scholarly journals Disease Incidence—Inoculum Dose Relationships for Botrytis cinerea and Penicillium expansum and Decay of Pear Fruit Using Dry, Airborne Conidia

Plant Disease ◽  
2001 ◽  
Vol 85 (7) ◽  
pp. 755-759 ◽  
Author(s):  
Robert A. Spotts ◽  
Louis A. Cervantes

The objective of this research was to determine quantitative relationships between incidence of pear fruit decay and inoculum dose of Botrytis cinerea and Penicillium expansum using dry conidia applied to wet or dry pears in a settling tower. On wet fruit, incidence of gray mold fruit rot increased from 0.1 to 83.1% as the airborne concentration of B. cinerea conidia increased from 0 to 8.6 spores per liter of air. Significantly less decay occurred in fruit inoculated dry compared to wet, particularly in fruit wounded after inoculation. Incidence of blue mold increased from 1 to 100% as the airborne concentration of P. expansum conidia increased from 0.1 to 803.5 spores per liter of air. Blue mold incidence was not affected by fruit wetness or time of wounding relative to inoculation. All regressions of decay incidence versus airborne and surface conidial concentrations were highly significant (P = 0.01).

Plant Disease ◽  
2008 ◽  
Vol 92 (3) ◽  
pp. 451-455 ◽  
Author(s):  
Robert A. Spotts ◽  
Kelly M. Wallis ◽  
Maryna Serdani ◽  
Daniel T. O'Gorman ◽  
Peter L. Sholberg

The objective of this research was to determine quantitative relationships between incidence of stem end decay of pear fruit and inoculum concentration of Botrytis cinerea and Penicillium expansum using dry conidia applied to pear fruit in a settling tower. Five concentrations of conidia were applied to pear fruit, fruit were stored at –1°C for 8 months, and stem end decay was evaluated. In addition, conidia were washed from the surface of inoculated fruit, and DNA was extracted and quantified with real-time polymerase chain reaction (PCR). The linear regression relationships between percent stem end gray mold and B. cinerea conidia per liter of air or per square centimeter of fruit surface were significant (P = 0.01). At the highest inoculum dose introduced into the settling tower, conidia per liter of air, conidia per square centimeter, and percent stem end gray mold at 8 months after inoculation were 12, 31, and 39, respectively for 2000 and 6, 33, and 67, respectively for 2001. Similarly, the linear regression relationships between percent stem end blue mold and P. expansum conidia per liter of air or per square centimeter of fruit surface were significant (P = 0.01 and 0.05, respectively). At the highest inoculum dose introduced into the settling tower, conidia per square centimeter and percent stem end blue mold at 8 months after inoculation were 39 and 26, respectively for 2000 and 66 and 23, respectively for 2003. Real-time PCR provided a rapid, quantitative measure of B. cinerea and P. expansum DNA on pear fruit surfaces. Because of possible year-to-year shifts in susceptibility of fruit to decay, disease incidence:inoculum dose relationships may be of most value compared within years rather than across years. This would facilitate comparison of decay risk among orchards in order to determine which fruit is most suitable for long-term storage.


Plant Disease ◽  
2009 ◽  
Vol 93 (2) ◽  
pp. 185-189 ◽  
Author(s):  
C. L. Xiao ◽  
R. J. Boal

After harvest, apples (Malus × domestica) may be kept in cold storage for up to 12 months prior to packing. Gray mold caused by Botrytis cinerea and blue mold caused by Penicillium expansum are common postharvest fruit rot diseases affecting apples and are controlled commonly by applications of fungicides after harvest. To search for an alternative strategy, Pristine (a premixed formulation of boscalid and pyraclostrobin) as a preharvest treatment was evaluated for control of postharvest gray mold and blue mold in cultivars Fuji and Red Delicious apples during 2004 to 2006. Pristine (0.36 g per liter of water) was applied 1, 7, or 14 days before harvest. For comparison, thiram (2.04 g per liter of water) was applied 7 days before harvest and ziram (2.4 g per liter of water) was applied 14 days before harvest, to Fuji and Red Delicious, respectively. Fruit were harvested at commercial maturity, wounded with a finishing nail head, inoculated with conidial suspensions of either B. cinerea or P. expansum, stored in air at 0°C, and evaluated for decay after 8 or 12 weeks. In 2004 and 2005, Pristine was equally effective when applied to Fuji 1 or 7 days before harvest, reducing gray mold incidence by 93 to 99% and blue mold incidence by 78 to 94% compared with the nontreated control. Thiram reduced gray mold incidence by 38 to 85%. Thiram reduced blue mold incidence by 22% in 2004 but not in 2005. On Red Delicious, Pristine was equally effective when applied 7 or 14 days before harvest and reduced gray mold incidence by 69 to 85% and blue mold incidence by 41 to 70%. Ziram applied 2 weeks before harvest reduced gray mold incidence by 97 and 94% in 2005 and 2006, respectively, but it did not reduce blue mold incidence. The results indicate that Pristine applied within 2 weeks before harvest may be an effective alternative to postharvest fungicides for control of postharvest gray mold and blue mold in Fuji and Red Delicious apples.


