scholarly journals Real-time contextual feedback for closed-loop control of navigation

2018 ◽  
Author(s):  
Judith Lim ◽  
Tansu Celikel
Keyword(s):  
Real Time ◽  
Animal Behavior ◽  
Neural Activity ◽  
High Speed ◽  
Closed Loop ◽  
Closed Loop Control ◽  
Neural Basis ◽  
Loop Control ◽  
Virtual Target ◽  
Close Loop Control

AbstractObjectiveClose-loop control of brain and behavior will benefit from real-time detection of behavioral events to enable low-latency communication with peripheral devices. In animal experiments, this is typically achieved by using sparsely distributed (embedded) sensors that detect animal presence in select regions of interest. High-speed cameras provide high-density sampling across large arenas, capturing the richness of animal behavior, however, the image processing bottleneck prohibits real-time feedback in the context of rapidly evolving behaviors.ApproachHere we developed an open-source software, named PolyTouch, to track animal behavior in large arenas and provide rapid close-loop feedback in ~5.7 ms, ie. average latency from the detection of an event to analog stimulus delivery, e.g. auditory tone, TTL pulse, when tracking a single body. This stand-alone software is written in JAVA. The included wrapper for MATLAB provides experimental flexibility for data acquisition, analysis and visualization.Main resultsAs a proof-of-principle application we deployed the PolyTouch for place awareness training. A user-defined portion of the arena was used as a virtual target; visit (or approach) to the target triggered auditory feedback. We show that mice develop awareness to virtual spaces, tend to stay shorter and move faster when they reside in the virtual target zone if their visits are coupled to relatively high stimulus intensity (≥49dB). Thus, close-loop presentation of perceived aversive feedback is sufficient to condition mice to avoid virtual targets within the span of a single session (~20min).SignificanceNeuromodulation techniques now allow control of neural activity in a cell-type specific manner in spiking resolution. Using animal behavior to drive closed-loop control of neural activity would help to address the neural basis of behavioral state and environmental context-dependent information processing in the brain.

A Playbook(trademark) for Real-Time, Closed-Loop Control

2005 ◽  
Author(s):  
Harry Funk ◽  
Robert Goldman ◽  
Christopher Miller ◽  
John Meisner ◽  
Peggy Wu
Keyword(s):  
Real Time ◽  
Closed Loop ◽  
Closed Loop Control ◽  
Loop Control

scholarly journals Multifunctional Neural Interfaces for Closed-Loop Control of Neural Activity

2017 ◽  
Vol 28 (12) ◽  
pp. 1703523 ◽  
Author(s):  
Christopher A. R. Chapman ◽  
Noah Goshi ◽  
Erkin Seker
Keyword(s):  
Neural Activity ◽  
Closed Loop ◽  
Neural Interfaces ◽  
Closed Loop Control ◽  
Loop Control

The Design of Monitoring System in Large Hydraulic Press Aiming at the Precise Closed-Loop Control

2014 ◽  
Vol 989-994 ◽  
pp. 3062-3069
Author(s):  
Heng Du ◽  
Bin Huang ◽  
Lin Wang ◽  
Shu Mei Chen
Keyword(s):  
Data Acquisition ◽  
Monitoring System ◽  
High Speed ◽  
Closed Loop ◽  
Hydraulic Press ◽  
Signal Acquisition ◽  
Closed Loop Control ◽  
Repeated Testing ◽  
Loop Control ◽  
The Status

In the research and development of the precise closed-loop control system in large hydraulic press, the touch screen and PLC are frequently applied to design, debug and test for the system. Though a better closed-loop control characteristic can be acquired after repeated testing by this way, the comprehensive state data of hydraulic press are unable to get, which leads to a long research cycle and also restricts the maintenance and upgrade with the equipment in the later period. In order to obtain the whole state information of hydraulic press easily and effectively, a monitor system of precise closed-loop control in large hydraulic press is designed. Based on reasonable cooperation of sensors and high-speed data-acquisition card, high-speed and precise signal acquisition is realized. In addition, data-acquisition software program is designed base on LabVIEW, it can achieve the functions of collecting, storing, displaying and analyzing data. Through the real measuring and analyzing on a certain large ceramic hydraulic press, the status of key parameters can be acquired effectively during the whole pressing process. So the monitoring system supplies the significant data basis to the precise closed-loop control, accelerates the design and development of high characteristic precise closed-loop control and also strongly supports to the maintenance and upgrade with the equipments in the later period.

