The pvt properties of water v*. the fluid to 1 kbar at 350-500 °c and along the saturation line from 150 to 350 °c

1985 ◽  
Vol 315 (1532) ◽  
pp. 235-246 ◽  
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Expansion Method ◽  
Low Pressure ◽  
Saturation Line ◽  
Density Change ◽  
Pvt Properties ◽  
Gas Expansion ◽  
Low Pressures ◽  
Density Of Water

The density of water has been measured from low pressures to 1 kbar (1 bar = 10 5 Pa) at 25 K intervals from 350 to 500 °C and the density change on condensation has been measured from 150 to 350 °C by injecting water into a 35 cm 3 high-temperature vessel that can be completely filled in a single delivery from the screw injector used in earlier work. The thermal expansion of the vessel was determined by a gas-expansion method. The estimated uncertainty caused by the uncertainty of the volume of the vessel at low pressure is 0.02 kg m -3 at 150 °C and 0.08 kg m -3 at all other temperatures, and the uncertainty arising from the uncertainty in the compression of the vessel is 0.10 kg m -3 kbar -1 .

The PVT properties of water, IV. Liquid water in the range 150-350 °C, from saturation to 1 kbar

1978 ◽  
Vol 360 (1702) ◽  
pp. 389-402 ◽  
Keyword(s):  
Thermal Expansion ◽  
Liquid Water ◽  
Expansion Method ◽  
Pvt Properties ◽  
Gas Expansion

The change of density of liquid water has been measured at 25 K intervals from 150 to 350 °C and at 60 bar intervals from near saturation, with the apparatus previously used below 150 °C. The precision falls from ca. 10/10 6 along isotherms at 150 °C to ca. 100/10 6 at 350 °C, because of the uncertainties of the thermal expansion of the vessel, which was measured by a gas-expansion method.

Low-pressure superconductivity in lithium-doped methane predicted by first principles

2020 ◽  
pp. 2150032
Author(s):  
Ning Lu ◽  
Yu-Long Hai ◽  
Hai-Yan Lv ◽  
Wen-Jie Li ◽  
Chun-Lei Yang ◽  
...  
Keyword(s):  
Charge Transfer ◽  
High Temperature ◽  
Crystal Field ◽  
First Principles ◽  
Pressure Range ◽  
High Temperature Superconductor ◽  
Low Pressure ◽  
First Principles Calculations ◽  
A Charge ◽  
Low Pressures

To explore the high-temperature superconductor at low pressures, we have investigated the crystal structures, electronic properties, and possible superconductivity in the case of methane (CH4) doped by lithium in the pressure range of [Formula: see text][Formula: see text]GPa, based on the first-principles calculations. The results show that Li-intercalated CH4 (Lix(CH4)[Formula: see text]) can realize metallization and superconductivity at low pressures, even 5[Formula: see text]GPa. We find that there is a charge transfer between Li and CH4, but the metallization is driven by the change of crystal field induce by doping instead of charge transfer. The critical temperture is predicted from 3.8[Formula: see text]K at 5[Formula: see text]GPa for LiCH4 to 12.1[Formula: see text]K at 100[Formula: see text]GPa for Li(CH4)4. The low-pressure superconductivity of Lix(CH4)[Formula: see text] can be further optimized by adjusting component and pressure.

NILO ALLOY 36

Alloy Digest ◽  
1987 ◽  
Vol 36 (8) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Constant Coefficient ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Iron Nickel

Abstract NILO alloy 36 is a binary iron-nickel alloy having a very low and essentially constant coefficient of thermal expansion at atmospheric temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-79. Producer or source: Inco Alloys International Inc..

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

RED X-20

Alloy Digest ◽  
1960 ◽  
Vol 9 (2) ◽  
Keyword(s):  
Wear Resistance ◽  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Aluminum Silicon Alloy ◽  
Temperature Performance

Abstract RED X-20 is a heat treatable hypereutectic aluminum-silicon alloy with excellent wear resistance and a very low coefficient of thermal expansion. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-89. Producer or source: Apex Smelting Company.

CARPENTER INVAR 36 ALLOY

Alloy Digest ◽  
2004 ◽  
Vol 53 (8) ◽  
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Carbon Steel ◽  
Physical Properties ◽  
Iron Alloy ◽  
Nickel Iron ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Nickel Iron Alloy

Abstract Carpenter Invar 36 alloy is a 36% nickel-iron alloy with a rate of thermal expansion approximately one-tenth that of carbon steel at temperatures up to 204 deg C (400 deg F). This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on low and high temperature performance. Filing Code: FE-131. Producer or source: Carpenter Technology Corporation.

AA 4032

Alloy Digest ◽  
1990 ◽  
Vol 39 (7) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance

Abstract AA 4032 has a comparatively low coefficient of thermal expansion and good forgeability. The alloy takes on an attractive dark gray appearance when anodized which may be desirable in architectural applications. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-305. Producer or source: Various aluminum companies.

Low-Pressure, High-Temperature Oxidation of Tungsten

JOM ◽  
1961 ◽  
Vol 13 (7) ◽  
pp. 490-493 ◽  
Author(s):  
R. A. Perkins ◽  
D. D. Crooks
Keyword(s):  
High Temperature ◽  
High Temperature Oxidation ◽  
Low Pressure ◽  
Temperature Oxidation

scholarly journals Effects of Ni Additions on the High Temperature Expansion, Melting and Oxidation Behaviors of Cobalt-Based Superalloys

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 173
Author(s):  
Patrice Berthod ◽  
Lionel Aranda ◽  
Jean-Paul Gomis
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Mechanical Analysis ◽  
Scanning Calorimetry ◽  
Beneficial Effects ◽  
Ni Addition ◽  
High Temperature Expansion ◽  
High Fraction ◽  
Thermal Analysis Techniques ◽  
Ni Additions

Nickel is often added to cobalt-based superalloys to stabilize their austenitic structure. In this work the effects of Ni on several high temperature properties of a chromium-rich cobalt-based alloy reinforced by high fraction of TaC carbides are investigated. Different thermal analysis techniques are used: differential scanning calorimetry (DSC), thermo-mechanical analysis (TMA) and thermogravimetry (TG). Results show that the progressive addition of nickel did not induce great modifications of microstructure, refractoriness or thermal expansion. However, minor beneficial effects were noted, including reduction of the melting temperature range and slight decrease in thermal expansion coefficient. The most important improvement induced by Ni addition concerns the hot oxidation behavior. In this way, introducing several tens wt % Ni in this type of cobalt-based alloy may be recommended.

Sign in / Sign up

Export Citation Format

Share Document