scholarly journals HLA*PRG:LA – HLA typing from linearly projected graph alignments

2018 ◽  
Author(s):  
Alexander T Dilthey ◽  
Alexander J Mentzer ◽  
Raphael Carapito ◽  
Clare Cutland ◽  
Nezih Cereb ◽  
...  

AbstractSummary:HLA*PRG:LA implements a new graph alignment model for HLA type inference, based on the projection of linear alignments onto a variation graph. It enables accurate HLA type inference from whole-genome (99% accuracy) and whole-exome (93% accuracy) Illumina data; from long-read Oxford Nanopore and Pacific Biosciences data (98% accuracy for whole-genome and targeted data); and from genome assemblies. Computational requirements for a typical sample vary between 0.7 and 14 CPU hours per sample.Availability and Implementation:HLA*PRG:LA is implemented in C++ and Perl and freely available from https://github.com/DiltheyLab/HLA-PRG-LA (GPL v3).Contact:[email protected] informationSupplementary data are available online.

2019 ◽  
Vol 35 (21) ◽  
pp. 4394-4396 ◽  
Author(s):  
Alexander T Dilthey ◽  
Alexander J Mentzer ◽  
Raphael Carapito ◽  
Clare Cutland ◽  
Nezih Cereb ◽  
...  

Abstract Summary HLA*LA implements a new graph alignment model for human leukocyte antigen (HLA) type inference, based on the projection of linear alignments onto a variation graph. It enables accurate HLA type inference from whole-genome (99% accuracy) and whole-exome (93% accuracy) Illumina data; from long-read Oxford Nanopore and Pacific Biosciences data (98% accuracy for whole-genome and targeted data) and from genome assemblies. Computational requirements for a typical sample vary between 0.7 and 14 CPU hours per sample. Availability and implementation HLA*LA is implemented in C++ and Perl and freely available as a bioconda package or from https://github.com/DiltheyLab/HLA-LA (GPL v3). Supplementary information Supplementary data are available at Bioinformatics online.


2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Jean-Marc Aury ◽  
Benjamin Istace

Abstract Single-molecule sequencing technologies have recently been commercialized by Pacific Biosciences and Oxford Nanopore with the promise of sequencing long DNA fragments (kilobases to megabases order) and then, using efficient algorithms, provide high quality assemblies in terms of contiguity and completeness of repetitive regions. However, the error rate of long-read technologies is higher than that of short-read technologies. This has a direct consequence on the base quality of genome assemblies, particularly in coding regions where sequencing errors can disrupt the coding frame of genes. In the case of diploid genomes, the consensus of a given gene can be a mixture between the two haplotypes and can lead to premature stop codons. Several methods have been developed to polish genome assemblies using short reads and generally, they inspect the nucleotide one by one, and provide a correction for each nucleotide of the input assembly. As a result, these algorithms are not able to properly process diploid genomes and they typically switch from one haplotype to another. Herein we proposed Hapo-G (Haplotype-Aware Polishing Of Genomes), a new algorithm capable of incorporating phasing information from high-quality reads (short or long-reads) to polish genome assemblies and in particular assemblies of diploid and heterozygous genomes.


2017 ◽  
Vol 5 (42) ◽  
Author(s):  
S. Wesley Long ◽  
Sarah E. Linson ◽  
Matthew Ojeda Saavedra ◽  
Concepcion Cantu ◽  
James J. Davis ◽  
...  

ABSTRACT In a study of 1,777 Klebsiella strains, we discovered KPN1705, which was distinct from all recognized Klebsiella spp. We closed the genome of strain KPN1705 using a hybrid of Illumina short-read and Oxford Nanopore long-read technologies. For this novel species, we propose the name Klebsiella quasivariicola sp. nov.


2020 ◽  
Author(s):  
Bernard Y Kim ◽  
Jeremy Wang ◽  
Danny E. Miller ◽  
Olga Barmina ◽  
Emily K. Delaney ◽  
...  

