Low-cost multi-objective optimization and experimental validation of UWB MIMO antenna

2016 ◽  
Vol 33 (4) ◽  
pp. 1246-1258 ◽  
Author(s):  
Slawomir Koziel ◽  
Adrian Bekasiewicz
Keyword(s):  
Design Optimization ◽  
Computational Cost ◽  
Electrical Performance ◽  
Multi Objective Optimization ◽  
Content Type ◽  
Mimo Antenna ◽  
Computational Costs ◽  
Multi Objective ◽  
Trade Offs ◽  
Response Correction

Purpose – The purpose of this paper is to validate methodologies for expedited multi-objective design optimization of complex antenna structures both numerically and experimentally. Design/methodology/approach – The task of identifying the best possible trade-offs between the antenna size and its electrical performance is formulated as multi-objective optimization problem. Algorithmic frameworks are described for finding Pareto-optimal designs using auxiliary surrogate models and two alternative approaches to design refinement: response correction techniques and co-kriging. Numerical and experimental case studies are provided to demonstrate feasibility of solving real-world and complex antenna design tasks. Findings – It is possible, through appropriate combination of the surrogate modeling techniques (both data driven and physics based) and response correction methods, to find the set of alternative designs representing the best possible trade-offs between conflicting design objectives, here, electrical performance and size. Design optimization can be performed at practically feasible computational costs. Research limitations/implications – The study demonstrates feasibility of automated multi-objective design optimization of antennas at low computational cost. The presented techniques reach beyond the commonly used design approaches based on parameter sweeps and similar hands-on methods, particularly in terms of automation, reliability and reduction of the computational costs of the design processes. Originality/value – Multi-objective design of antenna structures is very challenging when high-fidelity electromagnetic simulations are utilized for performance evaluation of the structure at hand. The proposed design framework permits rapid optimization of complex structures (here, MIMO antenna), which is hardly possible using conventional methods.

Patch size setup and performance/cost trade-offs in multi-objective EM-driven antenna optimization using sequential domain patching

2017 ◽  
Vol 34 (4) ◽  
pp. 1070-1081
Author(s):  
Slawomir Koziel ◽  
Adrian Bekasiewicz
Keyword(s):  
Control Parameter ◽  
Computational Cost ◽  
Design Procedure ◽  
Simulation Models ◽  
Multi Objective Optimization ◽  
Computationally Efficient ◽  
Content Type ◽  
Multi Objective ◽  
Trade Offs ◽  
And Performance

Purpose This paper aims to assess control parameter setup and its effect on computational cost and performance of deterministic procedures for multi-objective design optimization of expensive simulation models of antenna structures. Design/methodology/approach A deterministic algorithm for cost-efficient multi-objective optimization of antenna structures has been assessed. The algorithm constructs a patch connecting extreme Pareto-optimal designs (obtained by means of separate single-objective optimization runs). Its performance (both cost- and quality-wise) depends on the dimensions of the so-called patch, an elementary region being relocated in the course of the optimization process. The cost/performance trade-offs are studied using two examples of ultra-wideband antenna structures and the optimization results are compared to draw conclusions concerning the algorithm robustness and determine the most advantageous control parameter setups. Findings The obtained results indicate that the investigated algorithm is very robust, i.e. its performance is weakly dependent on the control parameters setup. At the same time, it is found that the most suitable setups are those that ensure low computational cost, specifically non-uniform ones generated on the basis of sensitivity analysis. Research limitations/implications The study provides recommendations for control parameter setup of deterministic multi-objective optimization procedure for computationally efficient design of antenna structures. This is the first study of this kind for this particular design procedure, which confirms its robustness and determines the most suitable arrangement of the control parameters. Consequently, the presented results permit full automation of the surrogate-assisted multi-objective antenna optimization process while ensuring its lowest possible computational cost. Originality/value The work is the first comprehensive validation of the sequential domain patching algorithm under various scenarios of its control parameter setup. The considered design procedure along with the recommended parameter arrangement is a robust and computationally efficient tool for fully automated multi-objective optimization of expensive simulation models of contemporary antenna structures.

