scholarly journals Direct measurement of the strength of microtubule attachment to yeast centrosomes

2017 ◽  
Vol 28 (14) ◽  
pp. 1853-1861 ◽  
Author(s):  
Kimberly K. Fong ◽  
Krishna K. Sarangapani ◽  
Erik C. Yusko ◽  
Michael Riffle ◽  
Aida Llauró ◽  
...  
Keyword(s):  
High Strength ◽  
Spindle Pole ◽  
Spindle Positioning ◽  
Calmodulin Binding ◽  
Microtubule Attachment ◽  
Spindle Pole Bodies ◽  
Tensile Forces ◽  
Mitotic Spindle Assembly

Centrosomes, or spindle pole bodies (SPBs) in yeast, are vital mechanical hubs that maintain load-bearing attachments to microtubules during mitotic spindle assembly, spindle positioning, and chromosome segregation. However, the strength of microtubule-centrosome attachments is unknown, and the possibility that mechanical force might regulate centrosome function has scarcely been explored. To uncover how centrosomes sustain and regulate force, we purified SPBs from budding yeast and used laser trapping to manipulate single attached microtubules in vitro. Our experiments reveal that SPB–microtubule attachments are extraordinarily strong, rupturing at forces approximately fourfold higher than kinetochore attachments under identical loading conditions. Furthermore, removal of the calmodulin-binding site from the SPB component Spc110 weakens SPB–microtubule attachment in vitro and sensitizes cells to increased SPB stress in vivo. These observations show that calmodulin binding contributes to SPB mechanical integrity and suggest that its removal may cause pole delamination and mitotic failure when spindle forces are elevated. We propose that the very high strength of SPB–microtubule attachments may be important for spindle integrity in mitotic cells so that tensile forces generated at kinetochores do not cause microtubule detachment and delamination at SPBs.

scholarly journals Nucleation of microtubules in vitro by isolated spindle pole bodies of the yeast Saccharomyces cerevisiae.

1978 ◽  
Vol 78 (2) ◽  
pp. 401-414 ◽  
Author(s):  
J S Hyams ◽  
G G Borisy
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Spindle Pole ◽  
Yeast Saccharomyces Cerevisiae ◽  
Microtubule Attachment ◽  
Spindle Pole Bodies ◽  
Attachment Sites ◽  
Air Water Interface ◽  
Microtubule Growth

Spindle pole bodies (SPBs) were isolated from the yeast Saccharomyces cerevisiae by an adaptation of the Kleinschmidt monolayer technique. Spheroplasts prepared from the cells were lysed on an air-water interface. Spread preparations were picked up on grids, transferred to experimental test solutions, and prepared for whole-mount electron microscopy. Using purified exogenous tubulin from porcine brain tissue, the isolated SPBs were shown to nucleate the assembly of microtubules in vitro. Microtubule growth was directional and primarily onto the intranuclear face of the SPB. Neither the morphology nor the microtubule-initiating capacity of the SPB was affected by treatment with the enzymes DNase, RNase, or phospholipase although both properties were sensitive to trypsin. Analysis of SPBs at various stages of the cell cycle showed that newly replicated SPBs had the capacity to nucleate microtubules. SPBs isolated from exponentially growing cells initiated a subset of the yeast spindle microtubules equivalent to the number of pole-to-pole microtubules seen in vivo. However, SPBs isolated from cells in stationary phase and therefore arrested in G1 nucleated a number of microtubules equal to the total chromosomal and pole-to-pole tubules in the yeast spindle. This may mean that in G1-arrested cells, the SPB is associated with microtubule attachment sites of the yeast chromatin.

The role of spindle pole bodies and modified microtubule ends in the initiation of microtubule assembly in Saccharomyces cerevisiae

1978 ◽  
Vol 30 (1) ◽  
pp. 331-352 ◽  
Author(s):  
B. Byers ◽  
K. Shriver ◽  
L. Goetsch
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Spindle Pole ◽  
Microtubule Assembly ◽  
Structural Differentiation ◽  
Yeast Saccharomyces Cerevisiae ◽  
Microtubule Polymerization ◽  
Spindle Pole Bodies ◽  
Osmotic Lysis

