scholarly journals Facile synthesis of hierarchical ZnO structure for photocatalytic degradation of dimethyl phthalate

2021 ◽  
Vol 945 (1) ◽  
pp. 012017
Author(s):  
Chin Ying Hui ◽  
Sin Jin Chung ◽  
Lam Sze Mun
Keyword(s):  
Photocatalytic Degradation ◽  
Hexagonal Wurtzite Structure ◽  
Precipitation Method ◽  
Order Kinetic ◽  
Dimethyl Phthalate ◽  
Endocrine Disrupting Chemical ◽  
X Ray ◽  
Analytical Instruments ◽  
Uv Lamp ◽  
Co Precipitation

Abstract A facile co-precipitation method was employed to fabricate hierarchical ZnO structure and characterized by various analytical instruments. The images of ZnO from field-emission scanning electron microscopy exhibited spheroidal morphology which composed of numerous layers of nanosheets and formed a hierarchical structure. Energy dispersive X-ray spectrum validated the presence of Zn and O atoms and its purity. X-ray diffraction pattern of ZnO revealed the establishment of hexagonal wurtzite structure. Optical property analysis disclosed that the as-fabricated ZnO had strong absorbance of wavelength from 350-410 nm with an absorption band edge of 367 nm. In this paper, the photocatalytic activity of hierarchical ZnO structure was confirmed by degradation of endocrine disrupting chemical, namely dimethyl phthalate under UV lamp irradiation. The photodegradation of dimethyl phthalate in aqueous solution over as-fabricated ZnO reached 55.9% after 60 min irradiation. The photocatalytic degradation of DMP obeyed the pseudo first-order kinetic reaction with a rate constant of 0.0166 min−1.

Structural Properties of Cu-Doped ZnO Prepared by Coprecipitation Method

2021 ◽  
Vol 1028 ◽  
pp. 90-95
Author(s):  
Kharisma Noor Afifah Supoyo ◽  
Mohammad Syaiful Anwar ◽  
Retno Asih ◽  
Malik Anjelh Baqiya ◽  
Prae Chirawatkul ◽  
...  
Keyword(s):  
Structural Properties ◽  
Hexagonal Wurtzite Structure ◽  
Host Lattice ◽  
Precipitation Method ◽  
Zno Nanoparticle ◽  
X Ray ◽  
As Doping ◽  
Refinement Method ◽  
Co Precipitation ◽  
X Ray Absorption

An experimental study to determine the effect of Cu doping on structural properties of ZnO nanoparticle has been conducted. Zn1-xCuxO (CZO) were prepared by co-precipitation method by varying Cu concentration with x = 0.00, 0.10, 0.11 and 0.12. The structural properties of the CZO sample were characterized by X-Ray diffraction (XRD) and X-ray Absorption Spectroscopy (XAS), which consist of XANES (X-ray Absorption Near-Edge Spectroscopy) and EXAFS (Extended X-ray Absorption Fine Structure). XAS measurements were performed in the energy of Cu K-edge and Zn K-edge using synchrotron radiation at SLRI (Synchrotron Light Research Institute) in Thailand. Both Cu K-edge and Zn K-edge XANES spectra indicate that the oxidation states of Cu and Zn ions are 2+. Analysis of XRD data with refinement method using Rietica software confirms the presence of Cu as doping in ZnO host lattice with the crystallite size ranging between 26 and 44 nm. Moreover, it shows that the obtained CZO samples are polycrystalline with (002) predominant reflection and exhibit a hexagonal wurtzite structure.

scholarly journals Efficient solar heterogeneous photocatalytic degradation of metronidazole using heterojunction semiconductors hybrid nanocomposite, layered double hydroxides

2020 ◽  
Vol 82 (12) ◽  
pp. 2837-2846
Author(s):  
Farid Aoudjit ◽  
Fouzia Touahra ◽  
Lamine Aoudjit ◽  
Ouiza Cherifi ◽  
Djamilla Halliche
Keyword(s):  
Photocatalytic Degradation ◽  
Layered Double Hydroxides ◽  
Environmental Remediation ◽  
Solar Irradiation ◽  
Precipitation Method ◽  
Catalyst Loading ◽  
X Ray ◽  
Constant Ph ◽  
Co Precipitation ◽  
Double Hydroxides

