scholarly journals Heterogeneous Fenton-Like Oxidation of Methylene Blue Using Alternative Catalysts

2021 ◽  
Vol 29 (48) ◽  
pp. 91-97
Author(s):  
Juraj Michálek ◽  
Kseniya Domnina ◽  
Veronika Kvorková ◽  
Kristína Šefčovičová ◽  
Klaudia Mončeková ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Methylene Blue ◽  
Low Cost ◽  
Hydrogen Peroxide Solution ◽  
Blue Dye ◽  
Order Kinetic ◽  
Heterogeneous Fenton ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Black Nickel

Abstract The usage of the low-cost catalysts for methylene blue removal from wastewater was investigated. Heterogeneous Fenton-like process consists of the use of a hydrogen peroxide solution, and an iron-rich catalyst, red mud and black nickel mud were used for that purpose. The factors such as the catalyst dose and the hydrogen peroxide solution volume were monitored. The results of experiments showed that the degradation of methylene blue dye in Fenton-like oxidation process using selected catalysts can be described by a pseudo-second-order kinetic model. The highest dye removal efficiency (87.15 %) was achieved using the black nickel mud catalyst after 30 minutes of reaction.

The Study of the Modified Grain Sorghum Stalk to Remove Methylene Blue Dye from Aqueous Solution

2012 ◽  
Vol 430-432 ◽  
pp. 197-201
Author(s):  
Feng Yu Li ◽  
Sheng Hua Zhang ◽  
Jin Yi Chen
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Low Cost ◽  
Grain Sorghum ◽  
Blue Dye ◽  
Order Kinetic ◽  
Adsorption Processes ◽  
Effects Of Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Pyromellitic dianhydride(PMDA）- modified grain sorghum stalk was used as a novel low-cost adsorbent to remove cationic dye methylene blue(MB) from aqueous solution. Bath studies were carried out to investigate the effects of pH and retention time on the adsorption of MB. The adsorption process could obtain >98% removal percentage within 30 minutes as the MB concentration was at 200 and 300 mg/L. And for 400 mg/L MB, 99% was removed in 6 hrs. The kinetics study showed that the adsorption processes followed the pseudo-second-order kinetic model, which confirming that the sorption rate is controlled by chemical adsorption. Equilibrium isotherms were analyzed by the Langmuir and Freundlich models. Langmuir model can be fitted better than Freundlich with maximum monolayer adsorption capacity of 568.18 mg/g for MB.

scholarly journals Methylene Blue Dye Removal from Aqueous Media Using Activated Carbon Prepared by Lotus Leaves: Kinetic, Equilibrium and Thermodynamic Study

2021 ◽  
Vol 68 (2) ◽  
pp. 363-373
Author(s):  
Roya Salahshour ◽  
Mehdi Shanbedi ◽  
Hossein Esmaeili
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Sorption Process ◽  
Second Order ◽  
Blue Dye ◽  
Order Kinetic ◽  
Methylene Blue Dye ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Lotus Leaves

In the present work, methylene blue was eliminated from aqueous solution using activated carbon prepared by lotus leaves. To perform the experiments, batch method was applied. Also, several analyses such as SEM, FTIR, EDAX and BET were done to determine the surface properties of the activated carbon. The results showed that the maximum sorption efficiency of 97.59% was obtained in initial dye concentration of 10 mg/L, pH of 9, adsorbent dosage of 4 g/L, temperature of 25 °C, contact time of 60 min and mixture speed of 400 rpm. Furthermore, the maximum adsorption capacity was determined 80 mg/g, which was a significant value. The experimental data was analyzed using pseudo-first order, pseudo-second order and intra-particle diffusion kinetic models, which the results showed that the pseudo-second order kinetic model could better describe the kinetic behavior of the sorption process. Also, the constant rate of the pseudo-second order kinetic model was obtained in the range of 0.0218–0.0345 g/mg.min. Moreover, the adsorption equilibrium was well described using Freundlich isotherm model. Furthermore, the thermodynamic studies indicated that the sorption process of methylene blue dye using the activated carbon was spontaneous and exothermic.

