scholarly journals Low-Cost, Modular Modification to a Desktop 3D Printer for General Purpose Gel/Paste Extrusion & Direct Ink Writing

2021 ◽  
Author(s):  
D. J. Leech ◽  
S. Lightfoot ◽  
D. Huson ◽  
A. Stratakos
Keyword(s):  
Low Cost ◽  
Biological Materials ◽  
General Purpose ◽  
3D Printer ◽  
Syringe Pump ◽  
Selective Deposition ◽  
Direct Ink Writing ◽  
Driven System ◽  
Paste Extrusion

AbstractWe propose a design for a simple paste extruder modification that can be used for the selective deposition and patterning of gels and pastes, using a desktop 3D printer as the primary platform. This technology has found use with a variety of materials in seemingly disparate fields, including the printing of ceramics, food and biological materials, each with a variety of material-specific solutions to enhance printability. However, we focus on a syringe-pump driven system that is simple, low-cost, modular, easily assembled and highly modifiable with a low barrier of entry in order to maximise the generalisability and range of printable materials.

AISI 1030

Alloy Digest ◽  
1983 ◽  
Vol 32 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Cost ◽  
Heat Treating ◽  
Plain Carbon Steel ◽  
General Purpose ◽  
Fine Grain ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract AISI 1030 is a plain carbon steel containing nominally 0.30% carbon. It is used in the hot-rolled, normalized, oil-quenched-and-tempered or water-quenched-and-tempered conditions for general-purpose engineering and construction. It provides medium strength and toughness at low cost. Among its many uses are axles, bolts, gears and building sections. All data are on a single heat of fine-grain steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-94. Producer or source: Carbon and alloy steel mills.

AISI 1040

Alloy Digest ◽  
1971 ◽  
Vol 20 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Cost ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract AISI 1040 is a medium-carbon steel used in the hot-rolled, normalized, oil quenched and tempered or water quenched and tempered condition for general purpose engineering and construction. It provides medium strength and toughness at low cost. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-41. Producer or source: Carbon and alloy steel mills.

SAE 1037

Alloy Digest ◽  
1979 ◽  
Vol 28 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Low Cost ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract SAE 1037 is a carbon steel that provides medium strength and medium toughness at low cost. It is used in the hot-rolled, normalized, oil-quenched-and-tempered and water-quenched-and-tempered conditions. This medium-carbon steel is used for construction and for general-purpose engineering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-76. Producer or source: Carbon steel mills.

SAE 1039

Alloy Digest ◽  
1977 ◽  
Vol 26 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Low Cost ◽  
Manganese Content ◽  
Heat Treating ◽  
General Purpose ◽  
Carbon Steels ◽  
The Other ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract SAF 1039 steel can be used in the hot-rolled, normalized, oil-quenched-and-tempered or water-quenched-and-tempered condition for general-purpose construction and engineering. Its manganese content is a little higher than some of the other standard carbon steels with comparable carbon levels; this gives it slightly higher hardenability and hardness. It provides medium strength and toughness at low cost. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-66. Producer or source: Carbon steel mills.

A low-cost, large-volume general purpose water sampler

2005 ◽  
Vol 33 (1) ◽  
pp. 123-128
Author(s):  
R. P. Grayson ◽  
A. J. Plater
Keyword(s):  
Large Volume ◽  
Low Cost ◽  
General Purpose ◽  
Water Sampler

scholarly journals Prediction of Fruity Aroma Intensity and Defect Presence in Virgin Olive Oil Using an Electronic Nose

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2298
Author(s):  
Pablo Cano Marchal ◽  
Chiara Sanmartin ◽  
Silvia Satorres Martínez ◽  
Juan Gómez Ortega ◽  
Fabio Mencarelli ◽  
...  
Keyword(s):  
Olive Oil ◽  
Low Cost ◽  
Virgin Olive Oil ◽  
General Purpose ◽  
Quality Parameter ◽  
Lasso Regression ◽  
Virgin Olive Oils ◽  
Electronic Noses ◽  
Olive Oils ◽  
Instrumental Technique

The organoleptic profile of a Virgin Olive Oil is a key quality parameter that is currently obtained by human sensory panels. The development of an instrumental technique capable of providing information about this profile quickly and online is of great interest. This work employed a general purpose e-nose, in lab conditions, to predict the level of fruity aroma and the presence of defects in Virgin Olive Oils. The raw data provided by the e-nose were used to extract a set of features that fed a regressor to predict the level of fruity aroma and a classifier to detect the presence of defects. The results obtained were a mean validation error of 0.5 units for the prediction of fruity aroma using lasso regression; and 88% accuracy for the defect detection using logistic regression. Finally, the identification of two out of ten specific sensors of the e-nose that can provide successful results paves the way to the design of low-cost specific electronic noses for this application.

