scholarly journals A node organization in the actomyosin contractile ring generates tension and aids stability

2017 ◽  
Vol 28 (23) ◽  
pp. 3286-3297 ◽  
Author(s):  
Sathish Thiyagarajan ◽  
Shuyuan Wang ◽  
Ben O’Shaughnessy
Keyword(s):  
Mathematical Model ◽  
Plasma Membrane ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Microscopy Study ◽  
Coarse Grained ◽  
Contractile Ring ◽  
Superresolution Microscopy

During cytokinesis, a contractile actomyosin ring constricts and divides the cell in two. How the ring marshals actomyosin forces to generate tension is not settled. Recently, a superresolution microscopy study of the fission yeast ring revealed that myosins and formins that nucleate actin filaments colocalize in plasma membrane-anchored complexes called nodes in the constricting ring. The nodes move bidirectionally around the ring. Here we construct and analyze a coarse-grained mathematical model of the fission yeast ring to explore essential consequences of the recently discovered ring ultrastructure. The model reproduces experimentally measured values of ring tension, explains why nodes move bidirectionally, and shows that tension is generated by myosin pulling on barbed-end-anchored actin filaments in a stochastic sliding-filament mechanism. This mechanism is not based on an ordered sarcomeric organization. We show that the ring is vulnerable to intrinsic contractile instabilities, and protection from these instabilities and organizational homeostasis require both component turnover and anchoring of components to the plasma membrane.

scholarly journals Assembly and architecture of precursor nodes during fission yeast cytokinesis

2011 ◽  
Vol 192 (6) ◽  
pp. 1005-1021 ◽  
Author(s):  
Damien Laporte ◽  
Valerie C. Coffman ◽  
I-Ju Lee ◽  
Jian-Qiu Wu
Keyword(s):  
Plasma Membrane ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Myosin Ii ◽  
Stable Node ◽  
Animal Cells ◽  
Contractile Ring ◽  
Cell Interior ◽  
Ring Assembly ◽  
Positional Marker

The contractile ring is essential for cytokinesis in most fungal and animal cells. In fission yeast, cytokinesis nodes are precursors of the contractile ring and mark the future cleavage site. However, their assembly and architecture have not been well described. We found that nodes are assembled stoichiometrically in a hierarchical order with two modules linked by the positional marker anillin Mid1. Mid1 first recruits Cdc4 and IQGAP Rng2 to form module I. Rng2 subsequently recruits the myosin-II subunits Myo2 and Rlc1. Mid1 then independently recruits the F-BAR protein Cdc15 to form module II. Mid1, Rng2, Cdc4, and Cdc15 are stable node components that accumulate close to the plasma membrane. Both modules recruit the formin Cdc12 to nucleate actin filaments. Myo2 heads point into the cell interior, where they efficiently capture actin filaments to condense nodes into the contractile ring. Collectively, our work characterizing the assembly and architecture of precursor nodes defines important steps and molecular players for contractile ring assembly.

scholarly journals Anchoring of actin to the plasma membrane enables tension production in the fission yeast cytokinetic ring

2019 ◽  
Vol 30 (16) ◽  
pp. 2053-2064 ◽  
Author(s):  
Shuyuan Wang ◽  
Ben O’Shaughnessy
Keyword(s):  
Plasma Membrane ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Tensile Force ◽  
Myosin Ii ◽  
Quantitative Evidence ◽  
Explicit Simulation ◽  
Adjacent Segments ◽  
Develop Tension

The cytokinetic ring generates tensile force that drives cell division, but how tension emerges from the relatively disordered ring organization remains unclear. Long ago, a musclelike sliding filament mechanism was proposed, but evidence for sarcomeric order is lacking. Here we present quantitative evidence that in fission yeast, ring tension originates from barbed-end anchoring of actin filaments to the plasma membrane, providing resistance to myosin forces that enables filaments to develop tension. The role of anchoring was highlighted by experiments on isolated fission yeast rings, where sections of ring became unanchored from the membrane and shortened ∼30-fold faster than normal. The dramatically elevated constriction rates are unexplained. Here we present a molecularly explicit simulation of constricting partially anchored rings as studied in these experiments. Simulations accurately reproduced the experimental constriction rates and showed that following anchor release, a segment becomes tensionless and shortens via a novel noncontractile reeling-in mechanism at about the velocity of load-free myosin II. The ends are reeled in by barbed end–anchored actin filaments in adjacent segments. Other actin anchoring schemes failed to constrict rings. Our results quantitatively support a specific organization and anchoring scheme that generate tension in the cytokinetic ring.

