Influence of heat treatment on corrosion resistance of explosive welding 316L stainless steel composite plate

2019 ◽  
Vol 6 (10) ◽  
pp. 106575
Author(s):  
Bin Wang ◽  
Ming-Yan Jiang ◽  
Ming Xu ◽  
Cheng-Wu Cui ◽  
Jie Wang ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Composite Plate ◽  
Explosive Welding ◽  
316L Stainless Steel ◽  
Steel Composite

Preparation and properties of in-situ grown Cr2O3 diffusion barrier between Ni coating and 316L stainless steel in molten fluorides

CORROSION ◽  
10.5006/3759 ◽  
2021 ◽  
Author(s):  
Yanli Wang ◽  
Ping Wang ◽  
Changxuan Wang ◽  
Shenghua Zhang
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Diffusion Barrier ◽  
Transition Layer ◽  
316L Stainless Steel ◽  
Good Protection ◽  
Molten Fluorides

A Cr2O3 diffusion barrier was in-situ formed between Ni coating and 316L through electroplating a Ni(NiO) transition layer firstly and then annealing at 900 °C for 8 h in Ar. The obtained Cr2O3 is dense, continuously grown and well-bonded with 316L. The diffusion and corrosion resistance of Ni coating with and without Cr2O3 diffusion barrier were investigated. No visible outer diffusion of elements was found during the heat treatment at 750 °C for 150 h and the Ni coating with a Cr2O3 diffusion barrier can provide a good protection for 316L in molten (Li,Na,K)F.

scholarly journals Enhanced Corrosion Resistance of Additively Manufactured 316L Stainless Steel After Heat Treatment

2020 ◽  
Vol 167 (14) ◽  
pp. 141504
Author(s):  
Chengshuang Zhou ◽  
Jing Wang ◽  
Shiyin Hu ◽  
Huimin Tao ◽  
Bei Fang ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
316L Stainless Steel

scholarly journals The Effect of Niobium Addition on Mechanical Properties and Corrosion Resistance of a Medical Grade SS316L

2021 ◽  
Vol 21 (2) ◽  
pp. 178
Author(s):  
I Nyoman Jujur ◽  
Sri Endah Susilowati ◽  
Seto Roseno ◽  
Agus Hadi Santosa Wargadipura
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
316L Stainless Steel ◽  
Raw Materials ◽  
Melting Furnace ◽  
Induction Melting ◽  
Before And After ◽  
Medical Grade

To improve mechanical properties, especially elongation, of as-cast medical grade 316L stainless steel, niobium (Nb) was introduced into the alloys, followed by solution heat treatment. Alloying was performed using a 250 kg air induction melting furnace with duplex raw materials and ferronickel. Heat treatment using a solution at 1040 oC, with a holding time of 45 minutes, and water quenching was used. The sample was tested using hardness and ultimate tensile machines. Corrosion tests with simulated body fluids were carried out using media with similar corrosion conditions to human blood. Microstructure observations were performed optically. The results show that the addition of Nb increases the hardness of medical grade 316L stainless steel by 6% compared to the unalloyed steel, both before and after heat treatment. The addition of Nb increases the tensile strength by 8% compared to non-heat treated steel and increases the elongation before and after heat treatment by 8% and 5%, respectively. However, the corrosion rate of the material with Nb is higher than without the addition of Nb. Nb as a carbide former improves the mechanical properties of medical grade 316L stainless steel but adversely affects its corrosion resistance

BIODUR 316LS

Alloy Digest ◽  
1995 ◽  
Vol 44 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
316L Stainless Steel ◽  
Heat Treating ◽  
Vacuum Arc ◽  
Improve Corrosion Resistance ◽  
Type 316L ◽  
Type 316L Stainless Steel

Abstract BioDur 316LS stainless steel is a modified version of Type 316L stainless steel to improve corrosion resistance for surgical implant applications. The alloy is vacuum arc remelted. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-596. Producer or source: Carpenter.

ENDURAMET 316LN

Alloy Digest ◽  
2015 ◽  
Vol 64 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
316L Stainless Steel ◽  
Heat Treating ◽  
Type 316L ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Type 316L Stainless Steel

Abstract EnduraMet 316LN stainless is a nitrogen strengthened version of Type 316L stainless steel. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1219. Producer or source: Carpenter Technology Corporation.

ALLEGHENY METAL 350

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance

Abstract ALLEGHENY METAL 350 is a chromium-nickel-molybdenum stainless steel developed to bridge the gap between the 300 and 400 series. It can be hardened by heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-29. Producer or source: Allegheny Ludlum Corporation. Originally published May 1955, revised June 1963.

Design of Electric Control System of Stainless Steel Composite Plate

2013 ◽  
Vol 706-708 ◽  
pp. 716-719
Author(s):  
Jian Chu ◽  
Gang Wang
Keyword(s):  
Stainless Steel ◽  
Control System ◽  
Composite Plate ◽  
Current Control ◽  
Equipment Operation ◽  
Electric Control ◽  
Control Scheme ◽  
Steel Composite ◽  
Machine Interface ◽  
Electrical Components

This paper mainly introduced to the PLC as the core of stainless steel composite plate electric control part of the design. The system uses the converter +PLC+ man-machine interface, as the major part of roll welding machine control, because of the use of the PLC, so that the system can improve the automatic level, electrical components is reduced, reduce failure rate, improve the reliability of equipment operation. Based on the current control and speed control, so that the welding quality and welding speed has been greatly improved. In the article, mainly from the production process, and the control system hardware and software design, and the control scheme to introduce several aspects.

Sign in / Sign up

Export Citation Format

Share Document