scholarly journals Syringa vulgaris leaves powder a novel low-cost adsorbent for methylene blue removal: isotherms, kinetics, thermodynamic and optimization by Taguchi method

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Giannin Mosoarca ◽  
Cosmin Vancea ◽  
Simona Popa ◽  
Marius Gheju ◽  
Sorina Boran
Keyword(s):  
Methylene Blue ◽  
Low Cost ◽  
Dye Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorbent Surface ◽  
Order Kinetic Model ◽  
Endothermic Process ◽  
Pseudo Second Order ◽  
Better Than

Abstract In this study, the potential of a new low-cost adsorbent, Syringa vulgaris leaves powder, for methylene blue adsorption from aqueous solution was investigated. The adsorbent surface was examined using SEM and FTIR techniques. The experiments were conducted, in batch system, to find out the effect of pH, contact time, adsorbent dose, initial dye concentration, temperature and ionic strength on dye adsorption. The process is best described by Langmuir isotherm and the pseudo second order kinetic model. Maximum adsorption capacity, 188.2 (mg g−1), is better than other similar adsorbent materials. Thermodynamic parameters revealed a spontaneous and endothermic process, suggesting a physisorption mechanism. A Taguchi orthogonal array (L27) experimental design was used to determine the optimum conditions for the removal of dye. Various desorbing agents were used to investigate the regeneration possibility of used adsorbent. Results suggest that the adsorbent material is very effective for removal of methylene blue from aqueous solutions.

scholarly journals Adsorptive Removal of Methylene Blue onto ZnCl2Activated Carbon from Wood Apple Outer Shell: Kinetics and Equilibrium Studies

2011 ◽  
Vol 8 (4) ◽  
pp. 1696-1707 ◽  
Author(s):  
N. Bhadusha ◽  
T. Ananthabaskaran
Keyword(s):  
Methylene Blue ◽  
Outer Shell ◽  
Blue Dye ◽  
Order Kinetic ◽  
Biomass Waste ◽  
Equilibrium Studies ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Limonia Acidissima

Methylene blue dye removal from aqueous solution was investigated using ZnCl2activated carbon prepared from wood apple outer shell (Limonia acidissima, biomass waste). Influence of agitation time, adsorbent dose, dye concentration, pH and temperature were explored. Two theoretical adsorption isotherms namely Langmuir and Freundlich were used to describe the experimental results. The Langmuir adsorption capacity (Qo) was found to be 35.1 mg/g and the equilibrium parameter (RL) values indicate favourable adsorption. The experimental data were well fitted with Langmuir isotherm model and pseudo second order kinetic model. Desorption studies showed that ion exchange mechanism might be involved in the adsorption process.

scholarly journals Application of Synthetic Layered Sodium Silicate Magadiite Nanosheets for Environmental Remediation of Methylene Blue Dye in Water

2017 ◽  
Author(s):  
Mohamed Mokhtar
Keyword(s):  
Methylene Blue ◽  
Environmental Remediation ◽  
Average Crystallite Size ◽  
Bet Surface Area ◽  
Blue Dye ◽  
Order Kinetic ◽  
Nano Clay ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Autogenous Pressure

The removal of methylene blue (MB) dye from water was investigated using synthetic nano-clay magadiite (SNCM). SNCM was synthesized by hydrothermal treatment under autogenous pressure. A rosette-shaped single mesoporous magadiite phase with 16.63 nm average crystallite size and 33 m2.g-1 BET-surface area was recorded. The adsorption results indicated the pronounced affinity of the SNCM to the MB dye molecules which reached adsorption uptake of 20.0 mg MB dye/g of SNCM. The elimination of MB dye by the SNCM was kinetically and thermodynamically considered; a pseudo second order kinetic model was attained, and a spontaneous, chemical, and exothermic in nature was verified.

scholarly journals Adsorption-Desorption Profile of Methylene Blue Dye on Raw and Acid Activated Kaolinite