Over 100 years of studies in Drosophila melanogaster and related species in the genus Drosophila have facilitated key discoveries in genetics, genomics, and evolution. While high-quality genome assemblies exist for several species in this group, they only encompass a small fraction of the genus. Recent advances in long read sequencing allow high quality genome assemblies for tens or even hundreds of species to be generated. Here, we utilize Oxford Nanopore sequencing to build an open community resource of high-quality assemblies for 101 lines of 95 drosophilid species encompassing 14 species groups and 35 sub-groups with an average contig N50 of 10.5 Mb and greater than 97% BUSCO completeness in 97/101 assemblies. These assemblies, along with detailed wet lab protocol and assembly pipelines, are released as a public resource and will serve as a starting point for addressing broad questions of genetics, ecology, and evolution within this key group.


2021 ◽  
Author(s):  
Arang Rhie ◽  
Ann Mc Cartney ◽  
Kishwar Shafin ◽  
Michael Alonge ◽  
Andrey Bzikadze ◽  
...  

Abstract Advances in long-read sequencing technologies and genome assembly methods have enabled the recent completion of the first Telomere-to-Telomere (T2T) human genome assembly, which resolves complex segmental duplications and large tandem repeats, including centromeric satellite arrays in a complete hydatidiform mole (CHM13). Though derived from highly accurate sequencing, evaluation revealed that the initial T2T draft assembly had evidence of small errors and structural misassemblies. To correct these errors, we designed a novel repeat-aware polishing strategy that made accurate assembly corrections in large repeats without overcorrection, ultimately fixing 51% of the existing errors and improving the assembly QV to 73.9. By comparing our results to standard automated polishing tools, we outline common polishing errors and offer practical suggestions for genome projects with limited resources. We also show how sequencing biases in both PacBio HiFi and Oxford Nanopore Technologies reads cause signature assembly errors that can be corrected with a diverse panel of sequencing technologies


2018 ◽  
Author(s):  
Liang Hu ◽  
Fan Liang ◽  
Dehua Cheng ◽  
Zhiyuan Zhang ◽  
Guoliang Yu ◽  
...  

AbstractStructural variants (SVs) in genomes, including translocations, inversions, insertions, deletions and duplications, remain difficult to be detected reliably by traditional genomic technologies. In particular, balanced translocations and inversions cannot be detected by microarrays since they do not alter chromosome copy numbers; they cannot be reliably detected by short-read sequencing either, since many breakpoints are located within repetitive regions of the genome that are unmappable by short reads. However, the detection and the precise localization of breakpoints at the nucleotide level are important to study the genetic causes in patients carrying balanced translocations or inversions. Long-read sequencing techniques, such as the Oxford Nanopore Technology (ONT), may detect these SVs in a more direct, efficient and accurate manner. In this study, we applied whole-genome long-read sequencing on the Oxford Nanopore GridION sequencer to detect the breakpoints from 6 carriers of balanced translocations and one carrier of inversion, where SVs had initially been detected by karyotyping at the chromosome level. The results showed that all the balanced translocations were detected with ∼10X coverage and were consistent with the karyotyping results. PCR and Sanger sequencing confirmed 8 of the 14 breakpoints to single base resolution, yet other breakpoints cannot be refined to single-base due to their localization at highly repetitive regions or pericentromeric regions, or due to the possible presence of local deletions/duplications. Our results indicate that low-coverage whole-genome sequencing is an ideal tool for the precise localization of most translocation breakpoints and may provide haplotype information on the breakpoint-linked SNPs, which may be widely applied in SV detection, therapeutic monitoring, assisted reproduction technology (ART) and preimplantation genetic diagnosis (PGD).


