scholarly journals Wavelength-dispersive dark-field contrast: micrometre structure resolution in neutron imaging with gratings

2016 ◽  
Vol 49 (2) ◽  
pp. 569-573 ◽  
Author(s):  
M. Strobl ◽  
B. Betz ◽  
R. P. Harti ◽  
A. Hilger ◽  
N. Kardjilov ◽  
...  

Dark-field imaging using grating interferometers has been proven to have a high potential for applications in engineering, magnetism, and soft matter and biophysics, as well as in medicine with both neutrons and X-rays. The access to spatially resolved small-angle scattering information in neutron dark-field imaging provides information about structures beyond direct spatial image resolution. The dark-field contrast modality is hence a valuable tool for materials science based on neutron imaging. This is underlined by the success of the method, despite its current limitation to qualitative scattering information. Here it is demonstrated how a wavelength-dispersive approach allows such drawbacks to be overcome by providing quantitative structure size information and hence can introduce novel possibilities and insights for materials science.

2019 ◽  
Author(s):  
Daniel Hussey ◽  
Adam J Brooks ◽  
Jacob LaManna ◽  
David Jacobson ◽  
Leslie Butler

A novel imaging mode, neutron dark field imaging, extends the capability of neutron imaging to enable one to measure the microstructure, that is length scales from the nm to µm. The dark field is a measure of the pair correlation function, which is linked to conventional small angle. Neutron dark field images of lithium-ion batteries provide spatially resolved measurements (with resolution ~100 µm) of the particle distribution along the path of the neutron beam. We applied neutron dark-field imaging to commercial lithium-ion batteries with different capacities, states of charge, and wear. The images probed length scales from 100 nm to 3 µm. We observed a uniform dark field signal across the fresh battery in both charge states which is contrasted with the worn batteries, which show clear inhomogeneities in the dark field signal, which indicates that the underlying electrode structures have changed in a non-uniform fashion.


2016 ◽  
Vol 49 (5) ◽  
pp. 1488-1500 ◽  
Author(s):  
Tommy Reimann ◽  
Sebastian Mühlbauer ◽  
Michael Horisberger ◽  
Benedikt Betz ◽  
Peter Böni ◽  
...  

Neutron grating interferometry is an advanced method in neutron imaging that allows the simultaneous recording of the transmission, the differential phase and the dark-field image. The latter in particular has recently been the subject of much interest because of its unique contrast mechanism which marks ultra-small-angle neutron scattering within the sample. Hence, in neutron grating interferometry, an imaging contrast is generated by scattering of neutrons off micrometre-sized inhomogeneities. Although the scatterer cannot be resolved, it leads to a measurable local decoherence of the beam. Here, a report is given on the design considerations, principles and applications of a new neutron grating interferometer which has recently been implemented at the ANTARES beamline at the Heinz Maier-Leibnitz Zentrum. Its highly flexible design allows users to perform experiments such as directional and quantitative dark-field imaging which provide spatially resolved information on the anisotropy and shape of the microstructure of the sample. A comprehensive overview of the neutron grating interferometer principle is given, followed by theoretical considerations to optimize the setup performance for different applications. Furthermore, an extensive characterization of the setup is presented and its abilities are demonstrated using selected case studies: (i) dark-field imaging for material differentiation, (ii) directional dark-field imaging to mark and quantify micrometre anisotropies within the sample, and (iii) quantitative dark-field imaging, providing additional size information on the sample's microstructure by probing its autocorrelation function.


2018 ◽  
Vol 4 (10) ◽  
pp. 113
Author(s):  
Simon Zabler

Very early, in 1896, Wilhelm Conrad Röntgen, the founding father of X-rays, attempted to measure diffraction and refraction by this new kind of radiation, in vain. Only 70 years later, these effects were measured by Ulrich Bonse and Michael Hart who used them to make full-field images of biological specimen, coining the term phase-contrast imaging. Yet, another 30 years passed until the Talbot effect was rediscovered for X-radiation, giving rise to a micrograting based interferometer, replacing the Bonse–Hart interferometer, which relied on a set of four Laue-crystals for beam splitting and interference. By merging the Lau-interferometer with this Talbot-interferometer, another ten years later, measuring X-ray refraction and X-ray scattering full-field and in cm-sized objects (as Röntgen had attempted 110 years earlier) became feasible in every X-ray laboratory around the world. Today, now that another twelve years have passed and we are approaching the 125th jubilee of Röntgen’s discovery, neither Laue-crystals nor microgratings are a necessity for sensing refraction and scattering by X-rays. Cardboard, steel wool, and sandpaper are sufficient for extracting these contrasts from transmission images, using the latest image reconstruction algorithms. This advancement and the ever rising number of applications for phase-contrast and dark-field imaging prove to what degree our understanding of imaging physics as well as signal processing have advanced since the advent of X-ray physics, in particular during the past two decades. The discovery of the electron, as well as the development of electron imaging technology, has accompanied X-ray physics closely along its path, both modalities exploring the applications of new dark-field contrast mechanisms these days. Materials science, life science, archeology, non-destructive testing, and medicine are the key faculties which have already integrated these new imaging devices, using their contrast mechanisms in full. This special issue “Phase-Contrast and Dark-field Imaging” gives us a broad yet very to-the-point glimpse of research and development which are currently taking place in this very active field. We find reviews, applications reports, and methodological papers of very high quality from various groups, most of which operate X-ray scanners which comprise these new imaging modalities.


