Acoustic experiments relating to the coefficients of viscosity of various liquids

The concept of second viscosity was revived to explain the high attenuation, much greater than their first viscosity would justify, of ultrasonics in certain organic liquids. Certainly these liquids are more sensitive to second-order effects such as the production of streaming from a sound source immersed therein, which—under certain circumstances—may be related to the observed ultrasonic absorption. On the other hand, the heat generated during the passage of the ultrasonics is of the same order as that produced in a liquid of the same first viscosity. Experiments in which compressional waves are propagated through the liquid contained in a capillary tube show that the first viscosity is adequate to predict the attenuation, and the same coefficient explains the propagation of shear waves into the liquid.

1980 ◽  
Vol 47 (1) ◽  
pp. 75-81 ◽  
Author(s):  
R. T. Shield

When a mechanical system has a potential energy, it is a simple matter to show that if the generalized force corresponding to a coordinate p is known to first order in p for a range of the other coordinates of the system, then the other generalized forces can be found immediately to second order in p, without requiring a second-order analysis of the system. By this method the second-order change in the axial force when a finitely extended elastic cylinder is twisted is found from the first-order value of the twisting moment. Numerical results for a realistic form of the strain-energy function for an incompressible material suggest that the second-order expression for the axial force is very accurate for a wide range of twist for circular cylinders of rubber-like materials extended 100 percent or more.


2015 ◽  
Vol 36 (4) ◽  
pp. 228-236 ◽  
Author(s):  
Janko Međedović ◽  
Boban Petrović

Abstract. Machiavellianism, narcissism, and psychopathy are personality traits understood to be dispositions toward amoral and antisocial behavior. Recent research has suggested that sadism should also be added to this set of traits. In the present study, we tested a hypothesis proposing that these four traits are expressions of one superordinate construct: The Dark Tetrad. Exploration of the latent space of four “dark” traits suggested that the singular second-order factor which represents the Dark Tetrad can be extracted. Analysis has shown that Dark Tetrad traits can be located in the space of basic personality traits, especially on the negative pole of the Honesty-Humility, Agreeableness, Conscientiousness, and Emotionality dimensions. We conclude that sadism behaves in a similar manner as the other dark traits, but it cannot be reduced to them. The results support the concept of “Dark Tetrad.”


2014 ◽  
Vol 42 (4) ◽  
pp. 290-304
Author(s):  
Rajarajan Aiyengar ◽  
Jyoti Divecha

ABSTRACT The blends of natural rubber (NR), polybutadiene rubber (BR), and other forms of rubbers are widely used for enhancing the mechanical and physical properties of rubber compounds. Lots of work has been done in conditioning and mixing of NR/BR blends to improve the properties of its rubber compounds and end products such as tire tread. This article employs response surface methodology designed experiments in five factors; high abrasion furnace carbon black (N 330), aromatic oil, NR/BR ratio, sulfur, and N-oxydiethylene-2-benzothiazole sulfenamide for determination of combined and second order effects of the significant factors leading to simultaneous optimization of the NR/BR blend system. One of the overall optimum of eight properties existed at carbon 44 phr, oil 6.1 phr, NR/BR 78/22 phr with the following values of properties: tensile strength (22 MPa), elongation at break (528%), tear resistance (30 kg/mm), rebound resilience (67%), moderate hardness (68 International rubber hardness degrees) with low heat buildup (17 °C), permanent set (12%), and abrasion loss (57 mm3). More optimum combinations can easily be determined from the NR/BR blend system models contour plots.


2020 ◽  
Vol 13 (2) ◽  
pp. 44-54
Author(s):  
Hendrico Firzandy Latupeirissa ◽  
Gierlang Bhakti Putra ◽  
Niki Prastomo

Brick debris that makes up the majority of construction waste has not received proper waste disposal in Indonesia. On the other hand, brick debris could be potentially reused as non-structural building materials to reduce its negative impact on the environment. This study aims to test the effectiveness of soundproofing on recycled brick debris. The soundproof test was carried out on brick debris in the form of fine and coarse grains. The simulation box is then used as a support for the brickwork material and then the box is exposed to a sound source with a certain level of noise that is considered disturbing human comfort. Noise level measurements are made in the outside and inside the box. These measurements are tabulated and then analyzed to see the success of the two aggregates in reducing noise. Basically, the brickwork material has succeeded in becoming a recycled building material that can absorb noise, although further research must be carried out to be able to state that this material is truly ready to be used as an alternative building material with good acoustic capabilities.


