scholarly journals Performance and Profitability of Fungicides for Managing Soybean White Mold: A 10-Year Summary of Cooperative Trials

Plant Disease ◽  
2019 ◽  
Vol 103 (9) ◽  
pp. 2212-2220
Author(s):  
Jhonatan P. Barro ◽  
Maurício C. Meyer ◽  
Claúdia V. Godoy ◽  
Alfredo R. Dias ◽  
Carlos M. Utiamada ◽  
...  
Keyword(s):  
Low Cost ◽  
Disease Incidence ◽  
Network Models ◽  
Field Trials ◽  
White Mold ◽  
Yield Data ◽  
Soybean Price ◽  
Cost Treatment ◽  
Untreated Check ◽  
Yield Responses

White mold, caused by Sclerotinia sclerotiorum, is a yield-limiting disease of soybean in Brazil. Uniform fungicide trials have been conducted annually since 2009. Data from 74 cooperative field trials conducted over a 10-year period were assembled. We selected five fungicides applied two times around flowering: dimoxystrobin plus boscalid (DIMO+BOSC), carbendazim plus procymidone (CARB+PROC), fluazinam (FLUZ), fluopyram (FLUO), and procymidone (PROC). For comparison, thiophanate-methyl (TMET) applied four times was also included as a low-cost treatment. Network models were fitted to the log of white mold incidence (percentages) and log of sclerotia mass data (grams/hectare) and to the nontransformed yield data (kilograms/hectare) for each treatment, including the untreated check. Back-transformation of the meta-analytic estimates indicated that the lowest and highest mean (95% confidence interval [CI]) percent reductions in incidence and sclerotia mass were 54.2 (49.3 to 58.7) and 51.6% (43.7 to 58.3) for TMET and 83.8 (79.1 to 87.5) and 87% (81.9 to 91.6) for CARB+PROC, respectively. The overall mean (95% CI) yield responses ranged from 323 kg/ha (247.4 to 400.3) for TMET to 626 kg/ha (521.7 to 731.7) for DIMO+BOSC, but the variance was significantly reduced by a binary variable (30% threshold) describing disease incidence in the untreated check. On average, an increment of 352 kg/ha was estimated for trials where the incidence was >30% compared with the low-disease scenario. Hence, the probability of breaking even on fungicide costs for the high-disease scenario was >65% for the more effective, but more expensive fungicide (FLUZ) than TMET. For the low-disease scenario, profitability was less likely and depended more on variations in fungicide cost and soybean price.

scholarly journals Performance and profitability of fungicides for managing soybean white mold: a 10-year summary of cooperative trials

2019 ◽  
Author(s):  
Emerson Medeiros Del Ponte
Keyword(s):  
Low Cost ◽  
Disease Incidence ◽  
Network Models ◽  
Field Trials ◽  
White Mold ◽  
Binary Variable ◽  
Soybean Price ◽  
Cost Treatment ◽  
Untreated Check ◽  
Yield Responses

White mold, caused by Sclerotinia sclerotiorum, is a yield-limiting disease of soybean in Brazil. Uniform fungicide trials have been conducted annually since 2009. Data from 74 cooperative field trials conducted over a 10-year period were assembled. We selected five fungicides applied two times around flowering: dimoxistrobin + boscalid (DIMO+BOSC), carbendazim + procymidone (CARB+PROC), fluazinam (FLUZ), fluopyram (FLUO) and procymidone (PROC). In addition, thiophanate-methyl (TMET) applied four times was included as a low-cost treatment, for comparison. Network models were fitted to the log of white mold incidence (%) and sclerotia mass (g/ha) data and to the non-transformed yield (kg/ha) data for each treatment, including untreated check. Lowest and highest mean (95%CI) percent reduction in incidence and sclerotia mass, from back-transforming the meta-analytic estimates, was 54.2 (49.3-58.7) and 51.6 (43.7-58.3) (TMET) and 83.8 (79.1-87.5) and 87 (81.9-91.6) (CARB+PROC), respectively. The overall mean (95%CI) yield responses ranged from 323 (247.4 - 400.3) kg/ha (TMET) to 626 (521.7-731.7) kg/ha (DIMO+BOSC), but the variance was significantly explained by a binary variable (30% threshold) describing disease incidence in untreated check. On average, an increment of 352 kg/ha was estimated for trials where incidence was >30% compared to low-disease scenario. Hence, the probability of breaking even on fungicide costs for high-disease scenario was greater than 65% for the more effective, but more expensive (FLUZ) fungicide than TMET. For the low-disease scenario, profitability was less likely and depended more on variations in fungicide cost and soybean price.