2020 ◽  
Vol 20 (4) ◽  
pp. 755
Author(s):  
Nurul Ain Safiqah Md Sandollah ◽  
Sheikh Ahmad Izaddin Sheikh Mohd Ghazali ◽  
Wan Nazihah Wan Ibrahim ◽  
Ruhaida Rusmin
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Cost Effective ◽  
Blue Dye ◽  
Order Kinetic ◽  
Kaolinite Clay ◽  
Freundlich Model ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Adsorption Desorption

The efficiencies of raw (RK) and acid activated (0.5 M AAK) kaolinite clay minerals to remove methylene blue (MB) dyes in aqueous solution were investigated and compared. The 0.5 M AAK was prepared by treatment of RK in dilute 0.5 M HCl aqueous solution under reflux. Kaolinite adsorbents were characterized and their MB removal performances were evaluated via the batch method. MB desorption from spent kaolinites was investigated at pH 4 to 8. The MB removal was increased with increasing initial dye concentration, agitation speed and adsorbent dosage in 60 min reaction time at pH 6. Both kaolinites showed high MB removal (up to 97%). The Freundlich model has the best-fit equilibrium adsorption isotherm model for RK and 0.5 M AAK. The kinetic data for both adsorbents showed strong agreement with the pseudo second order kinetic model (r2 > 0.98). Nevertheless, the spent RK adsorbent demonstrated a significant higher MB retention than 0.5 M AAK in desorption experiments. Kaolinite clays have great potential as cost-effective materials for dyes removal in wastewater treatment.

scholarly journals Removal of methylene blue by biosorption onto Stipa tenacissima L. (Alfa) plants: Kinetics, equilibrium and thermodynamic studies

2021 ◽  
pp. 33-44
Author(s):  
Samir Ladjali ◽  
Nadjib Dahdouh ◽  
Samira Amokrane ◽  
El Mekatel ◽  
Djamel Nibou
Keyword(s):  
Methylene Blue ◽  
Contact Time ◽  
Blue Dye ◽  
Order Kinetic ◽  
Liquid Ratio ◽  
Stipa Tenacissima ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Solid Liquid

This study examines the ability of Stipa tenacissima L. (Alfa) to biosorb the Methylene Blue dye. Biosorption tests were performed in aqueous solution based on certain essential parameters such as solution?s pH (2-12), solid/liquid ratio (1-6 g/L), initial dye concentration (25-125 mg/L) and contact time (0-300 min). The Langmuir, Freundlich, Temkin and Elovich models were applied. It was found that the equilibrium data could be fitted to the Langmuir isotherm for MB biosorption with a maximum capacity qmax 55, 95 mg/g. The kinetic study shows that the experimental data correspond to the pseudo-second order kinetic model. The negative Gibbs values free energy ?G? reveal the spontaneity of MB biosorption at the surface of Stipa tenacissima L. The positive value of ?H? reveals the endothermic nature of the process.

scholarly journals Adsorption of methylene blue on an agro-waste oiltea shell with and without fungal treatment

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Jiayang Liu ◽  
Enzhong Li ◽  
Xiaojuan You ◽  
Changwei Hu ◽  
Qingguo Huang
Keyword(s):  
Methylene Blue ◽  
Low Cost ◽  
Adsorptive Capacity ◽  
Chemical Compositions ◽  
Order Kinetic ◽  
Lignocellulosic Waste ◽  
Fungal Treatment ◽  
Sorption Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Abstract A lignocellulosic waste oiltea shell (OTS) was evaluated as an inexpensive sorbent to remove methylene blue (MB) from aqueous solution. Fungal treatment of OTS increased the MB adsorption by modifying the physicochemical properties of OTS and simultaneously produced laccase as a beneficial co-product. Without fungal treatment, the maximum amount of adsorption (q m) of MB by OTS was 64.4 mg/g, whereas the treatment with fungus Pycnoporus sp. and Trametes versicolor increased q m up to 72.5 mg/g and 85.7 mg/g, respectively. This is because of the improved surface area and pore sizes as well as altered chemical compositions. The equilibrium sorption data for OTS both with and without treatment fitted to the Langmuir model, and the sorption rate data well fitted to the pseudo second-order kinetic model. The changes in free energy (ΔG°) and separation factor (R L ) indicated that the sorption was spontaneous and favorable. Scanning electron microscopy and Fourier transform infrared spectroscopy showed the changes in the surface morphology and functional groups of OTS after fungal treatment. The agro-waste OTS could be utilized as a low-cost adsorbent for efficient dye removal, and fungal treatment can serve as a mild and clean technique to increase the adsorptive capacity of OTS.