Modeling and Closed-Loop Control of Stretch Bending of Aluminum Rectangular Tubes

2003 ◽  
Vol 125 (1) ◽  
pp. 113-119 ◽  
Author(s):  
Hong Zhu ◽  
Kim A. Stelson
Keyword(s):  
Experimental Data ◽  
Real Time ◽  
Control Algorithm ◽  
Closed Loop ◽  
Strain History ◽  
Closed Loop Control ◽  
Loop Control ◽  
Stretch Bending ◽  
Rectangular Tube ◽  
Rectangular Tubes

During stretch bending, considerable springback will occur after a tube has been plastically bent. To predict the springback, a simplified two-flange model for stretch bending of a rectangular tube has been developed in which the strain history has been considered. A comparison has been made between the springback predicted by this model and experimental data, which shows rough agreement. Based on this model, a real time closed-loop control algorithm is developed.

Controlling Nylon Dyeing by Dye and Chemical Metering

1997 ◽  
Vol 67 (8) ◽  
pp. 609-616 ◽  
Author(s):  
Ralph McGregor ◽  
Manpreet S. Arora ◽  
Warren J. Jasper
Keyword(s):  
Adaptive Control ◽  
Binary Mixture ◽  
Real Time ◽  
Closed Loop ◽  
Closed Loop Control ◽  
Good Reproducibility ◽  
Acid Dyes ◽  
Loop Control ◽  
Polyamide Fibers ◽  
The Individual

Closed-loop control of the dosing of dyes and chemicals is used to obtain an on-tone build-up of shade in dyeing polyamide fibers with a binary mixture of monosulfonated acid dyes. Computerized dosing pumps control the pH, the dyebath concentrations of the individual dyes, and the total sorption of each dye during the process. This real-time, closed-loop adaptive control yields good reproducibility and uniform shade build-up in a laboratory dyeing machine. It is possible to reuse a dyebath containing residual dyes and chemicals from a previous dyeing.

scholarly journals Real-Time Low-Cost Speed Monitoring and Control of Three-Phase Induction Motor via a Voltage/Frequency Control Approach

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Ali Hmidet ◽  
Olfa Boubaker
Keyword(s):  
Real Time ◽  
Induction Motor ◽  
Closed Loop ◽  
Low Cost ◽  
Closed Loop Control ◽  
Loop Control ◽  
Control Approach ◽  
Three Phase ◽  
Wide Range ◽  
Voltage Frequency

In this paper, a new design of a real-time low-cost speed monitoring and closed-loop control of the three-phase induction motor (IM) is proposed. The proposed solution is based on a voltage/frequency (V/F) control approach and a PI antiwindup regulator. It uses the Waijung Blockset which considerably alleviates the heaviness and the difficulty of the microcontroller’s programming task incessantly crucial for the implementation and the management of such complex applications. Indeed, it automatically generates C codes for many types of microcontrollers like the STM32F4 family, also used in this application. Furthermore, it offers a cost-effective design reducing the system components and increasing its efficiency. To prove the efficiency of the suggested design, not only simulation results are carried out for a wide range of variations in load and reference speed but also experimental assessment. The real-time closed-loop control performances are proved using the aMG SQLite Data Server via the UART port board, whereas Waijung WebPage Designer (W2D) is used for the web monitoring task. Experimental results prove the accuracy and robustness of the proposed solution.

scholarly journals An Intelligent Microwave Oven with Thermal Imaging and Temperature Recommendation Using Deep Learning

2020 ◽  
Vol 3 (1) ◽  
pp. 13 ◽  
Author(s):  
Tareq Khan
Keyword(s):  
Deep Learning ◽  
Real Time ◽  
Thermal Imaging ◽  
Closed Loop ◽  
Thermal Image ◽  
Microwave Oven ◽  
Closed Loop Control ◽  
Target Temperature ◽  
Thermal Camera ◽  
Loop Control

Whenever food in a microwave oven is heated, the user estimates the time to heat. This estimation can be incorrect, leading the food to be too hot or still cold. In this research, an intelligent microwave oven is designed. After the food is put into the microwave oven and the door is closed, it captures the image of the food, classifies the image and then suggests the food’s target temperature by learning from previous experiences, so the user does not have to recall the target food temperature each time the same food is warmed. The temperature of the food is measured using a thermal camera. The proposed microwave incorporates a display to show a real-time colored thermal image of the food. The microwave automatically stops the heating when the temperature of the food hits the target temperature using closed-loop control. The deep learning-based image classifier gradually learns the type of foods that are consumed in that household and becomes smarter in temperature recommendation. The system can classify and recommend target temperature with 93% accuracy. A prototype is developed using a microcontroller-based system and successfully tested.

Sign in / Sign up

Export Citation Format

Share Document