scholarly journals Components of a Rice-Oilseed Rape Production System Augmented with Trichoderma sp. Tri-1 Control Sclerotinia sclerotiorum on Oilseed Rape

2015 ◽  
Vol 105 (10) ◽  
pp. 1325-1333 ◽  
Author(s):  
Xiaojia Hu ◽  
Daniel P. Roberts ◽  
Lihua Xie ◽  
Jude E. Maul ◽  
Changbing Yu ◽  
...  
Keyword(s):  
Rice Straw ◽  
Oilseed Rape ◽  
Sclerotinia Sclerotiorum ◽  
Production System ◽  
Disease Incidence ◽  
Field Studies ◽  
Field Trials ◽  
Yield Data ◽  
Similar Treatment ◽  
Trichoderma Sp

Sclerotinia sclerotiorum causes serious yield losses on many crops throughout the world. A multicomponent treatment that consisted of the residual rice straw remaining after rice harvest and Trichoderma sp. Tri-1 (Tri-1) formulated with the oilseed rape seedcake fertilizer was used in field soil infested with S. sclerotiorum. This treatment resulted in oilseed rape seed yield that was significantly greater than the nontreated control or when the fungicide carbendizem was used in the presence of this pathogen in field trials. Yield data suggested that the rice straw, oilseed rape seedcake, and Tri-1 components of this treatment all contributed incrementally. Similar treatment results were obtained regarding reduction in disease incidence. Slight improvements in yield and disease incidence were detected when this multicomponent treatment was combined with a fungicide spray. Inhibition of sclerotial germination by this multicomponent treatment trended greater than the nontreated control at 90, 120, and 150 days in field studies but was not significantly different from this control. This multicomponent treatment resulted in increased yield relative to the nontreated control in the absence of pathogen in a greenhouse pot study, while the straw alone and the straw plus oilseed rape seedcake treatments did not; suggesting that Tri-1 was capable of promoting growth. Experiments reported here indicate that a treatment containing components of a rice-oilseed rape production system augmented with Tri-1 can control S. sclerotiorum on oilseed rape, be used in integrated strategies containing fungicide sprays for control of this pathogen, and promote plant growth.

scholarly journals Response of lentil cultivars to Sclerotinia white mold and Botrytis grey mould infection under irrigated and dryland conditions

2021 ◽  
Author(s):  
Kazi Kader ◽  
Scott Erickson ◽  
Robyne Bowness ◽  
Mark A Olson ◽  
Syama Chatterton
Keyword(s):  
Sclerotinia Sclerotiorum ◽  
Disease Incidence ◽  
Grey Mould ◽  
Field Trials ◽  
Limiting Factors ◽  
White Mold ◽  
Limiting Factor ◽  
Dry Land ◽  
Grey Mold ◽  
Disease Pressure

Diseases such as Sclerotinia white mold (SWM) caused by the fungus Sclerotinia sclerotiorum (Lib.) de Bary and Botrytis grey mold (BGM) caused by the fungus Botrytis cinerea Pers. may be limiting factors for lentil production in wetter areas of Alberta, Canada. Field trials were conducted at the Lethbridge Research and Development Centre from 2013-2015 to evaluate the response of lentil cultivars to SWM and BGM and yield impacts. Ten lentil cultivars from five market classes were evaluated under irrigated and dry land plots with two planting densities (120 plants m-2 and 160 plants m-2).Year and irrigation had the largest effect on disease incidence, with highest SWM incidence occurring under irrigation in 2013, followed by 2014 and 2015. Conversely, BGM incidence under irrigation was highest in 2015 and lowest in 2013, but levels were lower than SWM. Significantly (P <0.05) lower disease incidences were observed in dryland plots, which also produced higher yield than irrigated plots. Cultivars varied significantly in SWM incidence and yield under irrigated and dryland conditions, perhaps due to variable disease pressure, but there was no consistent trend in cultivar performance. BGM incidence was similar in cultivars, but differed among years. These findings indicate that SWM may be a limiting factor to lentil production in wetter areas, as the ten cultivars from five market classes tested were all highly susceptible to SWM.

