Sir Charles William Oatley, O. B. E. 14 February 1904–11 March 1996

1998 ◽  
Vol 44 ◽  
pp. 331-347 ◽  
Author(s):  
K. C. A. Smith

Charles Oatley made three outstanding contributions to the engineering sciences: he was one of the brilliant team that developed radar in Britain during the Second World War; he revolutionized the teaching of electronics at Cambridge University; and he developed the scanning electron microscope. It is for the last of these that he will be chiefly remembered. He stands with Manfred von Ardenne as one of the two great pioneers of scanning electron microscopy His involvement with the instrument began shortly after the war when, fresh from his experience in the development of radar, he perceived that new techniques could be brought to bear which would overcome some of the fundamental problems encountered by von Ardenne in his pre–war research. Oatley's work led directly to the launch of the world's first series production instrument—the Stereoscan—in 1965. Thousands of scanning electron microscopes have since been manufactured and are to be found in practically every research laboratory in the world. The striking three–dimensional images of microscopic organisms produced have been used to illustrate countless newspaper and magazine articles, as well as scientific research papers, giving the general public a new perspective and appreciation of the world that lies beyond the resolution of the human eye. The scanning electron microscope is, arguably, the single most important scientific instrument of the post-war era.

Author(s):  
Hadi M. Hamza Al-Mayali ◽  
Hind A. Abdul Kadhim

Introduction: Echinococcosis and hydatidosis caused by the metacestode of Echinococcus granulosus are among the most important zoonotic diseases in the world. This study aims to study the ultrastructure of fertile hydatid cysts that infect humans using a scanning electron microscope (SEM). Materials and Methods: Twenty samples of human fertile hydatid cysts were collected from the human liver and lung after performing surgery operations and examined with an SEM. Results: The results of the electron microscopy with different magnifications revealed that the laminated layer (LL) consists of sheets that appeared more compact and aligned. The brood capsules appeared, consisting of a net of finger-shaped structures that emerged from bulges of various sizes and shapes. Conclusion: Under a transmission electron microscope, it was found that the LL had a coherent and flexible structure, settling on a three-dimensional microscopic network of hydrophilic fibers, with high humidity. These fibers were arranged irregularly and had a diameter of about 10 nm; therefore, the fibers adjacent to the germinal layer (GL) were possibly attached to microtriches of tegument, which reached a thickness of 1 mm in the LL.


Author(s):  
E. R. Walter

The information obtainable with the scanning electron microscope can often be increased severalfold through the use of stereomicrograph pairs. Not only is the detail which can be observed the equivalent of a 2X increase in magnification over that apparent in a single micrograph, but, threedimensional spatial relationships are more accurately preserved. This is especially true where protruding or pyramided fine structure and/or gross reentrance exists. Since stereo micrographs are conveniently obtained with most scanning electron microscopes, it is generally desirable to add the additional information they offer whenever the three-dimensional relationships present in the specimen'are not readily apparent.


2011 ◽  
Vol 284-286 ◽  
pp. 1584-1587
Author(s):  
Zhen Xue Shi ◽  
Jia Rong Li ◽  
Shi Zhong Liu ◽  
Jin Qian Zhao

The specimens of low angle boundaries were machined from the second generation single crystal superalloy DD6 blades. The microstructures of low angle boundaries (LAB) were investigated from three scales of dendrite, γ′ phase and atom with optical microscopy (OM), scanning electron microscope (SEM), transition electron microscope (TEM) and high resolution transmission electrion microscopy (HREM). The results showed that on the dendrite scale LAB is interdendrite district formed by three dimensional curved face between the adjacent dendrites. On the γ′ phase scale LAB is composed by a thin layer γ phase and its bilateral imperfect cube γ′ phase. On the atom scale LAB is made up of dislocations within several atom thickness.