2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Osama Moaaz ◽  
Choonkil Park ◽  
Elmetwally M. Elabbasy ◽  
Waed Muhsin

AbstractIn this work, we create new oscillation conditions for solutions of second-order differential equations with continuous delay. The new criteria were created based on Riccati transformation technique and comparison principles. Furthermore, we obtain iterative criteria that can be applied even when the other criteria fail. The results obtained in this paper improve and extend the relevant previous results as illustrated by examples.


2020 ◽  
Vol 117 (24) ◽  
pp. 243501
Author(s):  
Anna N. Matsukatova ◽  
Andrey V. Emelyanov ◽  
Anton A. Minnekhanov ◽  
Aleksandr A. Nesmelov ◽  
Artem Yu. Vdovichenko ◽  
...  

1995 ◽  
Vol 74 (6) ◽  
pp. 2665-2684 ◽  
Author(s):  
Y. Kondoh ◽  
Y. Hasegawa ◽  
J. Okuma ◽  
F. Takahashi

1. A computational model accounting for motion detection in the fly was examined by comparing responses in motion-sensitive horizontal system (HS) and centrifugal horizontal (CH) cells in the fly's lobula plate with a computer simulation implemented on a motion detector of the correlation type, the Reichardt detector. First-order (linear) and second-order (quadratic nonlinear) Wiener kernels from intracellularly recorded responses to moving patterns were computed by cross correlating with the time-dependent position of the stimulus, and were used to characterize response to motion in those cells. 2. When the fly was stimulated with moving vertical stripes with a spatial wavelength of 5-40 degrees, the HS and CH cells showed basically a biphasic first-order kernel, having an initial depolarization that was followed by hyperpolarization. The linear model matched well with the actual response, with a mean square error of 27% at best, indicating that the linear component comprises a major part of responses in these cells. The second-order nonlinearity was insignificant. When stimulated at a spatial wavelength of 2.5 degrees, the first-order kernel showed a significant decrease in amplitude, and was initially hyperpolarized; the second-order kernel was, on the other hand, well defined, having two hyperpolarizing valleys on the diagonal with two off-diagonal peaks. 3. The blockage of inhibitory interactions in the visual system by application of 10-4 M picrotoxin, however, evoked a nonlinear response that could be decomposed into the sum of the first-order (linear) and second-order (quadratic nonlinear) terms with a mean square error of 30-50%. The first-order term, comprising 10-20% of the picrotoxin-evoked response, is characterized by a differentiating first-order kernel. It thus codes the velocity of motion. The second-order term, comprising 30-40% of the response, is defined by a second-order kernel with two depolarizing peaks on the diagonal and two off-diagonal hyperpolarizing valleys, suggesting that the nonlinear component represents the power of motion. 4. Responses in the Reichardt detector, consisting of two mirror-image subunits with spatiotemporal low-pass filters followed by a multiplication stage, were computer simulated and then analyzed by the Wiener kernel method. The simulated responses were linearly related to the pattern velocity (with a mean square error of 13% for the linear model) and matched well with the observed responses in the HS and CH cells. After the multiplication stage, the linear component comprised 15-25% and the quadratic nonlinear component comprised 60-70% of the simulated response, which was similar to the picrotoxin-induced response in the HS cells. The quadratic nonlinear components were balanced between the right and left sides, and could be eliminated completely by their contralateral counterpart via a subtraction process. On the other hand, the linear component on one side was the mirror image of that on the other side, as expected from the kernel configurations. 5. These results suggest that responses to motion in the HS and CH cells depend on the multiplication process in which both the velocity and power components of motion are computed, and that a putative subtraction process selectively eliminates the nonlinear components but amplifies the linear component. The nonlinear component is directionally insensitive because of its quadratic non-linearity. Therefore the subtraction process allows the subsequent cells integrating motion (such as the HS cells) to tune the direction of motion more sharply.


ce/papers ◽  
2021 ◽  
Vol 4 (2-4) ◽  
pp. 2249-2254
Author(s):  
Jian‐Wei He ◽  
Lei Zhao ◽  
Yao‐Peng Liu ◽  
Siu‐Lai Chan

1985 ◽  
Vol 11 (4) ◽  
pp. 598-610 ◽  
Author(s):  
Edward Zamble ◽  
G. Marilyn Hadad ◽  
John B. Mitchell ◽  
Tim R. H. Cutmore

Sign in / Sign up

Export Citation Format

Share Document