vol 29 (48) ◽  
pp. 91-97
Author(s):  
Juraj Michálek ◽  
Kseniya Domnina ◽  
Veronika Kvorková ◽  
Kristína Šefčovičová ◽  
Klaudia Mončeková ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Methylene Blue ◽  
Low Cost ◽  
Hydrogen Peroxide Solution ◽  
Blue Dye ◽  
Order Kinetic ◽  
Heterogeneous Fenton ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Black Nickel

Abstract The usage of the low-cost catalysts for methylene blue removal from wastewater was investigated. Heterogeneous Fenton-like process consists of the use of a hydrogen peroxide solution, and an iron-rich catalyst, red mud and black nickel mud were used for that purpose. The factors such as the catalyst dose and the hydrogen peroxide solution volume were monitored. The results of experiments showed that the degradation of methylene blue dye in Fenton-like oxidation process using selected catalysts can be described by a pseudo-second-order kinetic model. The highest dye removal efficiency (87.15 %) was achieved using the black nickel mud catalyst after 30 minutes of reaction.

scholarly journals Mangosteen Peel-Alginate Biocomposite Beads An Efficient and Sustainable Adsorbent For Decontamination of Methylene Blue

2021 ◽  
Author(s):  
Asma Nasrullah ◽  
Amir Sada Khan ◽  
A. H. Bhat ◽  
Taghreed M. Fagieh ◽  
Ersaa M. Bakhsh ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Low Cost ◽  
Cost Effective ◽  
Alginate Beads ◽  
Basic Medium ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Removal Capacity ◽  
Pseudo Second Order ◽  
Best Fit

Abstract This study examines mangosteen peels waste and alginate beads (MPAB) as an efficient, sustainable and low-cost adsorbent for removal of methylene blue (MB) cationic dye from aqueous solution in a batch adsorption system. Surface functional groups, surface morphology, surface properties, and thermal stability of MBAB were analyzed using various instrumental techniques such as FTIR, FESEM, BET and TGA techniques. MPAB adsorption efficiency for MB was investigated through variation of dosage (0.01- 0.08g), pH (2- 10), contact time (60- 1320 min), MB concentration (20- 100 mg/L) and temperature (298- 333K). MPAB showed maximum removal capacity of 373 mg/g at 25 oC in basic medium. Kinetic and isotherm studies showed that pseudo second order kinetic models and both Freundlich and Langmuir isotherms best fit the experimental data. The findings revealed that novel MPAB has the potential to be a cost-effective adsorbent for removal of textile dyes.

scholarly journals Comparison of novel Ziziphus lotus adsorbent and industrial carbon on methylene blue removal from aqueous solutions

2018 ◽  
Vol 78 (10) ◽  
pp. 2055-2063
Author(s):  
Asmaa Msaad ◽  
Mounir Belbahloul ◽  
Samir El Hajjaji ◽  
Abdeljalil Zouhri
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Aqueous Solutions ◽  
Low Cost ◽  
Sorption Process ◽  
Second Order ◽  
Order Kinetic ◽  
Industrial Carbon ◽  
Freundlich Isotherms ◽  
Pseudo Second Order

Abstract In this work, the use of a novel low-cost adsorbent derived from Ziziphus lotus (ZL) and industrial carbon (IC) has been successfully applied to the removal of methylene blue (MB) from aqueous solutions. The efficiency of this material was studied through Lagergren pseudo-first-order and pseudo-second-order kinetic models. The process for the novel activated carbon and the IC were best represented by the pseudo-second-order rate model. Langmuir and Freundlich isotherms were used to describe the sorption equilibrium data. The Langmuir model turned out to be the most adequate and maximum capacities were measured to be 833.33 and 142.85 mg.g−1 for ZL activated carbon and IC from Sigma Aldrich, respectively. The thermodynamic study revealed that the sorption process is spontaneous and endothermic for the two adsorbents. To explain the effectiveness of MB removal, ZL activated carbon was characterized by scanning electron microscopy, Brunauer–Emmett–Teller surface area, X-ray diffraction and Fourier transform infrared spectroscopy.

scholarly journals Study of the Digestate as an Innovative and Low-Cost Adsorbent for the Removal of Dyes in Wastewater

Processes ◽  
2020 ◽  
Vol 8 (7) ◽  
pp. 852
Author(s):  
Sicong Yao ◽  
Massimiliano Fabbricino ◽  
Marco Race ◽  
Alberto Ferraro ◽  
Ludovico Pontoni ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Contact Time ◽  
Removal Rate ◽  
Low Cost ◽  
Second Order ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Diffusion Kinetic ◽  
Pseudo Second Order