The spindle poles of the budding yeast, Saccharomyces cerevisiae, have been removed from mitotic and meiotic cells by osmotic lysis of spheroplasts. The spindle pole bodies (SPBs)—diskoidal structures also termed ‘spindle plaques’—have been analysed for their ability to potentiate the polymerization of microtubules in vitro. Free SPBs were completely deprived of any detectable native microtubules by incubation in the absence of added tubulin and were then challenged with chick neurotubulin, which had been rendered partially defective in self-initiation of repolymerization. Electron microscopy revealed that these SPBs served as foci for the initiation of microtubule polymerization in vitro. Because the attached microtubules elongated linearly with time but did not increase in numbers after the first stage of the reaction, it is apparent that there are a limited number of sites for initiation. The initiating potential of the SPBs was found to be inhibited by enzymic hydrolysis of protein but not of DNA. The microtubule end proximal to the site of initiation on the SPB is distinguished by a ‘closed’ appearance because of a terminal component which is continuous with the microtubule wall, whereas the distal end has the ‘open’ appearance characteristic of freely repolymerized neurotubules. SPBs which were partially purified on sucrose gradients retained their ability to initiate the assembly of microtubules with the same structural differentiation of their ends. The occurrence of closed proximal ends on native yeast microtubules suggests that closed ends may play a role in the initiation of microtubule polymerization in vivo, as well as in vitro.

scholarly journals Cytoplasmic dynein and actin-related protein Arp1 are required for normal nuclear distribution in filamentous fungi.

1994 ◽  
Vol 127 (1) ◽  
pp. 139-149 ◽  
Author(s):  
M Plamann ◽  
P F Minke ◽  
J H Tinsley ◽  
K S Bruno
Keyword(s):  
Cytoplasmic Dynein ◽  
Spindle Pole ◽  
Related Protein ◽  
Nuclear Distribution ◽  
Spindle Pole Bodies ◽  
Fungal Hyphae ◽  
Genes Encoding ◽  
Dynactin Complex

Cytoplasmic dynein is a multisubunit, microtubule-dependent mechanochemical enzyme that has been proposed to function in a variety of intracellular movements, including minus-end-directed transport of organelles. Dynein-mediated vesicle transport is stimulated in vitro by addition of the Glued/dynactin complex raising the possibility that these two complexes interact in vivo. We report here that a class of phenotypically identical mutants of the filamentous fungus Neurospora crassa are defective in genes encoding subunits of either cytoplasmic dynein or the Glued/dynactin complex. These mutants, defined as ropy, have curled hyphae with abnormal nuclear distribution. ro-1 encodes the heavy chain of cytoplasmic dynein, while ro-4 encodes an actin-related protein that is a probable homologue of the actin-related protein Arpl (formerly referred to as actin-RPV or centractin), the major component of the glued/dynactin complex. The phenotypes of ro-1 and ro-4 mutants suggest that cytoplasmic dynein, as well as the Glued/dynactin complex, are required to maintain uniform nuclear distribution in fungal hyphae. We propose that cytoplasmic dynein maintains nuclear distribution through sliding of antiparallel microtubules emanating from neighboring spindle pole bodies.

scholarly journals Structure and function of Spc42 coiled-coils in yeast centrosome assembly and duplication

2019 ◽  
Vol 30 (12) ◽  
pp. 1505-1522 ◽  
Author(s):  
Amanda C. Drennan ◽  
Shivaani Krishna ◽  
Mark A. Seeger ◽  
Michael P. Andreas ◽  
Jennifer M. Gardner ◽  
...  
Keyword(s):  
Coiled Coil ◽  
Core Layer ◽  
Spindle Pole ◽  
Coiled Coils ◽  
Lipid Monolayer ◽  
Functional Roles ◽  
Spindle Pole Bodies ◽  
And Function

Centrosomes and spindle pole bodies (SPBs) are membraneless organelles whose duplication and assembly is necessary for bipolar mitotic spindle formation. The structural organization and functional roles of major proteins in these organelles can provide critical insights into cell division control. Spc42, a phosphoregulated protein with an N-terminal dimeric coiled-coil (DCC), assembles into a hexameric array at the budding yeast SPB core, where it functions as a scaffold for SPB assembly. Here, we present in vitro and in vivo data to elucidate the structural arrangement and biological roles of Spc42 elements. Crystal structures reveal details of two additional coiled-coils in Spc42: a central trimeric coiled-coil and a C-terminal antiparallel DCC. Contributions of the three Spc42 coiled-coils and adjacent undetermined regions to the formation of an ∼145 Å hexameric lattice in an in vitro lipid monolayer assay and to SPB duplication and assembly in vivo reveal structural and functional redundancy in Spc42 assembly. We propose an updated model that incorporates the inherent symmetry of these Spc42 elements into a lattice, and thereby establishes the observed sixfold symmetry. The implications of this model for the organization of the central SPB core layer are discussed.