ARSENIC OCCURRENCE IN AFRICAN WATER SYSTEMS AND LOW-COST TREATMENT TECHNOLOGIES

2020 ◽  
Author(s):  
Regina Filemon Irunde ◽  
◽  
Julian Ijumulana ◽  
Julian Ijumulana ◽  
Julian Ijumulana ◽  
...  
Keyword(s):  
Low Cost ◽  
Water Systems ◽  
Cost Treatment ◽  
Treatment Technologies

scholarly journals Removal of Toxic Elements and Microbial Contaminants from Groundwater Using Low-Cost Treatment Options

2021 ◽  
Author(s):  
Dana A. Da’ana ◽  
Nabil Zouari ◽  
Mohammad Y. Ashfaq ◽  
Mohammed Abu-Dieyeh ◽  
Majeda Khraisheh ◽  
...  
Keyword(s):  
Cost Analysis ◽  
Toxic Elements ◽  
Low Cost ◽  
Treatment Technique ◽  
Groundwater Treatment ◽  
Efficient Treatment ◽  
Treatment Techniques ◽  
Cost Treatment ◽  
Treatment Technologies ◽  
Microbial Contaminants

Abstract Purpose of Review This paper reviews various low-cost treatment techniques such as adsorption, permeable reactive barrier, and biological techniques for the simultaneous removal of chemical and microbial contaminants from groundwater and discusses treatment mechanisms of different treatment techniques. This paper also discusses the challenges of groundwater treatment, how to choose the appropriate treatment technique, and cost analysis of groundwater treatment. Recent Findings Various treatment technologies have been used for the treatment of groundwater: physical, chemical, and biological technologies with different success rates. In the literature, various adsorbents have been successfully synthesized from low-cost and environmentally friendly materials. Adsorption is considered an efficient treatment technique for the removal of both toxic elements and pathogens by utilizing different adsorbents. For example, the nanostructures of MgO with a BET surface area of up to 171 m2/g obtained a very high adsorption capacity of 29,131 mg/g for fluoride ions in water, while the incorporation of iron in activated carbon has improved its adsorption capacity to 51.3 mg/g for arsenic. Moreover, certain adsorbents have shown the capability to remove 99% of the rotavirus and adenovirus from groundwater. Summary Groundwater resources are contaminated with toxic metals and pathogens. Therefore, water treatment technologies should be evaluated for their efficiency to remove such contaminants. Determination of the most cost-effective and efficient treatment technique is not an easy task and requires the understanding of various aspects such as the contaminants present in water, the reuse options considered, and cost analysis of the treatment technique.

scholarly journals In-Furrow Applications of Metalaxyl and Phosphite for Control of Pink Rot (Phytophthora erythroseptica) of Potato in New Brunswick, Canada

Plant Disease ◽  
2007 ◽  
Vol 91 (10) ◽  
pp. 1305-1309 ◽  
Author(s):  
Khalil I. Al-Mughrabi ◽  
Rick D. Peters ◽  
H. W. (Bud) Platt ◽  
Gilles Moreau ◽  
Appanna Vikram ◽  
...  
Keyword(s):  
New Brunswick ◽  
Disease Incidence ◽  
Field Trials ◽  
Russet Burbank ◽  
Viable Option ◽  
Potato Plants ◽  
Pink Rot ◽  
Phytophthora Erythroseptica ◽  
Sensitive Isolate ◽  
The Mean

The efficacy of metalaxyl-m (Ridomil Gold 480EC) and phosphite (Phostrol) applied at planting in-furrow against pink rot (Phytophthora erythroseptica) of potato (Solanum tuberosum) ‘Shepody’ and ‘Russet Burbank’ was evaluated in field trials conducted in 2005 and 2006 in Florenceville, New Brunswick, Canada. Inoculum made from a metalaxyl-m-sensitive isolate of P. erythroseptica from New Brunswick was applied either in-furrow as a vermiculite slurry at planting or as a zoospore drench in soils adjacent to potato plants in late August. After harvest, the number and weight of tubers showing pink rot symptoms were assessed and expressed as percentages of the total tuber number and total weight of tubers. Metalaxyl-m applied in-furrow was significantly more effective against pink rot than phosphite. The mean percentage of diseased tubers as a percentage of total tuber weight was 1.5% (2005) and 1.2% (2006) for metalaxyl-m-treated plots and 9.6% (2005) and 2.8% (2006) for phosphite-treated plots, a percentage similar to that obtained in inoculated control plots with no fungicide treatment. The mean percentage of diseased tubers expressed as a percentage of the total number of tubers was 1.7% (2005) and 1.3% (2006) for metalaxyl-m-treated plots and 10.1% (2005) and 3.1% (2006) for phosphite-treated plots. Disease incidence was significantly higher using the late-season inoculation technique (respective means in 2005 and 2006 were 9.9 and 3.8% diseased tubers, by weight, and 10.6 and 3.9%, by number) than with the in-furrow inoculation method (respective means in 2005 and 2006 were 3.3 and 0.7% by weight, and 3.7 and 1.3%, by number). The potato cv. Shepody was significantly more susceptible to pink rot (9.9 and 3.3% diseased tubers, by weight, in 2005 and 2006, respectively, and 10.6 and 3.9%, by number) than Russet Burbank (respective means in 2005 and 2006 were 3.4,% and 1.2%, by weight, and 3.7,% and 1.2%, by number). Our findings indicate that metalaxyl applied in-furrow at planting is a viable option for control of pink rot caused by metalaxyl-sensitive strains of P. erythroseptica, whereas phosphite was ineffective.

