Self-Assembling Peptide Nanofibers Coupled with Neuropeptide Substance P for Bone Tissue Engineering

The study of nanocrystalline calcium phosphate physical-chemical characteristics and, thereafter, the possibility to imitate bone mineral for the development of new advanced biomaterials is constantly growing. The availability to use synthetic biomimetic hydroxylapatites (HA), since they are the most important inorganic constituents of hard tissues in vertebrates, represents a great turning point in bone tissue engineering because of their chemical similarity to the biological mineral component. The ability to control the architecture and strength of a bone tissue engineering scaffold is critical to achieve a harmony between the scaffold and the host tissue. The scaffold attempts to mimic the function of the natural extracellular matrix, providing a temporary template for the growth of target tissues. Scaffolds should have suitable architecture and strength to serve their intended function. Rapid prototyping (RP) technique is applied to tissue engineering to satisfy this need and to create a scaffold with fully interconnected pore structure directly from the scanned and digitized image of the defect site. In this study, we developed a biomimetic mineralized collagen/Polycaprolactone composite by self-assembling process of collagen fibers and nucleation of a nanostructured HA mimicking the natural bone. This new solution provides a hybrid material, based on natural components of bone (collagen and HA) and the support of the widely-tested PCL (polycaprolactone) giving the scaffolds ideal characteristics such as resorption, biocompatibility and 3-D printability. CAD design of the microstructure and bioprinting fulfills the need to finely control the scaffold’s shape to best fit the anatomical defect, the possibility of customization and the ability to perfectly control spatial distribution of pores and their morphology. The results allowed the conclusion that these scaffolds are biocompatible and allow the colonization and proliferation of MSC (mesenchymal stem cell). The in vivo results confirm the scaffold’s biocompatibility and its composition and structure create the basis for bone tissue regeneration.

Download Full-text

HYDROXYAPATITE, ALGINATE, AND CHITOSAN FOR BONE SCAFFOLDS: SPECTROSCOPY STUDY

Dentika Dental Journal ◽

10.32734/dentika.v19i2.457 ◽

2016 ◽

Vol 19 (2) ◽

pp. 93-100

Author(s):

Lalita El Milla

Keyword(s):

Tissue Engineering ◽

Bone Tissue Engineering ◽

Bone Tissue ◽

Functional Groups ◽

Bone Growth ◽

Three Dimensional ◽

Dimensional Structure ◽

Tissue Engineering Scaffolds ◽

Hydroxyapatite Powder ◽

Materials Used

Scaffolds is three dimensional structure that serves as a framework for bone growth. Natural materials are often used in synthesis of bone tissue engineering scaffolds with respect to compliance with the content of the human body. Among the materials used to make scafffold was hydroxyapatite, alginate and chitosan. Hydroxyapatite powder obtained by mixing phosphoric acid and calcium hydroxide, alginate powders extracted from brown algae and chitosan powder acetylated from crab. The purpose of this study was to examine the functional groups of hydroxyapatite, alginate and chitosan. The method used in this study was laboratory experimental using Fourier Transform Infrared (FTIR) spectroscopy for hydroxyapatite, alginate and chitosan powders. The results indicated the presence of functional groups PO43-, O-H and CO32- in hydroxyapatite. In alginate there were O-H, C=O, COOH and C-O-C functional groups, whereas in chitosan there were O-H, N-H, C=O, C-N, and C-O-C. It was concluded that the third material containing functional groups as found in humans that correspond to the scaffolds material in bone tissue engineering.

Download Full-text

PLGA+HA/βTCP scaffold incorporating simvastatin: a promising biomaterial for bone tissue engineering

Journal of Oral Implantology ◽

10.1563/aaid-joi-d-19-00148 ◽

2020 ◽

Author(s):

Mariane Beatriz Sordi ◽

Ariadne Cristiane Cabral da Cruz ◽

Águedo Aragones ◽

Mabel Mariela Rodríguez Cordeiro ◽

Ricardo de Souza Magini

Keyword(s):

Tissue Engineering ◽

Bone Tissue Engineering ◽

Bone Tissue ◽

Thermal Analyses ◽

Chemical Properties ◽

Biological Properties ◽

Scanning Calorimetry ◽

Evaporation Technique ◽

Porosity Analysis ◽

Biphasic Ceramic

The aim of this study was to synthesize, characterize, and evaluate degradation and biocompatibility of poly(lactic-co-glycolic acid) + hydroxyapatite / β-tricalcium phosphate (PLGA+HA/βTCP) scaffolds incorporating simvastatin (SIM) to verify if this biomaterial might be promising for bone tissue engineering. Samples were obtained by the solvent evaporation technique. Biphasic ceramic particles (70% HA, 30% βTCP) were added to PLGA in a ratio of 1:1. Samples with SIM received 1% (m:m) of this medication. Scaffolds were synthesized in a cylindric-shape and sterilized by ethylene oxide. For degradation analysis, samples were immersed in PBS at 37 °C under constant stirring for 7, 14, 21, and 28 days. Non-degraded samples were taken as reference. Mass variation, scanning electron microscopy, porosity analysis, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetry were performed to evaluate physico-chemical properties. Wettability and cytotoxicity tests were conducted to evaluate the biocompatibility. Microscopic images revealed the presence of macro, meso, and micropores in the polymer structure with HA/βTCP particles homogeneously dispersed. Chemical and thermal analyses presented very similar results for both PLGA+HA/βTCP and PLGA+HA/βTCP+SIM. The incorporation of simvastatin improved the hydrophilicity of scaffolds. Additionally, PLGA+HA/βTCP and PLGA+HA/βTCP+SIM scaffolds were biocompatible for osteoblasts and mesenchymal stem cells. In summary, PLGA+HA/βTCP scaffolds incorporating simvastatin presented adequate structural, chemical, thermal, and biological properties for bone tissue engineering.

Download Full-text