scholarly journals Identification of circRNA circ-CSPP1 as a potent driver of colorectal cancer by directly targeting the miR-431/LASP1 axis

2021 ◽  
Vol 16 (1) ◽  
pp. 523-536
Author(s):  
Minghao Li ◽  
Jianbin Zhuang ◽  
Di Kang ◽  
Yuzhuo Chen ◽  
Weiliang Song
Keyword(s):  
Colorectal Cancer ◽  
Cancer Biology ◽  
Spindle Pole ◽  
Circular Rnas ◽  
Cell Progression ◽  
Crc Management ◽  
Common Malignancy

Abstract Colorectal cancer (CRC) is the third most common malignancy worldwide. Circular RNAs (circRNAs) have been implicated in cancer biology. The purpose of the current work is to investigate the precise parts of circRNA centrosome and spindle pole-associated protein 1 (circ-CSPP1) in the progression of CRC. Our data showed that circ-CSPP1 was significantly overexpressed in CRC tissues and cells. The knockdown of circ-CSPP1 attenuated cell proliferation, migration, invasion and promoted apoptosis in vitro and weakened tumor growth in vivo. circ-CSPP1 directly targeted miR-431, and circ-CSPP1 knockdown modulated CRC cell progression in vitro via upregulating miR-431. Moreover, LIM and SH3 protein 1 (LASP1) was a functional target of miR-431 in modulating CRC cell malignant progression. Furthermore, circ-CSPP1 in CRC cells functioned as a posttranscriptional regulator on LASP1 expression by targeting miR-431. Our present study identified the oncogenic role of circ-CSPP1 in CRC partially by the modulation of the miR-431/LASP1 axis, providing evidence for circ-CSPP1 as a promising biomarker for CRC management.

Abstract 37: Nrip Deficiency Leads to Dilated Cardiomyopathy

2015 ◽  
Vol 117 (suppl_1) ◽  
Author(s):  
Show-Li Chen
Keyword(s):  
Calcium Transient ◽  
Receptor Interaction ◽  
Cell Width ◽  
Interacting Protein ◽  
Cardiac Tissues ◽  
Calmodulin Binding ◽  
Calcineurin Phosphatase ◽  
And Function

Previously, we demonstrate a gene, nuclear receptor interaction protein (NRIP, also named DCAF6 or IQWD1) as a Ca2+- dependent calmodulin binding protein that can activate calcineurin phosphatase activity. Here, we found that α-actinin-2 (ACTN2), is one of NRIP-interacting proteins from the yeast two-hybrid system using NRIP as a prey. We further confirmed the direct bound between NRIP and ACTN2 using in vitro protein-protein interaction and in vivo co-immunoprecipitation assays. To further map the binding domain of each protein, the results showed the IQ domain of NRIP responsible for ACTN2 binding, and EF hand motif of ACTN2 responsible for NRIP bound. Due to ACTN2 is a biomarker of muscular Z-disc complex; we found the co-localization of NRIP and ACTN2 in cardiac tissues by immunofluorescence assays. Taken together, NRIP is a novel ACTN2-interacting protein. To investigate insights into in vivo function of NRIP, we generated conventional NRIP-null mice. The H&E staining results are shown in the hearts of NRIP KO mice are enlarged and dilated and the cell width of NRIP KO cardiomyocyte is increased. The EM of NRIP KO heart muscles reveal the reduction of I-band width and extension length of Z-disc in sarcomere structure; and the echocardiography shows the diminished fractional shortening in heart functions. Additionally, the calcium transient and sarcomere contraction length in cardiomyocytes of NRIP KO is weaker and shorter than wt; respectively. In conclusion, NRIP is a novel Z-disc protein and has function for maintenance of sarcomere integrity structure and function for calcium transient and muscle contraction.

Effects of multiscale porosity and pore interconnectivity on in vitro and in vivo degradation and biocompatibility of Fe-Mn-Cu scaffold

2021 ◽  
Author(s):  
Santanu Mandal ◽  
Viraj Rathod ◽  
Samit Kumar Nandi ◽  
Mangal Roy
Keyword(s):  
High Strength ◽  
Pore Interconnectivity ◽  
In Vivo Degradation

Iron (Fe) based scaffolds are promising candidates as degradable metallic scaffolds. High strength and ability to control the degradation with tailormade composition and porosity are specific advantages of these scaffolds....

