scholarly journals Practical Applications of Quantum Sensing: A Simple Method to Enhance the Sensitivity of Nitrogen-Vacancy-Based Temperature Sensors

2020 ◽  
Vol 13 (5) ◽  
Author(s):  
E. Moreva ◽  
E. Bernardi ◽  
P. Traina ◽  
A. Sosso ◽  
S. Ditalia Tchernij ◽  
...  
Nanophotonics ◽  
2020 ◽  
Vol 9 (16) ◽  
pp. 4853-4868
Author(s):  
Wei Qin ◽  
Ye-Hong Chen ◽  
Xin Wang ◽  
Adam Miranowicz ◽  
Franco Nori

AbstractWe propose a simple method for generating spin squeezing of atomic ensembles in a Floquet cavity subject to a weak, detuned two-photon driving. We demonstrate that the weak squeezing of light inside the cavity can, counterintuitively, induce strong spin squeezing. This is achieved by exploiting the anti-Stokes scattering process of a photon pair interacting with an atom. Specifically, one photon of the photon pair is scattered into the cavity resonance by absorbing partially the energy of the other photon whose remaining energy excites the atom. The scattering, combined with a Floquet sideband, provides an alternative mechanism to implement Heisenberg-limited spin squeezing. Our proposal does not need multiple classical and cavity-photon drivings applied to atoms in ensembles, and therefore its experimental feasibility is greatly improved compared to other cavity-based schemes. As an example, we demonstrate a possible implementation with a superconducting resonator coupled to a nitrogen-vacancy electronic-spin ensemble.


2020 ◽  
Author(s):  
Toby N. Carlson ◽  
George Petropoulos

Earth Observation (EO) provides a promising approach towards deriving accurate spatiotemporal estimates of key parameters characterizing land surface interactions, such as latent (LE) and sensible (H) heat fluxes as well as soil moisture content. This paper proposes a very simple method to implement, yet reliable to calculate evapotranspiration fraction (EF) and surface moisture availability (Mo) from remotely sensed imagery of Normalized Difference Vegetation Index (NDVI) and surface radiometric temperature (Tir). The method is unique in that it derives all of its information solely from these two images. As such, it does not depend on knowing ancillary surface or atmospheric parameters, nor does it require the use of a land surface model. The procedure for computing spatiotemporal estimates of these important land surface parameters is outlined herein stepwise for practical application by the user. Moreover, as the newly developedscheme is not tied to any particular sensor, it can also beimplemented with technologically advanced EO sensors launched recently or planned to be launched such as Landsat 8 and Sentinel 3. The latter offers a number of key advantages in terms of future implementation of the method and wider use for research and practical applications alike.


2020 ◽  
Vol 44 (38) ◽  
pp. 16320-16328 ◽  
Author(s):  
Yuanyuan Yang ◽  
Wenting Guo ◽  
Yunpu Zhai ◽  
Qianwei Jin ◽  
Hao Zhao ◽  
...  

Typical non-metallic semiconductor carbon nitrides (CNs) have enormous potential in the field of photocatalysis, but the easy recombination of the photo-generated charges severely limits their practical applications.


2019 ◽  
Vol 35 (3) ◽  
pp. 1373-1392 ◽  
Author(s):  
Dong Ding ◽  
Axel Gandy ◽  
Georg Hahn

Abstract We consider a statistical test whose p value can only be approximated using Monte Carlo simulations. We are interested in deciding whether the p value for an observed data set lies above or below a given threshold such as 5%. We want to ensure that the resampling risk, the probability of the (Monte Carlo) decision being different from the true decision, is uniformly bounded. This article introduces a simple open-ended method with this property, the confidence sequence method (CSM). We compare our approach to another algorithm, SIMCTEST, which also guarantees an (asymptotic) uniform bound on the resampling risk, as well as to other Monte Carlo procedures without a uniform bound. CSM is free of tuning parameters and conservative. It has the same theoretical guarantee as SIMCTEST and, in many settings, similar stopping boundaries. As it is much simpler than other methods, CSM is a useful method for practical applications.


2020 ◽  
Vol 12 (11) ◽  
pp. 13421-13427 ◽  
Author(s):  
Daniel J. McCloskey ◽  
Nikolai Dontschuk ◽  
David A. Broadway ◽  
Athavan Nadarajah ◽  
Alastair Stacey ◽  
...  

Nanomaterials ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 218 ◽  
Author(s):  
Huamin Chen ◽  
Longfeng Lv ◽  
Jiushuang Zhang ◽  
Shaochun Zhang ◽  
Pengjun Xu ◽  
...  