2005 ◽  
Vol 58 ◽  
pp. 317-317
Author(s):  
R.A. Spotts ◽  
M. Serdani ◽  
M. Walter ◽  
P. Harris-Virgin

2002 ◽  
Vol 92 (3) ◽  
pp. 281-287 ◽  
Author(s):  
Carla Nunes ◽  
Josep Usall ◽  
Neus Teixidó ◽  
Maribel Abadias ◽  
Immaculada Viñas

The potential enhancement of Candida sake (CPA-1) by ammonium molybdate to control blue and gray mold caused by Penicillium expansum and Botrytis cinerea, respectively, on Blanquilla pears was investigated. In laboratory trials, improved control of blue and gray molds was obtained with the application of ammonium molybdate (1, 5, 10, and 15 mM) alone or in combination with C. sake at 2 × 106 or 2 × 107 CFU ml-1 on Blanquilla pears stored at 20°C. In semicommercial trials at 1°C for 5 months, the efficacy of C. sake at 2 × 106 CFU ml-1 on reducing P. expansum and B. cinerea decay was enhanced more than 88% with the addition of ammonium molybdate 5 mM in the 1999-2000 season. In two seasons, the performance C. sake at 2 × 106 CFU ml-1 plus ammonium molybdate was similar to or greater than that of C. sake at 2 × 107 CFU ml-1. Similar control of blue mold was obtained on pears stored under low oxygen conditions. The preharvest application of ammonium molybdate did not reduce postharvest blue mold decay. The population of C. sake on pear wounds significantly decreased in the presence of ammonium molybdate 1 and 5 mM at 20 and 1°C.


Plant Disease ◽  
2000 ◽  
Vol 84 (3) ◽  
pp. 249-253 ◽  
Author(s):  
Ahmed El-Ghaouth ◽  
Joseph L. Smilanick ◽  
Michael Wisniewski ◽  
Charles L. Wilson

A combination of Candida saitoana with 0.2% 2-deoxy-D-glucose to control decay of apple, lemon, and orange fruit was evaluated. Growth of C. saitoana in vitro was reduced by 2-deoxy-D-glucose; however, in apple wounds, the yeast grew as well in the presence of 2-deoxy-D-glucose as in its absence. When applied to fruit wounds before inoculation, the combination of C. saitoana with 0.2% 2-deoxy-D-glucose was more effective in controlling decay of apple, orange, and lemon caused by Botrytis cinerea, Penicillium expansum, and P. digitatum than either C. saitoana or the application of a 0.2% solution of 2-deoxy-D-glucose alone. Increasing the concentration of 2-deoxy-D-glucose from 0.2 to 0.5% did not improve control significantly. The combination of C. saitoana with 0.2% 2-deoxy-D-glucose was also effective against infections established up to 24 h before treatment. When applied within 24 h after inoculation, the combination of C. saitoana with 0.2% 2-deoxy-D-glucose was very effective in controlling blue mold of apple and green mold of orange and lemon. The level of control of green mold was equivalent to imazalil treatment. When either C. saitoana or 0.2% 2-deoxy-D-glucose was applied within 24 h after inoculation, neither had an effect on disease development on apple, orange, or lemon, and the incidence of decay was similar to the water-treated control.


Plant Disease ◽  
2011 ◽  
Vol 95 (6) ◽  
pp. 666-672 ◽  
Author(s):  
S. Konstantinou ◽  
G. S. Karaoglanidis ◽  
G. A. Bardas ◽  
I. S. Minas ◽  
E. Doukas ◽  
...  

