scholarly journals ZnFe2O4-TiO2Nanoparticles within Mesoporous MCM-41

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Aidong Tang ◽  
Yuehua Deng ◽  
Jiao Jin ◽  
Huaming Yang
Keyword(s):  
Sol Gel ◽  
Rutile Phase ◽  
Band Gap Energy ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Agglomeration Of Nanoparticles ◽  
Adsorption Desorption ◽  
Mcm 41

A novel nanocomposite ZnFe2O4-TiO2/MCM-41 (ZTM) was synthesized by a sol-gel method and characterized through X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), N2adsorption-desorption, Raman spectroscopy, and ultraviolet visible (UV-vis) spectrophotometry. The results confirmed the incorporation of ZnFe2O4-TiO2nanoparticles inside the pores of the mesoporous MCM-41 host without destroying its integrity. ZnFe2O4nanoparticles can inhibit the transformation of anatase into rutile phase of TiO2. Incorporation of ZnFe2O4-TiO2within MCM-41 avoided the agglomeration of nanoparticles and reduced the band gap energy of TiO2to enhance its visible light photocatalytic activity. UV-vis absorption edges of ZTM nanocomposites redshifted with the increase of Zn/Ti molar ratio. The nanocomposite approach could be a potential choice for enhancing the photoactivity of TiO2, indicating an interesting application in the photodegradation and photoelectric fields.

Catalytic Activity of Ag-Co-MCM-41 for Liquid-Phase Selective Oxidation of Styrene to Benzaldehyde

2020 ◽  
Vol 20 (3) ◽  
pp. 1670-1677 ◽  
Author(s):  
Tingshun Jiang ◽  
Guofang Gao ◽  
Cheng Yang ◽  
YuLin Mao ◽  
Minglan Fang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Liquid Phase ◽  
Molar Ratio ◽  
Oxidizing Agent ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Adsorption Desorption ◽  
Temperature Time ◽  
Mcm 41

A series of Ag-Co-MCM-41 with different metal loadings have been synthesized through the hydrothermal method. All the prepared catalysts were characterized by N2 adsorption–desorption, X-ray diffraction analysis, transmission electron microscopy. The results revealed that the structure of MCM-41 was well preserved and Ag and Co have been introduced successfully into the mesoporous channels of MCM-41. The liquid-phase catalytic oxidation of styrene on these catalysts was investigated using H2O2 as an oxidizing agent and acetone as a solvent in thermostatic water bath. The influence of metal loading, the catalyst dose, temperature, time and styrene/oxidant molar ratio on the conversion of styrene and yield and selectivity of benzaldehyde was investigated. Also, the reusability of the catalysts was evaluated.

scholarly journals Effect of the Amount of Water in the Synthesis of B-TiO2: Orange II Photodegradation

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
M. May-Lozano ◽  
G. M. Ramos-Reyes ◽  
R. López-Medina ◽  
S. A. Martínez-Delgadillo ◽  
J. Flores-Moreno ◽  
...  
Keyword(s):  
Surface Area ◽  
Sol Gel ◽  
Rutile Phase ◽  
Band Gap Energy ◽  
Molar Ratio ◽  
Orange Ii ◽  
X Ray Diffraction ◽  
X Ray ◽  
Boron Doped ◽  
Excess Water

A series of boron-doped TiO2 photocatalysts (2% B-TiO2) with different water/alkoxide molar ratio were synthesized by conventional sol-gel method. The prepared samples were characterized by BET measurement, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIRS), and diffuse-reflectance UV-vis. The phase anatase was present, but unexpectedly a small amount of rutile phase was formed with low and excess water in the synthesis. Additionally it has been observed that the increase in the molar ratio of water significantly increases the values of band gap energy and the specific surface area. Results showed that degradation of Orange II azo dye increases with surface area, particle size, boron, and water content in photocatalysis. The boron species were introduced in the tricoordinated form.

FeYO3@rGO nanocomposites: Synthesis, characterization and application in photooxidative degradation of atrazine under visible light

2021 ◽  
Vol 11 (5) ◽  
pp. 706-716
Author(s):  
Nada D. Al-Khthami ◽  
Tariq Altalhi ◽  
Mohammed Alsawat ◽  
Mohamed S. Amin ◽  
Yousef G. Alghamdi ◽  
...  
Keyword(s):  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Bandgap Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Structural Surface ◽  
Adsorption Desorption