MONet

2017 ◽  
Vol 13 (4) ◽  
pp. 345-369
Author(s):  
Kamel Barka ◽  
Azeddine Bilami ◽  
Samir Gourdache
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Power Efficiency ◽  
Sensor Nodes ◽  
Sensor Data ◽  
Wireless Sensor ◽  
Multi Objective Optimization ◽  
Content Type ◽  
Multi Objective ◽  
Trade Offs

Purpose The purpose of this paper is to ensure power efficiency in wireless sensor networks (WSNs) through a new framework-oriented middleware, based on a biologically inspired mechanism that uses an evolutionary multi-objective optimization algorithm. The authors call this middleware framework multi-objective optimization for wireless sensor networks (MONet). Design/methodology/approach In MONet, the middleware level of each network node autonomously adjusts its routing parameters according to dynamic network conditions and seeks optimal trade-offs among performance objectives for a balance of its global performance. MONet controls the cooperation between agents (network nodes) while varying transmission paths to reduce and distribute power consumption equitably on all the sensor nodes of network. MONet-runtime uses a modified TinyDDS middleware platform. Findings Simulation results confirm that MONet allows power efficiency to WSN nodes while adapting their sleep periods and self-heal false-positive sensor data. Originality/value The framework implementation is lightweight and efficient enough to run on resource-limited nodes such as sensor nodes.

Fast multi-objective design optimization of microwave and antenna structures using data-driven surrogates and domain segmentation

2019 ◽  
Vol 37 (2) ◽  
pp. 753-788
Author(s):  
Slawomir Koziel ◽  
Adrian Bekasiewicz
Keyword(s):  
Design Optimization ◽  
Design Problem ◽  
Low Cost ◽  
Computational Cost ◽  
Search Space ◽  
Population Based ◽  
Design Framework ◽  
Content Type ◽  
Multi Objective ◽  
Variable Fidelity

Purpose The purpose of this paper is to investigate the strategies and algorithms for expedited design optimization of microwave and antenna structures in multi-objective setup. Design/methodology/approach Formulation of the multi-objective design problem-oriented toward execution of the population-based metaheuristic algorithm within the segmented search space is investigated. Described algorithmic framework exploits variable fidelity modeling, physics- and approximation-based representation of the structure and model correction techniques. The considered approach is suitable for handling various problems pertinent to the design of microwave and antenna structures. Numerical case studies are provided demonstrating the feasibility of the segmentation-based framework for the design of real-world structures in setups with two and three objectives. Findings Formulation of appropriate design problem enables identification of the search space region containing Pareto front, which can be further divided into a set of compartments characterized by small combined volume. Approximation model of each segment can be constructed using a small number of training samples and then optimized, at a negligible computational cost, using population-based metaheuristics. Introduction of segmentation mechanism to multi-objective design framework is important to facilitate low-cost optimization of many-parameter structures represented by numerically expensive computational models. Further reduction of the design cost can be achieved by enforcing equal-volumes of the search space segments. Research limitations/implications The study summarizes recent advances in low-cost multi-objective design of microwave and antenna structures. The investigated techniques exceed capabilities of conventional design approaches involving direct evaluation of physics-based models for determination of trade-offs between the design objectives, particularly in terms of reliability and reduction of the computational cost. Studies on the scalability of segmentation mechanism indicate that computational benefits of the approach decrease with the number of search space segments. Originality/value The proposed design framework proved useful for the rapid multi-objective design of microwave and antenna structures characterized by complex and multi-parameter topologies, which is extremely challenging when using conventional methods driven by population-based metaheuristics algorithms. To the authors knowledge, this is the first work that summarizes segmentation-based approaches to multi-objective optimization of microwave and antenna components.