The Use of Microcomputer Simulations in Undergraduate Neurophysiology Experiments

1987 ◽  
Vol 14 (3) ◽  
pp. 134-140 ◽  
Author(s):  
K.A. Clarke
Keyword(s):  
Low Cost ◽  
Animal Experiments ◽  
Theoretical Background ◽  
General Purpose ◽  
Microcomputer System ◽  
Laboratory Equipment ◽  
Teaching Objectives ◽  
Compound Action Potentials ◽  
Experimental Management ◽  
And Performance

Practical classes in neurophysiology reinforce and complement the theoretical background in a number of ways, including demonstration of concepts, practice in planning and performance of experiments, and the production and maintenance of viable neural preparations. The balance of teaching objectives will depend upon the particular group of students involved. A technique is described which allows the embedding of real compound action potentials from one of the most basic introductory neurophysiology experiments—frog sciatic nerve, into interactive programs for student use. These retain all the elements of the “real experiment” in terms of appearance, presentation, experimental management and measurement by the student. Laboratory reports by the students show that the experiments are carefully and enthusiastically performed and the material is well absorbed. Three groups of student derive most benefit from their use. First, students whose future careers will not involve animal experiments do not spend time developing dissecting skills they will not use, but more time fulfilling the other teaching objectives. Second, relatively inexperienced students, struggling to produce viable neural material and master complicated laboratory equipment, who are often left with little time or motivation to take accurate readings or ponder upon neurophysiological concepts. Third, students in institutions where neurophysiology is taught with difficulty because of the high cost of equipment and lack of specific expertise, may well have access to a low cost general purpose microcomputer system.

scholarly journals SpheroidPicker for automated 3D cell culture manipulation using deep learning

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Istvan Grexa ◽  
Akos Diosdi ◽  
Maria Harmati ◽  
Andras Kriston ◽  
Nikita Moshkov ◽  
...  
Keyword(s):  
Cell Culture ◽  
Precision Medicine ◽  
High Throughput Screening ◽  
Standard Sample ◽  
Ex Vivo ◽  
Low Cost ◽  
3D Cell Culture ◽  
Syringe Pump ◽  
Experimental Conditions ◽  
The Past

AbstractRecent statistics report that more than 3.7 million new cases of cancer occur in Europe yearly, and the disease accounts for approximately 20% of all deaths. High-throughput screening of cancer cell cultures has dominated the search for novel, effective anticancer therapies in the past decades. Recently, functional assays with patient-derived ex vivo 3D cell culture have gained importance for drug discovery and precision medicine. We recently evaluated the major advancements and needs for the 3D cell culture screening, and concluded that strictly standardized and robust sample preparation is the most desired development. Here we propose an artificial intelligence-guided low-cost 3D cell culture delivery system. It consists of a light microscope, a micromanipulator, a syringe pump, and a controller computer. The system performs morphology-based feature analysis on spheroids and can select uniform sized or shaped spheroids to transfer them between various sample holders. It can select the samples from standard sample holders, including Petri dishes and microwell plates, and then transfer them to a variety of holders up to 384 well plates. The device performs reliable semi- and fully automated spheroid transfer. This results in highly controlled experimental conditions and eliminates non-trivial side effects of sample variability that is a key aspect towards next-generation precision medicine.

scholarly journals Accuracy Verification of an Anatomical Model Manufactured Using Low-Cost Additive Production

2021 ◽  
Vol 11 (2) ◽  
pp. 594
Author(s):  
Teodor Tóth ◽  
Patrik Varga ◽  
Branko Štefanovič ◽  
Lucia Bednarčíková ◽  
Marek Schnitzer ◽  
...  
Keyword(s):  
Surface Coverage ◽  
Reference Model ◽  
Low Cost ◽  
Cervical Vertebra ◽  
3D Printer ◽  
3D Scanner ◽  
Entire Surface ◽  
Additive Production ◽  
The Third ◽  
And Training

The paper deals with the separation of the third cervical vertebra using the software VGStudio MAX, Mimics, and inVesalius. During the separation, various parameters of the threshold were used to determine the effect. The comparison of models from Mimics and inVesalius to VGStudio MAX showed that the cumulative variance distribution for 95% surface coverage is less than 0.935 mm. When comparing medically oriented software, Mimics and inVesalius, the deviation was less than 0.356 mm. The model was made of polylactic acid (PLA) material on a low-cost 3D printer, Prusa i3 MK2.5 MMU1. The printed model was scanned by four scanners: Artec Eva, 3Shape D700, Steinbichler Comet L3D, and Creaform EXAscan. The outputs from the scanners were compared to the reference model (standard tessellation language (STL) model for 3D printing) as well as to the scanner with the best accuracy (3Shape). Compared to the publications below, the analysis of deviations was evaluated on the entire surface of the model and not on selected dimensions. The cumulative variance distribution for comparing the output from the 3D scanner with the reference model, as well as comparing the scanners, shows that the deviation for 95% of the surface coverage is at the level of 0.300 mm. Since the model of the vertebra is planned for education and training, the used software and technologies are suitable for use in the design and the production process.

Sign in / Sign up

Export Citation Format

Share Document