Removal of Methylene Blue Dye by Using Eggshell Powder

2013 ◽  
Vol 65 (1) ◽  
Author(s):  
Norzita Ngadi ◽  
Chin Chiek Ee ◽  
Nor Aida Yusoff
Keyword(s):  
Methylene Blue ◽  
Textile Industry ◽  
Low Cost ◽  
Kinetic Studies ◽  
Operating Conditions ◽  
Blue Dye ◽  
Dye Wastewater ◽  
Order Model ◽  
Aquatic Life ◽  
Pseudo Second Order

Dyes contain carcinogenic materials which can cause serious hazards to aquatic life and the users of water. Textile industry is the main source of dye wastewater which results in environmental pollution. Many studies have been conducted to investigate the use of low cost adsorbent as an alternative technique for the adsorption of dye. The objective of this study is to determine the potential of eggshell powder as an adsorbent for methylene blue removal and find out the best operating conditions for the color adsorption at laboratory scale. The adsorption of cationic methylene blue from aqueous solution onto the eggshell powder was carried out by varying the operating parameters which were contact time, pH, dosage of eggshell powder and temperature in order to study their effect in adsorption capacity of eggshell powder. The results obtained showed that the best operating condition for removal of methylene blue was at pH 10 (78.98 %) and temperature 50°C (47.37 %) by using 2 g of eggshell powder (57.03 %) with 30 minutes equilibrium time (41.36 %). The kinetic studies indicated that pseudo-second-order model best described the adsorption process.

scholarly journals Biosorption of Congo Red and Methylene Blue by pretreated waste Streptomyces fradiae biomass - Equilibrium, kinetic and thermodynamic studies

2018 ◽  
Vol 83 (1) ◽  
pp. 107-120 ◽  
Author(s):  
Zdravka Velkova ◽  
Gergana Kirova ◽  
Margarita Stoytcheva ◽  
Velizar Gochev
Keyword(s):  
Methylene Blue ◽  
Congo Red ◽  
Contact Time ◽  
Order Kinetic ◽  
Batch Experiments ◽  
Streptomyces Fradiae ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Kinetic And Thermodynamic Studies ◽  
Pretreated Biomass

Pretreated waste Streptomyces fradiae biomass was utilized as an eco-friendly sorbent for Congo Red (CR) and Methylene Blue (MB) removal from aqueous solutions. The biosorbent was characterized by Fourier transform infrared spectroscopy. Batch experiments were conducted to study the effect of pH, biosorbent dosage, initial concentration of adsorbates, contact time and temperature on the biosorption of the two dyes. The equilibrium adsorption data were analysed using Freundlich and Langmuir models. Both models fitted well the experimental data. The maximum biosorption capacity of the pretreated Streptomyces fradiae biomass was 46.64 mg g-1 for CR and 59.63 mg g-1 for MB, at a pH 6.0, with the contact time of 120 min, the biosorbent dosage of 2 g dm-3 and the temperature of 298 K. Lagergren and Ho kinetic models were used to analyse the kinetic data obtained from different batch experiments. The biosorption of both dyes followed better the pseudo-second order kinetic model. The calculated values for ?G, ?S, and ?H indicated that the biosorption of CR and MB onto the waste pretreated biomass was feasible, spontaneous, and exothermic in the selected temperature range and conditions.

Sign in / Sign up

Export Citation Format

Share Document