Abstract This study focuses on the synthesis of various nanocomposites with heterojunction structures, MgAl-LDH (LDH = layered double hydroxides) hybrid with semiconductor such as MoO3 and CuO. These solids were synthesized by co-precipitation method at constant pH and have been characterized extensively using atomic absorption spectroscopy (AAS), X-ray diffraction (XRD), Fourier transform infrared (FTIR) and transmission electron microscopy-energy dispersive X-ray (TEM-EDX) methods. The catalytic activity of nanocomposites was tested in the photocatalytic degradation under solar irradiation of emerging pollutants as the pharmaceutical metronidazole (MNZ). The experimental parameters, including initial MNZ concentration, the nature of oxide incorporate in the photocatalyst, catalyst loading were explored. All the synthesized samples showed high photocatalytic performances; the highest photocatalysis efficiency was achieved with the photocatalyst dose 1.5 g/L and initial MNZ concentration of 10 mg/L at neutral pH. The photocatalytic experimental results were fitted very well to the Langmuir-Hinshelwood model. From the obtained results the calcined LDH/semiconductors could be efficient for the photocatalytic process under solar irradiation of pharmaceuticals and may contribute in environmental remediation.

scholarly journals Photoluminescent Properties of Hydroxyapatite and Hydroxyapatite/Multi-Walled Carbon Nanotube Composites

Crystals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 832
Author(s):  
Edna X. Figueroa-Rosales ◽  
Javier Martínez-Juárez ◽  
Esmeralda García-Díaz ◽  
Daniel Hernández-Cruz ◽  
Sergio A. Sabinas-Hernández ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Hexagonal Phase ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Multi Walled Carbon Nanotube ◽  
Nanotube Composites ◽  
Carbon Nanotube Composites ◽  
Co Precipitation ◽  
Functionalized Mwcnts

Hydroxyapatite (HAp) and hydroxyapatite/multi-walled carbon nanotube (MWCNT) composites were obtained by the co-precipitation method, followed by ultrasound-assisted and microwave radiation and thermal treatment at 250 °C. X-ray diffraction (XRD) confirmed the presence of a hexagonal phase in all the samples, while Fourier-transform infrared (FTIR) spectroscopy elucidated the interaction between HAp and MWCNTs. The photoluminescent technique revealed that HAp and the composite with non-functionalized MWCNTs present a blue luminescence, while the composite with functionalized MWCNTs, under UV-vis radiation shows an intense white emission. These findings allowed presentation of a proposal for the use of HAp and HAp with functionalized MWCNTs as potential materials for optoelectronic and medical applications.

scholarly journals Adsorption and Photocatalytic Mineralization of Bromophenol Blue Dye with TiO2 Modified with Clinoptilolite/Activated Carbon

Catalysts ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 7
Author(s):  
Emmanuel Kweinor Tetteh ◽  
Sudesh Rathilal
Keyword(s):  
Activated Carbon ◽  
Photocatalytic Degradation ◽  
Oxygen Demand ◽  
Freundlich Isotherm ◽  
Reaction Rate Constant ◽  
Coefficient Of Determination ◽  
Bromophenol Blue ◽  
Blue Dye ◽  
Order Kinetic ◽  
Co Precipitation