MRS Bulletin ◽  
1991 ◽  
Vol 16 (3) ◽  
pp. 27-33 ◽  
Author(s):  
J.M. Gibson

The transmission electron microscope (TEM) has had a major impact on materials science in the last five decades, despite the fact that it is necessary to prepare thin samples in order to use the technique. The primary reason for this effectiveness is the ability to access both real space and diffraction data in the same instrument, and to filter in one and observe the effect in the other. This is possible because of the wave nature of electrons and the existence of effective magnetic lenses for focusing. Abbe showed that any lens has the ability to Fourier transform its input wavefield in its focal plane, and to provide a second Fourier transform in the image plane. This is schematically shown in Figure 1. A crystalline object will diffract only in certain directions, with Bragg angles (θB) depending on the inverse of the interplanar spacing. The diffraction pattern is a series of spots in the Fourier, or focal, plane of the lens. A filter placed in the focal plane serves to limit the resolution by limiting the bandwidth of the image, but it also can serve to select certain parts of the Fourier spectrum in the image. The simplest examples of this, as used in optical microscopy, are bright-field and dark-field imaging. In the former the un-scattered beam is allowed to reach the image, in the latter it is not.


2014 ◽  
Vol 20 (5) ◽  
pp. 1528-1533 ◽  
Author(s):  
Andreas Malecki ◽  
Elena Eggl ◽  
Florian Schaff ◽  
Guillaume Potdevin ◽  
Thomas Baum ◽  
...  

AbstractThe directional dark-field signal obtained with X-ray grating interferometry yields direction-dependent information about the X-ray scattering taking place inside the examined sample. It allows examination of its morphology without the requirement of resolving the micrometer size structures directly causing the scattering. The local morphology in turn gives rise to macroscopic mechanical properties of the investigated specimen. In this study, we investigate the relation between the biomechanical elasticity (Young’s modulus) and the measured directional dark-field parameters of a well-defined sample made of wood. In our proof-of-principle experiment, we found a correlation between Young’s modulus, the average dark-field signal, and the average dark-field anisotropy. Hence, we are able to show that directional dark-field imaging is a new method to predict mechanical sample properties. As grating interferometry provides absorption, phase-contrast, and dark-field data at the same time, this technique appears promising to combine imaging and mechanical testing in a single testing stage. Therefore, we believe that directional dark-field imaging will have a large impact in the materials science world.


Author(s):  
M. Awaji

It is necessary to improve the resolution, brightness and signal-to-noise ratio(s/n) for the detection and identification of point defects in crystals. In order to observe point defects, multi-beam dark-field imaging is one of the useful methods. Though this method can improve resolution and brightness compared with dark-field imaging by diffuse scattering, the problem of s/n still exists. In order to improve the exposure time due to the low intensity of the dark-field image and the low resolution, we discuss in this paper the bright-field high-resolution image and the corresponding subtracted image with reference to a changing noise level, and examine the possibility for in-situ observation, identification and detection of the movement of a point defect produced in the early stage of damage process by high energy electron bombardment.The high-resolution image contrast of a silicon single crystal in the [10] orientation containing a triple divacancy cluster is calculated using the Cowley-Moodie dynamical theory and for a changing gaussian noise level. This divacancy model was deduced from experimental results obtained by electron spin resonance. The calculation condition was for the lMeV Berkeley ARM operated at 800KeV.


2021 ◽  
Vol 135 ◽  
pp. 104145
Author(s):  
Yani P. Latul ◽  
Arnoud W. Kastelein ◽  
Patricia W.T. Beemster ◽  
Nienke E. van Trommel ◽  
Can Ince ◽  
...  

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Andreas P. Sauter ◽  
Jana Andrejewski ◽  
Manuela Frank ◽  
Konstantin Willer ◽  
Julia Herzen ◽  
...  

AbstractGrating-based X-ray dark-field imaging is a novel imaging modality with enormous technical progress during the last years. It enables the detection of microstructure impairment as in the healthy lung a strong dark-field signal is present due to the high number of air-tissue interfaces. Using the experience from setups for animal imaging, first studies with a human cadaver could be performed recently. Subsequently, the first dark-field scanner for in-vivo chest imaging of humans was developed. In the current study, the optimal tube voltage for dark-field radiography of the thorax in this setup was examined using an anthropomorphic chest phantom. Tube voltages of 50–125 kVp were used while maintaining a constant dose-area-product. The resulting dark-field and attenuation radiographs were evaluated in a reader study as well as objectively in terms of contrast-to-noise ratio and signal strength. We found that the optimum tube voltage for dark-field imaging is 70 kVp as here the most favorable combination of image quality, signal strength, and sharpness is present. At this voltage, a high image quality was perceived in the reader study also for attenuation radiographs, which should be sufficient for routine imaging. The results of this study are fundamental for upcoming patient studies with living humans.


Sign in / Sign up

Export Citation Format

Share Document