The incidence of pathogens associated with postharvest fruit rots on the four most extensively cultivated apple cultivars (Red Delicious, Golden Delicious, Granny Smith, and Fuji) in Greece was surveyed during two consecutive storage periods (2008–09 and 2009–10) in five packinghouses located in northern Greece. The fungi isolated were identified based on their morphological characteristics and internal transcribed spacer gene sequencing. In the four cultivars sampled, Penicillium expansum and Botrytis cinerea were the predominant pathogens, accounting for averages of 44.2 and 23.6%, respectively, of the pathogens isolated from the sampled fruit. Two other important rot pathogens were Alternaria tenuissima and Mucor pyriformis, accounting for 16.1 and 6.6%, respectively, of the diseased apple fruit. Other pathogens such as Monilinia laxa, M. fructigena, Botryosphaeria obtusa, Geotrichum candidum, Fusarium avenaceum, and F. proliferatum were isolated at low frequencies and are considered of minor importance. Measurements of the resistance level of the four apple cultivars to fruit rot caused by P. expansum and Botrytis cinerea revealed that Golden Delicious was the most susceptible to blue mold while Fuji was the most susceptible to gray mold infections. Susceptibility to gray mold was negatively correlated with flavonoid and phenol concentration as well to fruit antioxidant activity, while susceptibility to blue mold was negatively correlated with fruit firmness and phenol concentration. Patulin production was significantly higher in Red Delicious and Golden Delicious fruit than in Granny Smith and Fuji fruit and was negatively correlated with the acidity of the fruit. The high incidence of P. expansum and A. tenuissima along with the presence of F. avenaceum and F. proliferatum, all of which are potentially mycotoxin producers, emphasize the risk for mycotoxin contamination of apple fruit juices and by-products. Furthermore, information on the distribution of the pathogens on the main cultivars may be useful for the implementation of strategies to control the diseases and minimize the threat of mycotoxin contamination on each cultivar.


2002 ◽  
Vol 65 (1) ◽  
pp. 178-184 ◽  
Author(s):  
CARLA NUNES ◽  
JOSEP USALL ◽  
NEUS TEIXIDÓ ◽  
ROSARIO TORRES ◽  
IMMACULADA VIÑAS

The effectiveness of Candida sake (CPA-1) in combination with Pantoea agglomerans (CPA-2) for controlling Penicillium expansum and Botrytis cinerea on pears and apples was determined. The concentrations tested were 2 × 106 and 2 × 107 CFU/ml for C. sake and 2 × 107 and 8 × 107 CFU/ml for P. agglomerans. At room temperature, the two antagonists were combined in proportions of 0 to 100% in 25% increments. At the proportion of 50:50, no rot development was observed in pears, and the greatest control of blue mold in apples was observed at this proportion for all the tested concentrations. Under cold temperature on pears, the highest effectiveness of the mixture was observed when C. sake at 2 × 107 CFU/ml was combined with P. agglomerans at 2 × 107 or at 8 × 107 CFU/ml at the proportion 50:50. Under these conditions, no rot development of blue mold was reported, and gray mold lesion size was reduced by more than 95%. On apples, the mixture of C. sake at 2 × 107 CFU/ml and P. agglomerans at 8 × 107 CFU/ml at the proportion 50:50 reduced blue and gray mold incidence by 90%. Populations of the two antagonists had the same growth pattern at 20°C when they were applied individually or in combination, but the population level was always higher when they grew alone. In contrast, at 1°C, the population of both antagonists in combination formed a stable community with the same levels as individual application during the first 30 days; after that, C. sake dominated, and P. agglomerans decreased on apples and pears. At both temperatures, the maximum population level of C. sake was observed in apples, and the maximum population level of P. agglomerans was observed in pears.


HortScience ◽  
1990 ◽  
Vol 25 (3) ◽  
pp. 320-322 ◽  
Author(s):  
F. Takeda ◽  
W.J. Janisiewicz ◽  
J. Roitman ◽  
N. Mahoney ◽  
F.B. Abeles

Postharvest treatment with pyrrolnitrin (250 mg·liter-1) and low storage temperatures delay postharvest rot development in fall-harvested `Tribute' strawberries (Fragaria × ananassa Duch.). Untreated fruit stored at 18C developed gray mold fruit rot (Botrytis cinerea) and rhizopus rot (leak) by the second day. Fruit that did not develop gray mold or leak eventually developed blue mold rot (Penicillium spp.). No rot was observed at 1C, but gray mold and rhizopus rots developed after berries were transferred to 18C. Pyrrolnitrin delayed the appearance of the various rots by 2 to 4 days, but did not reduce the rate of rot development. Chemical name used: 3-chloro-4-(2'-nitro-3'-chlorophenyl)pyrrole (pyrrolnitrin).


Plant Disease ◽  
2021 ◽  
Author(s):  
Nooreen Mamode Ally ◽  
Hudaa Neetoo ◽  
Mala Ranghoo-Sanmukhiya ◽  
Shane Hardowar ◽  
Vivian Vally ◽  
...  