1990 ◽  
Vol 12 (3) ◽  
pp. 315-322 ◽  
Author(s):  
Masanori HISAOKA ◽  
Joji HARATAKE ◽  
Osamu YAMAMOTO ◽  
Akio HORIE

2014 ◽  
Vol 32 (2) ◽  
pp. 275-278
Author(s):  
Joanna Z. Kadłubowska ◽  
Ewa Kalinowska-Kucharska

Several year long investigations of the developmental cycle of <i>Microsphaera palczewskii</i> occurring on the leaves of <i>Caragana arborescens</i> in Central Poland are reported. The material was studied with light and scanning electron microscopes. The scanning microscopy micrographs of the clistothecia and appendages presented in this report are the first micrographs of this species.


2018 ◽  
Vol 69 (1) ◽  
pp. 24-31
Author(s):  
Khaled S. Hatamleh ◽  
Qais A. Khasawneh ◽  
Adnan Al-Ghasem ◽  
Mohammad A. Jaradat ◽  
Laith Sawaqed ◽  
...  

Abstract Scanning Electron Microscopes are extensively used for accurate micro/nano images exploring. Several strategies have been proposed to fine tune those microscopes in the past few years. This work presents a new fine tuning strategy of a scanning electron microscope sample table using four bar piezoelectric actuated mechanisms. The introduced paper presents an algorithm to find all possible inverse kinematics solutions of the proposed mechanism. In addition, another algorithm is presented to search for the optimal inverse kinematic solution. Both algorithms are used simultaneously by means of a simulation study to fine tune a scanning electron microscope sample table through a pre-specified circular or linear path of motion. Results of the study shows that, proposed algorithms were able to minimize the power required to drive the piezoelectric actuated mechanism by a ratio of 97.5% for all simulated paths of motion when compared to general non-optimized solution.


2009 ◽  
Vol 69 (4) ◽  
pp. 1059-1071 ◽  
Author(s):  
M. Garcia ◽  
C. Odebrecht

The detailed description of rarely recorded Thalassiosira species in Brazil is presented with light microscope (LM) and scanning electron microscope (SEM) illustrations. A total of 78 phytoplankton net samples (20 µm) collected between the years 2000 and 2006 in coastal waters of southern Brazilian, Cassino Beach and the estuary of Lagoa dos Patos, were studied in cleaned material using the Axiovert Zeiss LM and Jeol 6060 SEM. Water temperature and salinity of samples and six species are presented: Thalassiosira endoseriata, T. hendeyi, T. lundiana, T. minuscula, T. oceanica and T. wongii. Two species, Thalassiosira hendeyi and T. endoseriata were the most common being observed in all seasons at Cassino Beach in a wide temperature range (10-26 ºC), while only sporadically in the estuary of Lagoa dos Patos. Thalassiosira endoseriata, T. lundiana, T. oceanica and T. wongii are for the first time reported in Brazilian coastal waters. The latter two species, rarely recorded in the world, are fully illustrated based on Brazilian material.


1997 ◽  
Vol 3 (S2) ◽  
pp. 1243-1244 ◽  
Author(s):  
Raynald Gauvin ◽  
Steve Yue

The observation of microstructural features smaller than 300 nm is generally performed using Transmission Electron Microscopy (TEM) because conventional Scanning Electron Microscopes (SEM) do not have the resolution to image such small phases. Since the early 1990’s, a new generation of microscopes is now available on the market. These are the Field Emission Gun Scanning Electron Microscope with a virtual secondary electron detector. The field emission gun gives a higher brightness than those obtained using conventional electron filaments allowing enough electrons to be collected to operate the microscope with incident electron energy, E0, below 5 keV with probe diameter smaller than 5 nm. At 1 keV, the electron range is 60 nm in aluminum and 10 nm in iron (computed using the CASINO program). Since the electron beam diameter is smaller than 5 nm at 1 keV, the resolution of these microscopes becomes closer to that of TEM.


Sign in / Sign up

Export Citation Format

Share Document