scholarly journals The F-actin bundler α-actinin Ain1 is tailored for ring assembly and constriction during cytokinesis in fission yeast

2016 ◽  
Vol 27 (11) ◽  
pp. 1821-1833 ◽  
Author(s):  
Yujie Li ◽  
Jenna R. Christensen ◽  
Kaitlin E. Homa ◽  
Glen M. Hocky ◽  
Alice Fok ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Actin Filament ◽  
Actin Filaments ◽  
Biochemical Properties ◽  
Ring Formation ◽  
Cross Linking ◽  
Contractile Ring ◽  
Mixed Polarity ◽  
Dividing Cells

The actomyosin contractile ring is a network of cross-linked actin filaments that facilitates cytokinesis in dividing cells. Contractile ring formation has been well characterized in Schizosaccharomyces pombe, in which the cross-linking protein α-actinin SpAin1 bundles the actin filament network. However, the specific biochemical properties of SpAin1 and whether they are tailored for cytokinesis are not known. Therefore we purified SpAin1 and quantified its ability to dynamically bind and bundle actin filaments in vitro using a combination of bulk sedimentation assays and direct visualization by two-color total internal reflection fluorescence microscopy. We found that, while SpAin1 bundles actin filaments of mixed polarity like other α-actinins, SpAin1 has lower bundling activity and is more dynamic than human α-actinin HsACTN4. To determine whether dynamic bundling is important for cytokinesis in fission yeast, we created the less dynamic bundling mutant SpAin1(R216E). We found that dynamic bundling is critical for cytokinesis, as cells expressing SpAin1(R216E) display disorganized ring material and delays in both ring formation and constriction. Furthermore, computer simulations of initial actin filament elongation and alignment revealed that an intermediate level of cross-linking best facilitates filament alignment. Together our results demonstrate that dynamic bundling by SpAin1 is important for proper contractile ring formation and constriction.

scholarly journals Tropomyosin and Myosin-II Cellular Levels Promote Actomyosin Ring Assembly in Fission Yeast

2010 ◽  
Vol 21 (6) ◽  
pp. 989-1000 ◽  
Author(s):  
Benjamin C. Stark ◽  
Thomas E. Sladewski ◽  
Luther W. Pollard ◽  
Matthew Lord
Keyword(s):  
Motor Activity ◽  
Atpase Activity ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Myosin Ii ◽  
Bound State ◽  
Contractile Ring ◽  
Ring Assembly

Myosin-II (Myo2p) and tropomyosin are essential for contractile ring formation and cytokinesis in fission yeast. Here we used a combination of in vivo and in vitro approaches to understand how these proteins function at contractile rings. We find that ring assembly is delayed in Myo2p motor and tropomyosin mutants, but occurs prematurely in cells engineered to express two copies of myo2. Thus, the timing of ring assembly responds to changes in Myo2p cellular levels and motor activity, and the emergence of tropomyosin-bound actin filaments. Doubling Myo2p levels suppresses defects in ring assembly associated with a tropomyosin mutant, suggesting a role for tropomyosin in maximizing Myo2p function. Correspondingly, tropomyosin increases Myo2p actin affinity and ATPase activity and promotes Myo2p-driven actin filament gliding in motility assays. Tropomyosin achieves this by favoring the strong actin-bound state of Myo2p. This mode of regulation reflects a role for tropomyosin in specifying and stabilizing actomyosin interactions, which facilitates contractile ring assembly in the fission yeast system.

scholarly journals Anchoring of actin to the plasma membrane enables tension production in the fission yeast cytokinetic ring

2019 ◽  
Author(s):  
Shuyuan Wang ◽  
Ben O’Shaughnessy
Keyword(s):  
Plasma Membrane ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Tensile Force ◽  
Myosin Ii ◽  
Quantitative Evidence ◽  
Explicit Simulation ◽  
Adjacent Segments ◽  
Develop Tension