2020 ◽  
Author(s):  
Kumar Paritosh ◽  
Akshay Kumar Pradhan ◽  
Deepak Pental

AbstractBrassica nigra (BB), also called black mustard, is grown as a condiment crop in India. B. nigra represents the B genome of U’s triangle and is one of the progenitor species of B. juncea (AABB), an important oilseed crop of the Indian subcontinent. We report here a highly contiguous genome assembly of B. nigra variety Sangam. The genome assembly has been carried out using Oxford Nanopore long-read sequencing and optical mapping. The resulting chromosome-scale assembly is a significant improvement over the previous draft assemblies of B. nigra; five out of the eight pseudochromosomes were represented by one scaffold each. The assembled genome was annotated for the transposons, centromeric repeats, and genes. The B. nigra genome was compared with the recently available contiguous genome assemblies of B. rapa (AA), B. oleracea (CC), and B. juncea (AABB). Based on the maximum homology among the three diploid genomes of U’s triangle, we propose a new nomenclature for B. nigra pseudochromosomes, taking the B. rapa pseudochromosome nomenclature as the reference.


2021 ◽  
Author(s):  
Brian W Strehlow ◽  
Astrid Schuster ◽  
Warren R Francis ◽  
Donald E Canfield

Objectives: These data were collected to generate a novel reference metagenome for the sponge Halichondria panicea and its microbiome for subsequent differential expression analyses. Data description: These data include raw sequences from four separate sequencing runs of the metagenome of a single individual of H. panicea - one Illumina MiSeq (2x300 bp, paired-end) run and three Oxford Nanopore Technologies (ONT) long-read sequencing runs, generating 53.8 and 7.42 Gbp respectively. Comparing assemblies of Illumina, ONT and an Illumina-ONT hybrid revealed the hybrid to be the best assembly, comprising 163 Mbp in 63,555 scaffolds (N50: 3,084). This assembly, however, was still highly fragmented and only contained 52% of core metazoan genes (with 77.9% partial genes), so it was also not complete. However, this sponge is an emerging model species for field and laboratory work, and there is considerable interest in genomic sequencing of this species. Although the resultant assemblies from the data presented here are suboptimal, this data note can inform future studies by providing an estimated genome size and coverage requirements for future sequencing, sharing additional data to potentially improve other suboptimal assemblies of this species, and outlining potential limitations and pitfalls of the combined Illumina and ONT approach to novel genome sequencing.


2021 ◽  
Author(s):  
Brandon K. B. Seah ◽  
Estienne C. Swart

Ciliates are single-celled eukaryotes that eliminate specific, interspersed DNA sequences (internally eliminated sequences, IESs) from their genomes during development. These are challenging to annotate and assemble because IES-containing sequences are much less abundant in the cell than those without, and IES sequences themselves often contain repetitive and low-complexity sequences. Long read sequencing technologies from Pacific Biosciences and Oxford Nanopore have the potential to reconstruct longer IESs than has been possible with short reads, and also the ability to detect correlations of neighboring element elimination. Here we present BleTIES, a software toolkit for detecting, assembling, and analyzing IESs using mapped long reads. Availability and implementation: BleTIES is implemented in Python 3. Source code is available at https://github.com/Swart-lab/bleties (MIT license), and also distributed via Bioconda. Contact: [email protected] Supplementary information: Benchmarking of BleTIES with published sequence data.


2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Caroline Belser ◽  
Franc-Christophe Baurens ◽  
Benjamin Noel ◽  
Guillaume Martin ◽  
Corinne Cruaud ◽  
...  

AbstractLong-read technologies hold the promise to obtain more complete genome assemblies and to make them easier. Coupled with long-range technologies, they can reveal the architecture of complex regions, like centromeres or rDNA clusters. These technologies also make it possible to know the complete organization of chromosomes, which remained complicated before even when using genetic maps. However, generating a gapless and telomere-to-telomere assembly is still not trivial, and requires a combination of several technologies and the choice of suitable software. Here, we report a chromosome-scale assembly of a banana genome (Musa acuminata) generated using Oxford Nanopore long-reads. We generated a genome coverage of 177X from a single PromethION flowcell with near 17X with reads longer than 75 kbp. From the 11 chromosomes, 5 were entirely reconstructed in a single contig from telomere to telomere, revealing for the first time the content of complex regions like centromeres or clusters of paralogous genes.


Sign in / Sign up

Export Citation Format

Share Document