scholarly journals Variation in brief treatment for substance use disorder: a qualitative investigation of four federally qualified health centers with SBIRT services

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Dennis P. Watson ◽  
Monte D. Staton ◽  
Michael L. Dennis ◽  
Christine E. Grella ◽  
Christy K. Scott
Keyword(s):  
Substance Use ◽  
Substance Use Disorder ◽  
Low Cost ◽  
Health Centers ◽  
Qualitative Investigation ◽  
Brief Treatment ◽  
Federally Qualified Health Centers ◽  
Implementation Quality ◽  
Cost Treatment ◽  
Future Work

Abstract Background Brief treatment (BT) can be an effective, short-term, and low-cost treatment option for many people who misuse alcohol and drugs. However, inconsistent implementation is suggested to result in BT that often looks and potentially costs similar to regular outpatient care. Prior research is also rife with inconsistent operationalizations regarding the measurement of BT received by patients. As such, there is a need to more explicitly identify and document variations in BT practice. Methods A qualitative investigation of BT in four Federally Qualified Health Centers (FQHC) was undertaken as a sub study of a larger clinical trial. Researchers interviewed 12 staff (administrators and clinicians) involved in BT oversight, referral, or delivery within the four FQHCs. Data were analyzed following an inductive approach guided by the primary research questions. Results Findings demonstrate considerable differences in how BT was conceptualized and implemented within the FQHCs. This included a variety of ways in which BT was presented and described to patients that likely impacts how they perceive the BT they receive, including potentially not understanding they received substance use disorder treatment at all. Conclusions The findings raise questions regarding the validity of prior research, demonstrating more objective definitions of BT and fidelity checklists are needed to ensure integrity of results. Future work in this area should seek to understand BT as practiced among a larger sample of providers and the direct experiences and perspectives of patients. There is also a need for more consistent implementation, quality assurance guidelines, and standardized stage of change assessments to aid practitioners.

Otta Seals and Gravseals as Low-Cost Surfacing Alternatives for Low-Volume Roads: Experiences in South Africa

2003 ◽  
Vol 1819 (1) ◽  
pp. 338-342 ◽  
Author(s):  
Simon Oloo ◽  
Rob Lindsay ◽  
Sam Mothilal
Keyword(s):  
South Africa ◽  
Low Cost ◽  
Cost Savings ◽  
Cost Effective ◽  
Field Trials ◽  
Low Volume Roads ◽  
Kwazulu Natal ◽  
Traffic Volumes ◽  
Low Volume ◽  
To Come

The geology of the northeastern part of the province of KwaZulu–Natal, South Africa, is predominantly alluvial with vast deposits of sands. Suitable gravel sources are hard to come by, which results in high graveling and regraveling costs brought about by long haul distances and accelerated gravel loss. Most gravel roads carry fewer than 500 vehicles per day of which less than 10% are heavy vehicles. The high cost of regraveling has led to consideration of upgrading such roads to surfaced standard, even though traffic volumes do not justify upgrading. Traditional chip seals are expensive and cannot be economically justified on roads that carry fewer than 500 vehicles per day. The KwaZulu–Natal Department of Transport is actively involved in efforts to identify cost-effective alternative surfacing products for low-volume roads. Field trials were conducted with Otta seals and Gravseals, which have been used successfully in other countries, as low-cost surfacing products for low-volume roads. The Otta seal is formed by placing graded aggregates on a relatively thick film of soft binder that, because of traffic and rolling, works its way through the aggregates. Gravseal consists of a special semipriming rubberized binder that is covered by a graded aggregate. Both Otta seals and Gravseals provide relatively flexible bituminous surfaces suitable for low-volume roads. Cost savings are derived mainly from the broad aggregate specifications, which allow for the use of marginal materials.

Sign in / Sign up

Export Citation Format

Share Document