AbstractThe cytokinetic ring generates tensile force that drives cell division, but how tension emerges from the relatively disordered ring organization remains unclear. Long ago a muscle-like sliding filament mechanism was proposed, but evidence for sarcomeric order is lacking. Here we present quantitative evidence that in fission yeast ring tension originates from barbed-end anchoring of actin filaments to the plasma membrane, providing resistance to myosin forces which enables filaments to develop tension. The role of anchoring was highlighted by experiments on isolated fission yeast rings, where sections of ring unanchored from the membrane and shortened ~30-fold faster than normal [Mishra M., et al. (2013) Nat Cell Biol 15(7):853-859]. The dramatically elevated constriction rates are unexplained. Here we present a molecularly explicit simulation of constricting partially anchored rings as studied in these experiments. Simulations accurately reproduced the experimental constriction rates, and showed that following anchor release a segment becomes tensionless and shortens via a novel non-contractile reeling-in mechanism at about the load-free myosin-II velocity. The ends are reeled in by barbed-end-anchored actin filaments in adjacent segments. Other actin anchoring schemes failed to constrict rings. Our results quantitatively support a specific organization and anchoring scheme that generates tension in the cytokinetic ring.

scholarly journals The number of cytokinesis nodes in mitotic fission yeast scales with cell volume

2021 ◽  
Author(s):  
Wasim A Sayyad ◽  
Thomas D Pollard
Keyword(s):  
Plasma Membrane ◽  
Fission Yeast ◽  
Large Population ◽  
Yeast Cells ◽  
Wild Type ◽  
Contractile Ring ◽  
Node Number ◽  
Nmt1 Promoter ◽  
Wide Range ◽  
Mutant Cells

Cytokinesis nodes are assemblies of stoichiometric ratios of proteins associated with the plasma membrane, which serve as precursors for the contractile ring during cytokinesis by fission yeast. The total number of nodes is uncertain, because of the limitations of the methods used previously. Here we used the ~140 nm resolution of Airyscan confocal microscopy to resolve a large population of dim, unitary cytokinesis nodes in 3D reconstructions of whole fission yeast cells. Wild-type fission yeast cells make about 200 unitary cytokinesis nodes. Most, but not all of these nodes condense into a contractile ring. The number of cytokinesis nodes scales with cell size in four strains tested, although wide rga4Δ mutant cells form somewhat fewer cytokinesis nodes than expected from the overall trend. The surface density of Pom1 kinase on the plasma membrane around the equators of cells is similar with a wide range of node numbers, so Pom1 does not control cytokinesis node number. However, varying protein concentrations with the nmt1 promoter showed that the numbers of nodes increase above a baseline of about 200 with the total cellular concentration of either Pom1 or the kinase Cdr2.

scholarly journals Role of Tropomyosin in Formin-mediated Contractile Ring Assembly in Fission Yeast

2009 ◽  
Vol 20 (8) ◽  
pp. 2160-2173 ◽  
Author(s):  
Colleen T. Skau ◽  
Erin M. Neidt ◽  
David R. Kovar
Keyword(s):  
Fission Yeast ◽  
Actin Filament ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Actin Assembly ◽  
Animal Cells ◽  
Contractile Ring ◽  
Direct Role ◽  
Ring Assembly

Like animal cells, fission yeast divides by assembling actin filaments into a contractile ring. In addition to formin Cdc12p and profilin, the single tropomyosin isoform SpTm is required for contractile ring assembly. Cdc12p nucleates actin filaments and remains processively associated with the elongating barbed end while driving the addition of profilin-actin. SpTm is thought to stabilize mature filaments, but it is not known how SpTm localizes to the contractile ring and whether SpTm plays a direct role in Cdc12p-mediated actin polymerization. Using “bulk” and single actin filament assays, we discovered that Cdc12p can recruit SpTm to actin filaments and that SpTm has diverse effects on Cdc12p-mediated actin assembly. On its own, SpTm inhibits actin filament elongation and depolymerization. However, Cdc12p completely overcomes the combined inhibition of actin nucleation and barbed end elongation by profilin and SpTm. Furthermore, SpTm increases the length of Cdc12p-nucleated actin filaments by enhancing the elongation rate twofold and by allowing them to anneal end to end. In contrast, SpTm ultimately turns off Cdc12p-mediated elongation by “trapping” Cdc12p within annealed filaments or by dissociating Cdc12p from the barbed end. Therefore, SpTm makes multiple contributions to contractile ring assembly during and after actin polymerization.

scholarly journals Progress towards understanding the mechanism of cytokinesis in fission yeast

2008 ◽  
Vol 36 (3) ◽  
pp. 425-430 ◽  
Author(s):  
Thomas D. Pollard
Keyword(s):  
Fission Yeast ◽  
Actin Filaments ◽  
Biochemical Analysis ◽  
Fluorescent Proteins ◽  
Myosin Ii ◽  
Live Cells ◽  
Contractile Ring ◽  
Simple Hypothesis ◽  
A Cell ◽  
Temporal And Spatial