Gray mold is one of the most important fungal diseases of greenhouse-grown vegetables (Elad and Shtienberg 1995) and plants grown in open fields (Elad et al. 2007). Its etiological agent, Botrytis cinerea, has a wide host range of over 200 species (Williamson et al. 2007). Greenhouse production of tomato (Lycopersicon esculentum Mill.) is annually threatened by B. cinerea which significantly reduces the yield (Dik and Elad 1999). In August 2019, a disease survey was carried out in a tomato greenhouse cv. ‘Elpida’ located at Camp Thorel in the super-humid agroclimatic zone of Mauritius. Foliar tissues were observed with a fuzzy-like appearance and gray-brown lesions from which several sporophores could be seen developing. In addition, a distinctive “ghost spot” was also observed on unripe tomato fruits. Disease incidence was calculated by randomly counting and rating 100 plants in four replications and was estimated to be 40% in the entire greenhouse. Diseased leaves were cut into small pieces, surface-disinfected using 1% sodium hypochlorite, air-dried and cultured on potato dextrose agar (PDA). Colonies having white to gray fluffy mycelia formed after an incubation period of 7 days at 23°C. Single spore isolates were prepared and one, 405G-19/M, exhibited a daily growth of 11.4 mm, forming pale brown to gray conidia (9.7 x 9.4 μm) in mass as smooth, ellipsoidal to globose single cells and produced tree-like conidiophores. Black, round sclerotia (0.5- 3.0 mm) were formed after 4 weeks post inoculation, immersed in the PDA and scattered unevenly throughout the colonies. Based on these morphological characteristics, the isolates were presumptively identified as B. cinerea Pers. (Elis 1971). A DNeasy Plant Mini Kit (Qiagen, Hilden, Germany) was used for the isolation of DNA from the fungal mycelium followed by PCR amplification and sequencing with primers ITS1F (CTTGGTCATTTAGAGGAAGTAA) (Gardes and Bruns 1993) and ITS4 (TCCTCCGCTTATTGATATGC) (White et al. 1990). The nucleotide sequence obtained (551 bp) (Accession No. MW301135) showed a 99.82-100% identity with over 100 B. cinerea isolates when compared in GenBank (100% with MF741314 from Rubus crataegifolius; Kim et al. 2017). Under greenhouse conditions, 10 healthy tomato plants cv. ‘Elpida’ with two true leaves were sprayed with conidial suspension (1 x 105 conidia/ml) of the isolate 405G-19/M while 10 control plants were inoculated with sterile water. After 7 days post-inoculation, the lesions on the leaves of all inoculated plants were similar to those observed in the greenhouse. No symptoms developed in the plants inoculated with sterile water after 15 days. The original isolate was successfully recovered using the same technique as for the isolation, thus fulfilling Koch’s postulates. Although symptoms of gray mold were occasionally observed on tomatoes previously (Bunwaree and Maudarbaccus, personal communication), to our knowledge, this is the first report that confirmed B. cinerea as the causative agent of gray mold on tomato crops in Mauritius. This disease affects many susceptible host plants (Sarven et al. 2020) such as potatoes, brinjals, strawberries and tomatoes which are all economically important for Mauritius. Results of this research will be useful for reliable identification necessary for the implementation of a proper surveillance, prevention and control approaches in regions affected by this disease.


Plant Disease ◽  
2019 ◽  
Vol 103 (7) ◽  
pp. 1577-1583 ◽  
Author(s):  
M. Muñoz ◽  
J. E. Faust ◽  
G. Schnabel

Botrytis cinerea Pers. infects cut flower roses (Rosa × hybrida L.) during greenhouse production and gray mold symptoms are often expressed in the postharvest environment, resulting in significant economic losses. Disease management is based on cultural practices and preventative chemical treatments; however, gray mold outbreaks continue to occur. Rose tissues from six commercial shipments from two greenhouses in Colombia were evaluated to determine the Botrytis species composition as well as identify other pathogens present, gray mold incidence and severity, and fungicide resistance profiles. Botrytis isolates (49 total) were grouped into six morphological phenotypes, and all were identified to be B. cinerea sensu stricto. Disease incidence was higher in the petals than in the stem, stamen, ovary, sepal, or leaf tissues. Other fungi were isolated infrequently and included Alternaria alternata, Cladosporium cladosporioides, Epicoccum nigrum, Penicillium citrinum, Aspergillus brasiliensis, and Diplodia sp. Fungicide resistance profiles were determined using previously established discriminatory doses. Isolates resistant to thiophanate-methyl, iprodione, boscalid, and cyprodinil were found frequently in all shipments and in both greenhouses. The frequency of resistance to penthiopyrad, fenhexamid, fluopyram, isofetamid, and fludioxonil varied between shipments and greenhouses. No resistance to pydiflumetofen was observed at the discriminatory doses tested. Isolates with resistance to multiple chemical classes were commonly found. These results indicate that fungicide resistance management practices may improve preharvest and postharvest gray mold control of cut flower roses.


Sign in / Sign up

Export Citation Format

Share Document