Digestate, as an urban solid waste, was considered as an innovative adsorbent for colorant polluted wastewater. Batch adsorption experiments were carried out using digestate as an adsorbent material to remove various dyes belonging to different categories. The removal rate and adsorption capacity of dyes were evaluated and the dose of digestate, contact time, and initial dye concentration were studied. The maximum removal rate was approximately 96% for Methylene Blue. The equilibrium time for the Methylene Blue was 4 h, while for other dyes, a longer contact time was required to reach the equilibrium. The suspicion of colloidal matter release into the solution from solid fraction of the digestate led to the investigation of the consequence of a washing step of the digestate adsorbent upstream the adsorption experiment. Washed and not washed adsorbents were tested and the differences between them in terms of dye removal were compared. Moreover, experimental data were fitted by pseudo-first order, pseudo-second order, and intra-partial diffusion kinetic models as well as Langmuir, Freundlich, and Sips isotherm models. The results from fitted models showed that the adsorption of various dyes onto the digestate was mostly well fitted by the Langmuir isotherm and pseudo-second-order kinetic model.

scholarly journals Syringa vulgaris leaves powder a novel low-cost adsorbent for methylene blue removal: isotherms, kinetics, thermodynamic and optimization by Taguchi method

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Giannin Mosoarca ◽  
Cosmin Vancea ◽  
Simona Popa ◽  
Marius Gheju ◽  
Sorina Boran
Keyword(s):  
Methylene Blue ◽  
Low Cost ◽  
Dye Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorbent Surface ◽  
Order Kinetic Model ◽  
Endothermic Process ◽  
Pseudo Second Order ◽  
Better Than

Abstract In this study, the potential of a new low-cost adsorbent, Syringa vulgaris leaves powder, for methylene blue adsorption from aqueous solution was investigated. The adsorbent surface was examined using SEM and FTIR techniques. The experiments were conducted, in batch system, to find out the effect of pH, contact time, adsorbent dose, initial dye concentration, temperature and ionic strength on dye adsorption. The process is best described by Langmuir isotherm and the pseudo second order kinetic model. Maximum adsorption capacity, 188.2 (mg g−1), is better than other similar adsorbent materials. Thermodynamic parameters revealed a spontaneous and endothermic process, suggesting a physisorption mechanism. A Taguchi orthogonal array (L27) experimental design was used to determine the optimum conditions for the removal of dye. Various desorbing agents were used to investigate the regeneration possibility of used adsorbent. Results suggest that the adsorbent material is very effective for removal of methylene blue from aqueous solutions.

Adsorptive Removal of p-Nitrophenol (p-NP) On Charred Jute Stick

2010 ◽  
Vol 8 (1) ◽  
Author(s):  
Md. Ahmaruzzaman ◽  
Sorokhaibam Laxmi Gayatri
Keyword(s):  
Kinetic Model ◽  
Low Cost ◽  
Synthetic Wastewater ◽  
Order Kinetic ◽  
Batch Studies ◽  
Operating Variables ◽  
Phenol Derivatives ◽  
Salt Addition ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The removal of phenol derivatives from waste waters is of great concern because of the extreme toxicity and persistency. The present study deals with the adsorption of p-nitrophenol from aqueous solution onto jute stick char. Jute stick is a solid waste obtained from the agricultural firms and jute industry. Batch studies were carried out with synthetic wastewater having p-nitrophenol concentration of 1000 ppm using jute stick char as a low cost adsorbent. The operating variables studied are adsorbent dose, pH, contact time, effect of salt addition, and initial p-nitrophenol concentration etc. The adsorption data was analyzed using Freundlich and Langmuir models. The experimental results showed that Freundlich model appear to fit the isotherm data better than the Langmuir model. Optimum conditions for p-nitrophenol were found to be at pH= 7.6 and equilibrium time 5 h. The pseudo-second order kinetic model provides the best correlation of the experimental data compared to the pseudo-first-order kinetic model.

Adsorptive Removal of Methylene Blue by Ginkgo Leaf Powder

2011 ◽  
Vol 130-134 ◽  
pp. 829-832
Author(s):  
Jin Xia Mu ◽  
Ming Juan Shi ◽  
Xiao Ying Wu ◽  
Jin Ye Li
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Low Cost ◽  
Sorption Kinetics ◽  
Second Order ◽  
Order Kinetic ◽  
Freundlich Isotherms ◽  
Leaf Powder ◽  
Pseudo Second Order ◽  
Ginkgo Leaf

The adsorption of methylene blue (MB) from aqueous solution using a low-cost adsorbent, ginkgo leaf powder, has been studied. The equilibrium data were fitted to Langmuir and Freundlich isotherms and the equilibrium adsorption was best described by the Langmuir isotherm model with maximum monolayer adsorption capacities found to be 39 mg/g. The sorption was analyzed using pseudo-first-order and pseudo-second order kinetic models, and the sorption kinetics was found to follow a pseudo-second order kinetic model. Ginkgo leaf appears as a prospective adsorbent for the removal of methylene blue from aqueous solution.