We use fission yeast to study the molecular mechanism of cytokinesis. We benefit from a long history in genetic analysis of the cell cycle in fission yeast, which provided the most complete inventory of cytokinesis proteins. We used fluorescence microscopy of proteins tagged with fluorescent proteins to establish the temporal and spatial pathway for the assembly and constriction of the contractile ring. We combined biochemical analysis of purified proteins (myosin-II, profilin, formin Cdc12p and cofilin), observations of fluorescent fusion proteins in live cells and mathematical modelling to formulate and test a simple hypothesis for the assembly of the contractile ring. This model involves the formation of 65 nodes containing myosin-II and formin Cdc12p around the equator of the cell. As a cell enters anaphase, actin filaments grow from formin Cdc12p in these nodes. Myosin captures actin filaments from adjacent nodes and pulls intermittently to condense the nodes into a contractile ring.

scholarly journals The fission yeast cytokinesis formin Cdc12p is a barbed end actin filament capping protein gated by profilin

2003 ◽  
Vol 161 (5) ◽  
pp. 875-887 ◽  
Author(s):  
David R. Kovar ◽  
Jeffrey R. Kuhn ◽  
Andrea L. Tichy ◽  
Thomas D. Pollard
Keyword(s):  
Fission Yeast ◽  
Actin Filaments ◽  
Maximum Yield ◽  
Restrictive Temperature ◽  
Permissive Temperature ◽  
Contractile Ring ◽  
Capping Protein ◽  
Ring Assembly ◽  
End Capping ◽  
Actin Cables

Cytokinesis in most eukaryotes requires the assembly and contraction of a ring of actin filaments and myosin II. The fission yeast Schizosaccharomyces pombe requires the formin Cdc12p and profilin (Cdc3p) early in the assembly of the contractile ring. The proline-rich formin homology (FH) 1 domain binds profilin, and the FH2 domain binds actin. Expression of a construct consisting of the Cdc12 FH1 and FH2 domains complements a conditional mutant of Cdc12 at the restrictive temperature, but arrests cells at the permissive temperature. Cells overexpressing Cdc12(FH1FH2)p stop growing with excessive actin cables but no contractile rings. Like capping protein, purified Cdc12(FH1FH2)p caps the barbed end of actin filaments, preventing subunit addition and dissociation, inhibits end to end annealing of filaments, and nucleates filaments that grow exclusively from their pointed ends. The maximum yield is one filament pointed end per six formin polypeptides. Profilins that bind both actin and poly-l-proline inhibit nucleation by Cdc12(FH1FH2)p, but polymerization of monomeric actin is faster, because the filaments grow from their barbed ends at the same rate as uncapped filaments. On the other hand, Cdc12(FH1FH2)p blocks annealing even in the presence of profilin. Thus, formins are profilin-gated barbed end capping proteins with the ability to initiate actin filaments from actin monomers bound to profilin. These properties explain why contractile ring assembly requires both formin and profilin and why viability depends on the ability of profilin to bind both actin and poly-l-proline.

scholarly journals Superresolution microscopy reveals partial preassembly and subsequent bending of the clathrin coat during endocytosis

2021 ◽  
Author(s):  
Markus Mund ◽  
Aline Tschanz ◽  
Yu-Le Wu ◽  
Felix Frey ◽  
Johanna L. Mehl ◽  
...  
Keyword(s):  
Experimental Data ◽  
Mathematical Model ◽  
Plasma Membrane ◽  
Cell Lines ◽  
Positive Feedback ◽  
Large Range ◽  
Eukaryotic Cells ◽  
Superresolution Microscopy ◽  
General Pathway ◽  
Flat Membranes

Eukaryotic cells use clathrin-mediated endocytosis to take up a large range of extracellular cargos. During endocytosis, a clathrin coat forms on the plasma membrane, but it remains controversial when and how it is remodeled into a spherical vesicle. Here, we use 3D superresolution microscopy to determine the precise geometry of the clathrin coat at endocytic sites. Through pseudo-temporal sorting, we determine the average trajectory of clathrin remodeling during endocytosis and find that clathrin coats assemble first on flat membranes to ~50% of the coat area, before they become rapidly and continuously bent. We introduce a mathematical model that assumes a positive feedback for curvature generation of the clathrin coat. This Cooperative Curvature Model agrees excellently with experimental data in three cell lines, and likely describes a general pathway for clathrin coat remodeling during endocytosis.

Sign in / Sign up

Export Citation Format

Share Document