scholarly journals Mag2Pol: a program for the analysis of spherical neutron polarimetry, flipping ratio and integrated intensity data

2019 ◽  
Vol 52 (1) ◽  
pp. 175-185 ◽  
Author(s):  
Navid Qureshi

Mag2Pol is a graphical user interface program which is devoted to the treatment of data from polarized neutron diffractometers with spherical polarization analysis. Nuclear and magnetic structure models can be introduced using space-group symbols and individual symmetry operators, respectively, and viewed in an OpenGL widget. The program calculates nuclear/magnetic structure factors, flipping ratios and polarization matrices for magnetic Bragg reflections, taking into account structural twins and magnetic domains. Spherical neutron polarimetry data can be analyzed by refining a magnetic structure model including magnetic domain populations in a least-squares fit and can also be correlated with an integrated intensity data set in a joint refinement. Further features are the simultaneous refinement of nuclear and magnetic structures with integrated intensity data and the analysis of flipping ratios either with tabulated magnetic form factors or using a multipole expansion of the magnetization density.

2015 ◽  
Vol 8 (2) ◽  
pp. 941-963 ◽  
Author(s):  
T. Vlemmix ◽  
F. Hendrick ◽  
G. Pinardi ◽  
I. De Smedt ◽  
C. Fayt ◽  
...  

Abstract. A 4-year data set of MAX-DOAS observations in the Beijing area (2008–2012) is analysed with a focus on NO2, HCHO and aerosols. Two very different retrieval methods are applied. Method A describes the tropospheric profile with 13 layers and makes use of the optimal estimation method. Method B uses 2–4 parameters to describe the tropospheric profile and an inversion based on a least-squares fit. For each constituent (NO2, HCHO and aerosols) the retrieval outcomes are compared in terms of tropospheric column densities, surface concentrations and "characteristic profile heights" (i.e. the height below which 75% of the vertically integrated tropospheric column density resides). We find best agreement between the two methods for tropospheric NO2 column densities, with a standard deviation of relative differences below 10%, a correlation of 0.99 and a linear regression with a slope of 1.03. For tropospheric HCHO column densities we find a similar slope, but also a systematic bias of almost 10% which is likely related to differences in profile height. Aerosol optical depths (AODs) retrieved with method B are 20% high compared to method A. They are more in agreement with AERONET measurements, which are on average only 5% lower, however with considerable relative differences (standard deviation ~ 25%). With respect to near-surface volume mixing ratios and aerosol extinction we find considerably larger relative differences: 10 ± 30, −23 ± 28 and −8 ± 33% for aerosols, HCHO and NO2 respectively. The frequency distributions of these near-surface concentrations show however a quite good agreement, and this indicates that near-surface concentrations derived from MAX-DOAS are certainly useful in a climatological sense. A major difference between the two methods is the dynamic range of retrieved characteristic profile heights which is larger for method B than for method A. This effect is most pronounced for HCHO, where retrieved profile shapes with method A are very close to the a priori, and moderate for NO2 and aerosol extinction which on average show quite good agreement for characteristic profile heights below 1.5 km. One of the main advantages of method A is the stability, even under suboptimal conditions (e.g. in the presence of clouds). Method B is generally more unstable and this explains probably a substantial part of the quite large relative differences between the two methods. However, despite a relatively low precision for individual profile retrievals it appears as if seasonally averaged profile heights retrieved with method B are less biased towards a priori assumptions than those retrieved with method A. This gives confidence in the result obtained with method B, namely that aerosol extinction profiles tend on average to be higher than NO2 profiles in spring and summer, whereas they seem on average to be of the same height in winter, a result which is especially relevant in relation to the validation of satellite retrievals.


Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 752 ◽  
Author(s):  
Thomas Saerbeck ◽  
Henning Huckfeldt ◽  
Boris P. Toperverg ◽  
Arno Ehresmann

We present a detailed analysis of the in-plane magnetic vector configuration in head-to-head/tail-to-tail stripe domain patterns of nominal 5 μm width. The patterns have been created by He-ion bombardment induced magnetic patterning of a CoFe/IrMn3 exchange bias thin-film system. Quantitative information about the chemical and magnetic structure is obtained from polarized neutron reflectometry (PNR) and off-specular scattering (OSS). The technique provides information on the magnetic vector orientation and magnitude along the lateral coordinate of the sample, as well as the chemical and magnetic layer structure as a function of depth. Additional sensitivity to magnetic features is obtained through a neutron wave field resonance, which is fully accounted for in the presented analysis. The scattering reveals a domain width imbalance of 5.3 to 3.7 μm of virgin and bombarded stripes, respectively. Further, we report that the magnetization in the bombarded stripe significantly deviates from the head-to-head arrangement. A domain wall of 0.6 μm with homogeneous magnetization direction is found to separate the two neighboring domains. The results contain detailed information on length scales and magnetization vectors provided by PNR and OSS in absolute units. We illustrate the complementarity of the technique to microscopy techniques for obtaining a quantitative description of imprinted magnetic domain patterns and illustrate its applicability to different sample systems.