This study presents a hybridized photocatalyst with adsorbate as a promising nanocomposite for photoremediation of wastewater. Photocatalytic degradation of bromophenol blue (BPB) in aqueous solution under UV-irradiation of wavelength 400 nm was carried out with TiO2 doped with activated carbon (A) and clinoptilolite (Z) via the co-precipitation technique. The physiochemical properties of the nanocomposite (A–TiO2 and Z–TiO2) and TiO2 were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier-transform infrared (FTIR) spectroscopy. Results of the nanocomposite (A–TiO2 and Z–TiO2) efficiency was compared to that with the TiO2, which demonstrated their adsorption and synergistic effect for the removal of chemical oxygen demand (COD) and color from the wastewater. At an optimal load of 4 g, the photocatalytic degradation activity (Z–TiO2 > A–TiO2 > TiO2) was found favorably by the second-order kinetic model. Consequently, the Langmuir adsorption isotherms favored the nanocomposites (Z–TiO2 > A–TiO2), whereas that of the TiO2 fitted very well on the Freundlich isotherm approach. Z–TiO2 evidently exhibited a high photocatalytic efficacy of decomposition over 80% of BPB (COD) at reaction rate constant (k) and coefficient of determination (R2) values of 5.63 × 10−4 min−1 and 0.989, respectively.

scholarly journals Evaluation of Fe-Mg Binary Oxide for As (III) Adsorption—Synthesis, Characterization and Kinetic Modelling

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 805
Author(s):  
Saif Ullah Khan ◽  
Rumman Zaidi ◽  
Feroz Shaik ◽  
Izharul Haq Farooqi ◽  
Ameer Azam ◽  
...  
Keyword(s):  
Arsenic Removal ◽  
Kinetic Modelling ◽  
Arsenic Concentration ◽  
Experimental Studies ◽  
Precipitation Method ◽  
Arsenic Adsorption ◽  
Adsorbent Dosage ◽  
X Ray ◽  
Co Precipitation ◽  
Contaminated Waters

Nanotechnology has received much attention in treating contaminated waters. In the present study, a facile co-precipitation method was employed to synthesize a novel iron and magnesium based binary metal oxide using a stoichiometrically fixed amount of FeNO3.9H2O and MgNO3.6H2O in a proportion of molar concentration 1:1 and was later evaluated in removing As (III) from contaminated waters. Characterization of the prepared nanomaterial was done using X-ray diffraction (XRD), scanning electron microscopy (SEM), Energy Dispersive X-Ray Analysis (EDAX) and ultraviolet–visible spectrophotometry (UV-VIS). Experimental studies on batch scale were carried out, examining the effect of varying initial concentrations of metal, adsorbent dosage, application time and initial pH on removal efficiency. Arsenic removal increased on increasing adsorbent dosage (0.1–1 g/L) but trend reversed on increasing initial arsenic concentration attaining qmax of 263.20 mg/g. Adsorption was quite efficient in pH range 4–8. Freundlich fitted better for adsorption isotherm along with following Pseudo-2nd order kinetics. The reusability and effect of co-existing ions on arsenic adsorption, namely SO42−, CO32− and PO43− were also explored with reusability in 1st and 2nd cycles attained adsorptive removal up to 77% and 64% respectively. The prepared nano-adsorbent showed promising results in terms of high arsenic uptake (qmax of 263.20 mg/g) along with facile and cost-effective synthesis. Thus, the co-precipitation technique used in this work is a simple one step procedure without any use of any precursor as compared to most of the other procedures used for synthesis.

Photocatalytic Activity of Fe-Doped ZnO/Montmorillonite Nanocomposite for Degradation of Malachite Green

2015 ◽  
Vol 827 ◽  
pp. 19-24 ◽  
Author(s):  
Nur Afifah ◽  
Nadia Febiana Djaja ◽  
Rosari Saleh
Keyword(s):  
Photocatalytic Activity ◽  
Malachite Green ◽  
Organic Dyes ◽  
Uv Light ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Spin Resonance ◽  
Doped Zno ◽  
Co Precipitation

In this study, the photocatalytic activity of pure Fe- doped ZnO and Fe- doped ZnO/Montmorillonite nanocomposite has been investigated for the degradation of malachite green under UV light irradiation. Both photocatalysts were synthesized using co-precipitation method and characterized by X-ray diffraction, energy dispersive X-ray spectroscopy, Fourier-transform infrared absorption, and electron spin resonance. The results showed that the photocatalytic efficiency is better in the presence of montmorillonite compared to pure Fe- doped ZnO. To detect the possible reactive species involved in degradation of organic dyes control experiments with introducing scavengers into the solution of organic dyes were carried out. It is found that electron plays an important role in the degradation of malachite green.