On deterministic procedures for low-cost multi-objective design optimization of miniaturized impedance matching transformers

2017 ◽  
Vol 34 (2) ◽  
pp. 403-419 ◽  
Author(s):  
Slawomir Koziel ◽  
Adrian Bekasiewicz
Keyword(s):  
Design Optimization ◽  
Pareto Front ◽  
Low Cost ◽  
Impedance Matching ◽  
Simulation Models ◽  
Multi Objective Optimization ◽  
Content Type ◽  
Multi Objective ◽  
Modeling Techniques ◽  
Em Simulation

Purpose This paper aims to investigate deterministic strategies for low-cost multi-objective design optimization of compact microwave structures, specifically, impedance matching transformers. The considered methods involve surrogate modeling techniques and variable-fidelity electromagnetic (EM) simulations. In contrary to majority of conventional approaches, they do not rely on population-based metaheuristics, which permit lowering the design cost and improve reliability. Design/methodology/approach There are two algorithmic frameworks presented, both fully deterministic. The first algorithm involves creating a path covering the Pareto front and arranged as a sequence of patches relocated in the course of optimization. Response correction techniques are used to find the Pareto front representation at the high-fidelity EM simulation level. The second algorithm exploits Pareto front exploration where subsequent Pareto-optimal designs are obtained by moving along the front by means of solving appropriately defined local constrained optimization problems. Numerical case studies are provided demonstrating feasibility of solving real-world problems involving expensive EM-simulation models of impedance transformer structures. Findings It is possible, by means of combining surrogate modeling techniques and constrained local optimization, to identify the set of alternative designs representing Pareto-optimal solutions, in a realistic time frame corresponding to a few dozen of high-fidelity EM simulations of the respective structures. Multi-objective optimization for the considered class of structures can be realized using deterministic approaches without defaulting to evolutionary methods. Research limitations/implications The present study can be considered a step toward further studies on expedited optimization of computationally expensive simulation models for miniaturized microwave components. Originality/value The proposed algorithmic solutions proved useful for expedited multi-objective design optimization of miniaturized microwave structures. The problem is extremely challenging when using conventional methods, in particular evolutionary algorithms. To the authors’ knowledge, this is one of the first attempts to investigate deterministic surrogate-assisted multi-objective optimization of compact components at the EM-simulation level.

Strategies for computationally feasible multi-objective simulation-driven design of compact RF/microwave components

2016 ◽  
Vol 33 (1) ◽  
pp. 184-201 ◽  
Author(s):  
Slawomir Koziel ◽  
Adrian Bekasiewicz
Keyword(s):  
Surrogate Modeling ◽  
Simulation Models ◽  
Time Frame ◽  
Multi Objective Optimization ◽  
Content Type ◽  
Multi Objective ◽  
Trade Offs ◽  
Microwave Components ◽  
Modeling Techniques ◽  
Em Simulation

Purpose – Strategies for accelerated multi-objective optimization of compact microwave and RF structures are investigated, including the possibility of exploiting surrogate modeling techniques for electromagnetic (EM)-driven design speedup for such components. The paper aims to discuss these issues. Design/methodology/approach – Two algorithmic frameworks are described that are based on fast response surface approximation models, structure decomposition, and Pareto front refinement. Numerical case studies are provided demonstrating feasibility of solving real-world problems involving multi-objective optimization of miniaturized microwave passives and expensive EM-simulation models of such structures. Findings – It is possible, through appropriate combination of the surrogate modeling techniques and response correction methods, to identify the set of alternative designs representing the best possible trade-offs between conflicting design objectives in a realistic time frame corresponding to a few dozen of high-fidelity EM simulations of the respective structures. Research limitations/implications – The present study sets a direction for further studied on expedited optimization of computationally expensive simulation models for miniaturized microwave components. Originality/value – The proposed algorithmic framework proved useful for fast design of microwave structures, which is extremely challenging when using conventional methods. To the authors’ knowledge, this is one of the first attempts to surrogate-assisted multi-objective optimization of compact components at the EM-simulation level.