UV Activated Copolymerization Coatings of Urethane Acrylates for Use in the Cosmetic Industry

2021 ◽  
Author(s):  
◽  
Zane Grigale-Soročina
Keyword(s):  
Color Constancy ◽  
Surface Hardness ◽  
High Strength ◽  
Polymerization Process ◽  
Component Selection ◽  
Materials Used ◽  
Pigmented Coatings

In the dissertation compositions of urethane diacrylates and monoacrylates have been studied, which when curing under the conditions of UV-activated copolymerization process meeting the requirements of cosmetic varnishes, form cross-linked structure coatings with high strength-deformation, surface hardness, surface light reflectance, adhesion and other parameters. The review of the literature summarizes information on the types of natural nail coatings and the basic components entering them. Restrictions on the choice of basic components entering the system are described. The effect of conditions and components on the natural nail is described. The materials used in the research are described in the methodological part of the work. The process of obtaining compositions is described. The research methods used are described: characterization of rheological properties of non-polymerized compositions, differential thermal analysis of polymerization process, determination of polymerization depth, determination of crosslinked part of polymerized systems, determination of yield tensile strength-deformation, coating surface hardness, surface gloss and surface wear, assessment of adhesion and its durability, in-vitro and in-vivo coating adhesion studies on natural nails, spectroscopic analysis of pigmented coatings and assessment of color constancy, comparison of coating compositions in terms of their functionality and effects on human health. In the experimental part of the work, methodologies for component selection, composite system formation and obtaining appropriate coatings have been developed. A methodology has been developed for the evaluation of the set of structures and properties of the obtained coatings. The influence of the chemical nature and content ratios of urethane diacrylates and monoacrylates suitable for the formation of separate cosmetic coatings on the indicators of cross-linked structures formed in the process of UV-activated copolymerization and the corresponding indicators of coating properties has been studied. The influence of individual additives on the properties of cross-linked coatings, their adhesion to the surface and the durability of the coating at removal process has been evaluated.

scholarly journals Dynactin Is Required for Microtubule Anchoring at Centrosomes

1999 ◽  
Vol 147 (2) ◽  
pp. 321-334 ◽  
Author(s):  
N.J. Quintyne ◽  
S.R. Gill ◽  
D.M. Eckley ◽  
C.L. Crego ◽  
D.A. Compton ◽  
...  
Keyword(s):  
Mitotic Cell ◽  
Cytoplasmic Dynein ◽  
Microtubule Organization ◽  
Cultured Fibroblasts ◽  
Cell Extracts ◽  
Dynein Motor ◽  
Mitotic Spindle Assembly ◽  
Dynactin Complex

The multiprotein complex, dynactin, is an integral part of the cytoplasmic dynein motor and is required for dynein-based motility in vitro and in vivo. In living cells, perturbation of the dynein–dynactin interaction profoundly blocks mitotic spindle assembly, and inhibition or depletion of dynein or dynactin from meiotic or mitotic cell extracts prevents microtubules from focusing into spindles. In interphase cells, perturbation of the dynein–dynactin complex is correlated with an inhibition of ER-to-Golgi movement and reorganization of the Golgi apparatus and the endosome–lysosome system, but the effects on microtubule organization have not previously been defined. To explore this question, we overexpressed a variety of dynactin subunits in cultured fibroblasts. Subunits implicated in dynein binding have effects on both microtubule organization and centrosome integrity. Microtubules are reorganized into unfocused arrays. The pericentriolar components, γ tubulin and dynactin, are lost from centrosomes, but pericentrin localization persists. Microtubule nucleation from centrosomes proceeds relatively normally, but microtubules become disorganized soon thereafter. Overexpression of some, but not all, dynactin subunits also affects endomembrane localization. These data indicate that dynein and dynactin play important roles in microtubule organization at centrosomes in fibroblastic cells and provide new insights into dynactin–cargo interactions.

A high-strength biodegradable thermoset polymer for internal fixation bone screws: Preparation, in vitro and in vivo evaluation

2019 ◽  
Vol 183 ◽  
pp. 110445
Author(s):  
Mingle Cai ◽  
Haoming Liu ◽  
Yuqing Jiang ◽  
Jianglin Wang ◽  
Shengmin Zhang
Keyword(s):  
Internal Fixation ◽  
High Strength ◽  
Bone Screws ◽  
In Vivo Evaluation ◽  
Thermoset Polymer
Sign in / Sign up

Export Citation Format

Share Document