Stretchable and wearable opto-electronics have attracted worldwide attention due to their broad prospects in health monitoring and epidermal applications. Resistive strain sensors, as one of the most typical and important device, have been the subject of great improvements in sensitivity and stretchability. Nevertheless, it is hard to take both sensitivity and stretchability into consideration for practical applications. Herein, we demonstrated a simple strategy to construct a highly sensitive and stretchable graphene-based strain sensor. According to the strain distribution in the simulation result, highly sensitive planar graphene and highly stretchable crumpled graphene (CG) were rationally connected to effectively modulate the sensitivity and stretchability of the device. For the stretching mode, the device showed a gauge factor (GF) of 20.1 with 105% tensile strain. The sensitivity of the device was relatively high in this large working range, and the device could endure a maximum tensile strain of 135% with a GF of 337.8. In addition, in the bending mode, the device could work in outward and inward modes. This work introduced a novel and simple method with which to effectively monitor sensitivity and stretchability at the same time. More importantly, the method could be applied to other material categories to further improve the performance.


Mechanik ◽  
2016 ◽  
pp. 526-527
Author(s):  
Daniel S. Rudnicki ◽  
Mariusz Mrózek ◽  
Wojciech Gawlik ◽  
Krzysztof Wojciechowski

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Yulei Chen ◽  
Zhonghao Li ◽  
Hao Guo ◽  
Dajin Wu ◽  
Jun Tang

AbstractQuantum sensing based on nitrogen-vacancy centers in diamond has shown excellent properties. Combined with the imaging technique, it shows exciting practicability. Here, we demonstrate the simultaneously imaging technique of magnetic field and temperature using a wide-field quantum diamond microscope. We describe the operating principles of the diamond microscope and report its sensitivity (magnetic field ${\sim}1.8~\mu \mbox{T/Hz}^{1/2}$ ∼ 1.8 μ T/Hz 1 / 2 and temperature ${\sim}0.4~\mbox{K/Hz}^{1/2}$ ∼ 0.4 K/Hz 1 / 2 ), spatial resolution (1.3 μm), and field of view ($400 \times 300~\mu \mbox{m}^{2}$ 400 × 300 μ m 2 ). Finally, we use the microscope to obtain images of an integrated cell heater and a PCB, demonstrating its ability in the application of magnetic field and temperature simultaneously imaging at wide-field.


2020 ◽  
Vol 15 (1) ◽  
Author(s):  
Yi Su ◽  
Chunsheng Ma ◽  
Jing Chen ◽  
Huiping Wu ◽  
Weixiang Luo ◽  
...  

Abstract In recent years, the development and research of flexible sensors have gradually deepened, and the performance of wearable, flexible devices for monitoring body temperature has also improved. For the human body, body temperature changes reflect much information about human health, and abnormal body temperature changes usually indicate poor health. Although body temperature is independent of the environment, the body surface temperature is easily affected by the surrounding environment, bringing challenges to body temperature monitoring equipment. To achieve real-time and sensitive detection of various parts temperature of the human body, researchers have developed many different types of high-sensitivity flexible temperature sensors, perfecting the function of electronic skin, and also proposed many practical applications. This article reviews the current research status of highly sensitive patterned flexible temperature sensors used to monitor body temperature changes. First, commonly used substrates and active materials for flexible temperature sensors have been summarized. Second, patterned fabricating methods and processes of flexible temperature sensors are introduced. Then, flexible temperature sensing performance are comprehensively discussed, including temperature measurement range, sensitivity, response time, temperature resolution. Finally, the application of flexible temperature sensors based on highly delicate patterning are demonstrated, and the future challenges of flexible temperature sensors have prospected.


2019 ◽  
Vol 5 (8) ◽  
pp. eaax0648 ◽  
Author(s):  
Yongyuan Ren ◽  
Jiangna Guo ◽  
Ziyang Liu ◽  
Zhe Sun ◽  
Yiqing Wu ◽  
...  

Gels that are freeze-resistant and heat-resistant and have high ultimate tensile strength are desirable in practical applications owing to their potential in designing flexible energy storage devices, actuators, and sensors. Here, a simple method for fabricating ionic liquid (IL)–based click-ionogels using thiol-ene click chemistry under mild condition is reported. These click-ionogels continue to exhibit excellent mechanical properties and resilience after 10,000 fatigue cycles. Moreover, due to several unique properties of ILs, these click-ionogels exhibit high ionic conductivity, transparency, and nonflammability performance over a wide temperature range (−75° to 340°C). Click-ionogel–based triboelectric nanogenerators exhibit excellent mechanical, freeze-thaw, and heat stability. These promising features of click-ionogels will promote innovative applications in flexible and safe device design.


Sign in / Sign up

Export Citation Format

Share Document