Different organic pollutants have been remediated photo catalytically by applying perovskite photocatalysts. Atrazine (ATR) is a pesticide commonly detected as a pollutant in drinking, surface and ground water. Herein, FeYO3@rGO heterojunction was synthesized and applied for photooxidation decomposition of ATR. First, FeYO 3nanoparticles (NPs) were prepared via routine sol-gel. After that, FeYO3 NPs were successfully incorporated with different percentages (5, 10, 15 and 20 wt.%) of reduced graphene oxide (rGO) in the synthesis of novel FeYO3@rGO photocatalyst. Morphological, structural, surface, optoelectrical and optical characteristics of constructed materials were identified via X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Transmission electron microscopy (TEM), adsorption/desorption isotherms, diffusive reflectance (DR) spectra, and photoluminescence response (PL). Furthermore, photocatalytic achievement of the constructed materials was evaluated via photooxidative degradation of ATR. Various investigations affirmed the usefulness of rGO incorporation on the advancement of formed photocatalysts. Actually, novel nanocomposite containing rGO (15 wt.%) possessed diminished bandgap energy, as well as magnified visible light absorption. Furthermore, such nanocomposite presented exceptional photocatalytic achievement when exposed to visible light as ATR was perfectly photooxidized over finite amount (1.6 g · L-1) from the optimized photocatalyst when illuminated for 30 min. The advanced photocatalytic performance of constructed heterojunctions could be accredited mainly to depressed recombination amid induced charges. The constructed FeYO3@rGO nanocomposite is labelled as efficient photocatalyst for remediation of herbicides from aquatic environments.

Preparation of Nanosized TiO2 Synthesized by Sol-Gel Pathway Using Ionic Liquid as Assistant and its Photocatalytic Activities

2012 ◽  
Vol 535-537 ◽  
pp. 2240-2244
Author(s):  
Wei Wei ◽  
Chang Shun Yu ◽  
Shao Jun Wang ◽  
Qing Da An
Keyword(s):  
Ionic Liquid ◽  
Diffuse Reflectance ◽  
Sol Gel ◽  
Rutile Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Photocatalytic Activities ◽  
Average Size ◽  
Nanosized Tio2

Nanosized TiO2 particles were synthesized by sol-gel method using ionic liquid as assistant. The samples were characterized by UV-vis diffuse reflectance spectra, X-ray diffraction (XRD), transmission electron microscopy (TEM). It was shown that the phase detectable was mainly rutile phase with uniform sphericity and the average size was 10nm. Along with the rise of sintering temperature, grain diameter became bigger. The photocatalytic activities of nanosized TiO2 were evaluated by the reduction yield in the presence of CO2 and water. The result showed that TiO2 catalysts has efficient photocatalytic activities, of which made with [OMIM]BF4 displayed the highest photocatalytic active in the experiment.

Comparison of TiO2/RH-MCM-41 and TiO2/TEOS-MCM-41 Hybrid Catalysts in Characteristics and Photodegradation of Tetramethylammonium

2010 ◽  
Vol 93-94 ◽  
pp. 22-26 ◽  
Author(s):  
Surachai Artkla ◽  
Won Yong Choi ◽  
Jatuporn Wittayakun
Keyword(s):  
Irradiation Time ◽  
Catalytic Performance ◽  
X Ray Diffraction ◽  
N2 Adsorption ◽  
X Ray ◽  
Transmission Electron ◽  
Photocatalytic Activities ◽  
Adsorption Desorption ◽  
Two Hybrid ◽  
Mcm 41

This work compared properties and catalytic performance of two hybrid photocatalysts, TiO2/RH-MCM-41 and TiO2/TEOS-MCM-41 prepared by loading nanoparticles of TiO2 (10 wt.%) on MCM-41 synthesized with rice husk silica and tetraethyl orthosilicate respectively. The supports and catalysts were characterized by X-ray diffraction, N2 adsorption-desorption, transmission electron microscopy and zeta potential. The photocatalytic activities of the TiO2/RH-MCM-41 and TiO2/TEOS-MCM-41 for the degradation of tetramethylammonium (TMA) in aqueous slurry were similar with a complete conversion after irradiation time of 90 min at pH 7.

Synthesis and Characterization of Mesoporous Molecular Sieve Al-MCM-41 Using Kaolin as Raw Material

2013 ◽  
Vol 779-780 ◽  
pp. 201-204
Author(s):  
Miao Li ◽  
Hong Wang ◽  
Xian Qing Li ◽  
Jin Rong Liu
Keyword(s):  
Molecular Sieve ◽  
Nitrogen Adsorption ◽  
Mesoporous Molecular Sieve ◽  
Raw Material ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Adsorption Desorption ◽  
Calcined Kaolin ◽  
Mcm 41

Ordered hexagonally mesoporous molecular sieve Al-MCM-41 with Si/Al (atom) ratio=9 was prepared by hydrothermal synthesis using raw kaolin. X-ray diffraction (XRD), Nitrogen adsorption desorption, Transmission Electron Microscope (TEM) and Energy Dispersive X-ray Detector (EDX) were employed to characterise raw kaolin, calcined kaolin, as-synthesized and calcined Al-MCM-41. The results indicated that characteristic reflections of raw kaolin disappeared after calcination, both of as-synthesized and calcined Al-MCM-41 exhibited well ordered hexagonally mesoporous molecular sieve structure.