Template Induced Synthesis of Nano-Hydroxyapatite by Co-Precipitation Method

2011 ◽  
Vol 311-313 ◽  
pp. 1713-1716 ◽  
Author(s):  
Yan Rong Sun ◽  
Tao Fan ◽  
Chang An Wang ◽  
Li Guo Ma ◽  
Feng Liu
Keyword(s):  
Electron Microscope ◽  
Chondroitin Sulfate ◽  
Aspartic Acid ◽  
Transmission Electron Microscope ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Transmission Electron ◽  
Co Precipitation

Nano-hydroxyapatite with different morphology was synthesized by the co-precipitation method coupled with biomineralization using Ca(NO3)2•4H2O and (NH4)2HPO4 as reagents, adding chondroitin sulfate, agarose and aspartic acid as template. The structure and morphology of the prepared powders were characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM).

Synthesis of Silica Modified Large-Sized Hydroxyapatite Whiskers by a Hydrothermal Co-Precipitation Method

2015 ◽  
Vol 645-646 ◽  
pp. 1339-1344 ◽  
Author(s):  
Yan Ting Yin ◽  
Qing Hua Chen ◽  
Ting Ting Yan ◽  
Qing Hua Chen
Keyword(s):  
Bone Repair ◽  
Ethanol Solution ◽  
Morphological Properties ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
New Type ◽  
Ft Ir ◽  
Co Precipitation ◽  
Surface Modified

The objective of this study was to develop a novel silica modified large-sized hydroxyapatite whiskers with improved properties for use in bone repair applications. Large-sized whiskers with a mean length of 250μm were obtained by a hydrothermal co-precipitation method at 150°C, 7.5Mpa in high-pressure reactor. Silica modified hydroxyapatite whiskers were prepared by dissolving TEOS in ethanol solution, then sintering with hydroxyapatite. The compositional and morphological properties of prepared whiskers were studied by means of x-ray diffraction (XRD), Fouier transform infrared (FT-IR), scanning electron microscopy (SEM). The results indicated the evidence of nanosilicon dioxide particles on the surface of HAP whiskers. The size of nanosilicon dioxide particles depends on dropping and stirring rate. Hence, this new type of silica modified large-sized hydroxyapatite whiskers is a valuable candidate for biomedical applications.Key words: hydroxyapatite, hydrothermal co-precipitation, surface modified, whiskers

scholarly journals Photocatalytic Degradation of Alizarin Red-S by Fe-Co Nanoparticles Prepared By Chemical Co-precipitation Method

2015 ◽  
Vol 11 (9) ◽  
pp. 3950-3958 ◽  
Author(s):  
Chandrakant Vedu Nandre ◽  
C.P. Sawant
Keyword(s):  
Photocatalytic Degradation ◽  
Contact Time ◽  
Oxygen Demand ◽  
Kinetic Studies ◽  
Water Soluble ◽  
Precipitation Method ◽  
Alizarin Red ◽  
Co Nanoparticles ◽  
Co Precipitation ◽  
Red Dye

In the present study photocatalytic degradation of hazardous water soluble alizarin red dye by using Fe-Co nanoparticles  has been investigated. Fe-Co nanoparticles was synthesized by chemical co-precipitation method and characterized by TEM, SEM, EDAX and XRD. The photocatalytic degradation have been studied with the help of variety of parameters such as catalytic dose, dye concentration, pH, contact time and most important chemical oxygen demand. It was observed that The photocatalytic degradation of alizarin red dye by using Fe-Co nanoparticles was an effective ,economic, ecofriendly and faster mode of removing dye from an aqueous solution. The optimum condition for the degradation of the dye was 50 mg/L,pH 8.0, catalyst dose 60 mg/L and contact time 60 minutes. The kinetic studies also have been studied.

Sign in / Sign up

Export Citation Format

Share Document