The Study of the Modified Grain Sorghum Stalk to Remove Methylene Blue Dye from Aqueous Solution

2012 ◽  
Vol 430-432 ◽  
pp. 197-201
Author(s):  
Feng Yu Li ◽  
Sheng Hua Zhang ◽  
Jin Yi Chen
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Low Cost ◽  
Grain Sorghum ◽  
Blue Dye ◽  
Order Kinetic ◽  
Adsorption Processes ◽  
Effects Of Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Pyromellitic dianhydride(PMDA）- modified grain sorghum stalk was used as a novel low-cost adsorbent to remove cationic dye methylene blue(MB) from aqueous solution. Bath studies were carried out to investigate the effects of pH and retention time on the adsorption of MB. The adsorption process could obtain >98% removal percentage within 30 minutes as the MB concentration was at 200 and 300 mg/L. And for 400 mg/L MB, 99% was removed in 6 hrs. The kinetics study showed that the adsorption processes followed the pseudo-second-order kinetic model, which confirming that the sorption rate is controlled by chemical adsorption. Equilibrium isotherms were analyzed by the Langmuir and Freundlich models. Langmuir model can be fitted better than Freundlich with maximum monolayer adsorption capacity of 568.18 mg/g for MB.

scholarly journals Methylene Blue Adsorption onto Cockle Shells-Treated Banana Pith: Optimization, Isotherm, Kinetic, and Thermodynamic Studies

2020 ◽  
Vol 20 (2) ◽  
pp. 368
Author(s):  
Rosalyza Hasan ◽  
Wong Jie Ying ◽  
Chong Chi Cheng ◽  
Nur Farhana Jaafar ◽  
Rohayu Jusoh ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Low Cost ◽  
Alkaline Treatment ◽  
Order Kinetic ◽  
Positive Role ◽  
Independent Variables ◽  
Initial Ph ◽  
Pseudo Second Order ◽  
Kinetic And Thermodynamic Studies

Two low-cost wastes, banana pith (BP) and cockle shells (CS) were explored towards methylene blue (MB) removal. The performance of cockle shells-treated banana pith (CS-BP) in MB removal was compared with untreated BP and commercially Ca(OH)2-treated BP (Ca(OH)2-BP). The adsorption efficacy was following the order of BP < CS-BP < Ca(OH)2-BP, indicating the positive role of alkaline treatment towards MB removal and great potential of CS as a low-cost activation material. The optimization of MB removal onto CS-BP was executed by response surface methodology (RSM) with three independent variables (adsorbent dosage (X1), initial pH (X2) and initial MB concentration (X3)), and the optimal condition was achieved at X1 = 1.17 g/L, X2 = pH 7 and X3 = 214 mg/L, with 87.32% of predicted MB removal. The experimental data well-fitted the pseudo-second-order kinetic (R2 > 0.99) and the Langmuir isotherm (R2 = 0.999) models, demonstrating the chemisorption and naturally homogeneous process. Thermodynamics study discovered that the MB removal by CS-BP is endothermic, feasible, spontaneous and randomness growth at a solid-solute interface. It is affirmed that CS could be employed as a low-cost activation material and CS-BP as a low-cost adsorbent.

scholarly journals Optimization of Process Parameters by Response Surface Methodology for Methylene Blue Removal Using Cellulose Dusts

2018 ◽  
Vol 4 (3) ◽  
pp. 620 ◽  
Author(s):  
Seyed Hassan Sharifi Pajaie ◽  
Saltanat Archin ◽  
Ghasem Asadpour
Keyword(s):  
Methylene Blue ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Batch Process ◽  
Second Order ◽  
Order Kinetic ◽  
Effective Parameters ◽  
Paper Mills ◽  
Adsorbent Dosage ◽  
Pseudo Second Order

This study was aimed to use Cellulose dusts (CD) produced in drying section of paper mills of paper making industry as a potential adsorbent to remove methylene blue (MB) dye from aqueous solution.  The adsorbent was characterized by scanning electron microscopy and Fourier transform infrared spectrometer and X-ray Diffraction. The influences of the effective parameters including pH solution, adsorbent dosage, initial MB concentration, and contact time were optimized by CCD which stands for central composite design. The influence of these parameters on the adsorption capacity was analyzed using the batch process. The accuracy of the equation that is produced by CCD was affirmed by the variance analysis and also by calculating the correlation coefficient that connects the predicted and the empirical values of the percentage of removed MB dye. Maximum removal percentage of MB dye (98.05 %) which obtained at pH 9.84, adsorbent dosage 4.38 g L-1, MB concentration 75.50 g L-1 and time 208.13 min. Freundlich, Temkin, Harkins-Jura and Langmuir isotherms are used to analyze the empirical data. Results revealed that the data is in a satisfying agreement with the Freundlich isotherm (R2= 0.99). Pseudo-first order, Pseudo-second-order, Elovich and Intraparticle diffusion models were used to fit the kinetic data and it is found out that MB dye’s adsorption onto CD has a good agreement with the pseudo-second-order kinetic model. The results showed that CD can be an efficient and low-cost adsorbent for methylene blue adsorption.

Sign in / Sign up

Export Citation Format

Share Document