Antimony-Doped SnO2 Nanoparticles with Controlled Doping Level via Nonaqueous Sol-Gel Procedure

2013 ◽  
Vol 745-746 ◽  
pp. 685-689
Author(s):  
Jun Yan Wu ◽  
Fei Chen ◽  
Qiang Shen ◽  
Lian Meng Zhang
Keyword(s):  
Citric Acid ◽  
Photoelectron Spectroscopy ◽  
Doping Level ◽  
Sol Gel ◽  
Processing Parameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Adsorption Desorption ◽  
Controlled Doping

Antimony-doped tin oxide (ATO) nanoparticles with controlled doping level were prepared by a nonaqueous solution route, using alcohol as the solvent, citric acid as an agent, tin (IV) tetrachloride as tin source and antimony (III) chlorideas as antimony sources. As-synthesized samples were characterized by Thermogravimetric analysis (TGA), powder X-ray diffraction (XRD), transmission electron micrographs (TEM), N2 adsorption-desorption isotherms, and X-ray photoelectron spectroscopy (XPS). The results showed that the content of citric acid was the most important processing parameter which was largely governing the reaction course and the complete incorporation of Sb. When the citric acid to metal mol ratio was 2, the particles were the highly crystallized ATO nanoparticles of about 20nm and the Sb atoms were indeed incorporated into the SnO2 crystal structure (cassiterite SnO2).

Zn0.9Co0.1O/ MCM-41 Composite: Synthesis and Magnetism

2011 ◽  
Vol 266 ◽  
pp. 80-83
Author(s):  
W. B. Liu ◽  
Ying Tang Zhang ◽  
X. X. Li ◽  
S. X. Liu ◽  
Z. Y. Chen ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Diluted Magnetic Semiconductors ◽  
Pore Diameter ◽  
Magnetic Semiconductors ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Diluted Magnetic ◽  
Mcm 41

Cobalt doped zinc oxide diluted magnetic semiconductors (DMSs) were assembled in MCM-41 template by sol-gel method. Samples were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), physisorption, as well as the magnetism measurement. It was found that the wurtzite symmetry of the MCM-41 pores was not changed while the pore diameter became smaller after the DMSs deposited into the pores. The Zn0.9Co0.1O-MCM-41 presents a superparamagnetic behavior between 80K and 300K, while Zn0.9TM0.1O-MCM-41 (TM=Mn, Fe, Ni) samples are paramagnetic at the same temperature range.

Facile Sol-Gel Synthesis of Mesoporous TiO2 in Ionic Liquids

2013 ◽  
Vol 389 ◽  
pp. 53-56
Author(s):  
Shu Guo ◽  
Sheng Xu Lu ◽  
Hui Ding ◽  
Zai Feng Shi
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Sol Gel ◽  
Rutile Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Carboxylate Groups ◽  
Transmission Electron ◽  
Xrd Patterns ◽  
Sol Gel Synthesis

The mesoporous TiO2 particles was conveniently prepared in a room temperature ionic liquid (RTILs) of 1, 3-di-(3-propionyloxy) imdazolium tetrafluoroborate [DiprCOOBF4 system. The obtained materials were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), and N2 adsorptiondesorption analysis. XRD patterns revealed that only rutile phase is formed in the RTILs. The TEM micrographs as well as N2 adsorptiondesorption measurements show that the prepared products exhibited wormlike pore structures. The FTIR (Fourier Transform Infrared Spectra) demonstrate the carboxylate groups attach via bidentate or bridging coordination to the TiO2 surface.

scholarly journals Study on the preparation of amine-modified silicate MCM-41 adsorbent and its H2S removal performance

2019 ◽  
Vol 45 ◽  
pp. 146867831982590
Author(s):  
Jiaojing Zhang ◽  
Hua Song ◽  
Yanguang Chen ◽  
Tianzhen Hao ◽  
Feng Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Removal Rate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Regeneration Experiment ◽  
Adsorption Desorption ◽  
Mcm 41 ◽  
Scanning Electron

A series of APTMS ((3-aminopropyl)trimethoxysilane)-modified silicate MCM-41 adsorbents ( x-APTMS/MCM-41, x is the volume of APTMS per 1 g of silicate MCM-41) with different APTMS contents was prepared, and the effects of APTMS content on the desulfurization performance of the APTMS/MCM-41 adsorbents were studied in a fixed adsorption bed using H2S and N2 mixture as a model gas. The as-prepared adsorbents were characterized by X-ray diffraction analysis, N2 adsorption–desorption, Fourier transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, and energy-dispersive spectroscopy. The results showed that all the APTMS-modified x-APTMS/MCM-41 adsorbents retained the mesoporous silica structure of MCM-41. The Brunauer–Emmett–Teller-specific surface area of x-APTMS/MCM-41 increased slightly with increasing x at first and then decreased with further increasing APTMS content. The H2S removal performances of x-APTMS/MCM-41 adsorbents decreased in the order 0.6-APTMS/MCM-41 > 0.7-APTMS/MCM-41 > 0.5-APTMS/MCM-41 > 0.4-APTMS/MCM-41 > 0.8-APTMS/MCM-41. At x = 0.6, the maximum H2S removal rate of 54.2% and H2S saturated capacity of 134.4 mg g−1 were observed. The regeneration experiment of 0.6-APTMS/MCM-41 adsorbent after three times regeneration at 423 K for 3 h in nitrogen confirmed that it possessed a good regenerability.

Sign in / Sign up

Export Citation Format

Share Document