2018 ◽  
Vol 172 ◽  
pp. 03002
Author(s):  
Haiming HU

The measurements of hadronic form factors of three modes using the data samples collected with the BESIII detector at BEPCII collider are presented. The cross section of e+e- → p p̅ at 12 energies from 2232.4 to 3671.0 MeV are measured, the electromagnetic form factor is deduced, and the ratio |GE/GM| is extracted by fitting the polar angle distribution. The preliminary results about the form factors of e+e- → ∧c+ ⊼c- will also be described. The cross section of e+e- → π+ π-between effective center-of-mass energy 600 and 900 MeV is measured by the ISR return method using the data set with the integrated luminosity of 2.93 fb-1 taken at ψ(3773) peak, the pion form factor is extracted.


2001 ◽  
Vol 64 (13) ◽  
Author(s):  
A. Hiess ◽  
P. J. Brown ◽  
E. Lelièvre-Berna ◽  
B. Roessli ◽  
N. Bernhoeft ◽  
...  

Author(s):  
E. Weckert ◽  
R. Müller ◽  
J. Zellner ◽  
I. Zegers ◽  
R. Loris

AbstractInvariant triplet phases can be determined experimentally by multi-beam interference experiments. In favourable conditions phases can also be determined from crystals of small macromolecules. The phase error is quite small, provided crystals of good quality are available. Single phases can be derived from triplet phases by means of maximum entropy based statistical methods. The number of experimental triplet phases necessary to solve a small protein crystal structure can be reduced by the application of an automatic refinement procedure. About 2.5 reflection phases per residue are necessary to solve the structure of a small protein if a high-resolution intensity data set is available.


2020 ◽  
Vol 9 (2) ◽  
pp. 471-481
Author(s):  
Simon Toepfer ◽  
Yasuhito Narita ◽  
Daniel Heyner ◽  
Patrick Kolhey ◽  
Uwe Motschmann

Abstract. Minimum variance distortionless projection, the so-called Capon method, serves as a powerful and robust data analysis tool when working on various kinds of ill-posed inverse problems. The method has not only successfully been applied to multipoint wave and turbulence studies in the context of space plasma physics, but it is also currently being considered as a technique to perform the multipole expansion of planetary magnetic fields from a limited data set, such as Mercury's magnetic field analysis. The practical application and limits of the Capon method are discussed in a rigorous fashion by formulating its linear algebraic derivation in view of planetary magnetic field studies. Furthermore, the optimization of Capon's method by making use of diagonal loading is considered.


2014 ◽  
Vol 4 (4) ◽  
pp. 38-44
Author(s):  
Zuyen Phu Luong ◽  
Huu Ha Nguyen

The article presents the multipole expansion for the electron-nucleus scattering cross-section at high energies within framework of the unified electroweak theory. The electroweak currents of  the nucleus is expanded into simple components with definite angular momentum, which are called the multipole form factors. The multipole expansion of the cross-section is a consequence of the above expansion. Besides the familiar electromagnetic form factors FxL , there are new form factors VLX and ALX related to weak interactions, corresponding to the vector and axial weak currents. The obtained general expressions are applied to the nucleus 36Li , where the partial form factors are computed in the multiparticle shell model.


2014 ◽  
Vol 5 (2) ◽  
pp. 58 ◽  
Author(s):  
Tarek Al Baghal

Many survey questions ask respondents to provide responses that contain quantitative information, often using either numeric open-ended responses or vague quantifier scales. Generally, survey researchers have argued against the use of vague quantifier scales. However, no study has compared accuracy between vague quantifiers and numeric open-ended responses. This study is the first to do so, using a unique data set created through an experiment. 124 participants studied word lists of paired words, where the experiment employed a 2 (context) x 2 (response form) x 6 (actual frequency) factorial design, with the context and form factors manipulated between subjects, and the frequency factor manipulated within subjects. The two conditions for the context factor are same-context and different-context conditions where the context word either was the same or different for each presentation of the target word. The other between subject factor was response form, where participants responded to a recall test using either vague quantifiers or numeric open-ended responses. Translations of vague quantifiers were obtained and used in accuracy tests. Finally, a numeracy test was administered to collect information about respondent numeracy. Different accuracy measures are estimated and analyzed. Results show context memory did not have a significant effect. Numeracy has an effect, but the direction depends on form and context. Actual frequency had a significant effect on accuracy, but did not interact with other variables. Importantly, results suggest vague quantifiers tend to improve accuracy more often relative to numeric open-ended response. DOI:10.2458/azu_jmmss_v5i2_Al_baghal


Sign in / Sign up

Export Citation Format

Share Document