Applications of surrogate-assisted and multi-fidelity multi-objective optimization algorithms to simulation-based aerodynamic design

2019 ◽  
Vol 37 (2) ◽  
pp. 430-457 ◽  
Author(s):  
Anand Amrit ◽  
Leifur Leifsson
Keyword(s):  
Pareto Set ◽  
Test Cases ◽  
Aerodynamic Design ◽  
Multi Objective Optimization ◽  
Design Exploration ◽  
Content Type ◽  
Multi Objective ◽  
Trade Offs ◽  
Simulation Based ◽  
Set Identification

Purpose The purpose of this work is to apply and compare surrogate-assisted and multi-fidelity, multi-objective optimization (MOO) algorithms to simulation-based aerodynamic design exploration. Design/methodology/approach The three algorithms for multi-objective aerodynamic optimization compared in this work are the combination of evolutionary algorithms, design space reduction and surrogate models, the multi-fidelity point-by-point Pareto set identification and the multi-fidelity sequential domain patching (SDP) Pareto set identification. The algorithms are applied to three cases, namely, an analytical test case, the design of transonic airfoil shapes and the design of subsonic wing shapes, and are evaluated based on the resulting best possible trade-offs and the computational overhead. Findings The results show that all three algorithms yield comparable best possible trade-offs for all the test cases. For the aerodynamic test cases, the multi-fidelity Pareto set identification algorithms outperform the surrogate-assisted evolutionary algorithm by up to 50 per cent in terms of cost. Furthermore, the point-by-point algorithm is around 27 per cent more efficient than the SDP algorithm. Originality/value The novelty of this work includes the first applications of the SDP algorithm to multi-fidelity aerodynamic design exploration, the first comparison of these multi-fidelity MOO algorithms and new results of a complex simulation-based multi-objective aerodynamic design of subsonic wing shapes involving two conflicting criteria, several nonlinear constraints and over ten design variables.

Simulation-driven design of compact ultra-wideband antenna structures

2016 ◽  
Vol 33 (4) ◽  
pp. 1051-1069 ◽  
Author(s):  
Slawomir Koziel ◽  
Adrian Bekasiewicz
Keyword(s):  
Design Optimization ◽  
Design Problem ◽  
Size Reduction ◽  
Ultra Wideband ◽  
Antenna Design ◽  
Electrical Performance ◽  
Content Type ◽  
Antenna Size ◽  
Computational Costs ◽  
Uwb Antennas

Purpose – The purpose of this paper is to investigate strategies and algorithms for expedited design optimization and explicit size reduction of compact ultra-wideband (UWB) antennas. Design/methodology/approach – Formulation of the compact antenna design problem aiming at explicit size reduction while maintaining acceptable electrical performance is presented. Algorithmic frameworks are described suitable for handling various design situations and involving simulation models without and with response gradients available. Numerical and experimental case studies are provided demonstrating feasibility of solving real-world miniaturized antenna design tasks. Findings – It is possible, through appropriate combination of the global and local optimization methods, surrogate modeling techniques and response correction methods, to find optimum dimensions of antenna structures that minimize antenna size while maintaining acceptable electrical performance. Design optimization can be performed at practically feasible computational costs. Research limitations/implications – The study summarizes recent advances in miniaturization-oriented design optimization of UWB antennas. The presented techniques reach far beyond the commonly used design approaches based on parameter sweeps and similar hands-on methods, particularly in terms of automation, reliability, and reduction of the computational costs of the design processes. Originality/value – The proposed design problem formulation and algorithmic frameworks proved useful for rapid design of compact UWB antenna structures, which is extremely challenging when using conventional methods. To the knowledge, this is the first attempt to efficient solving of this type of design problems, especially in the context of explicit antenna size reduction.

Integrated Design and Multi-Objective Optimization of a Single Stage Heat-Pump Turbocompressor

2013 ◽  
Author(s):  
J. Schiffmann
Keyword(s):  
Design Optimization ◽  
High Efficiency ◽  
Integrated Design ◽  
Heat Pumps ◽  
Small Scale ◽  
Multi Objective Optimization ◽  
Design Constraints ◽  
Multi Objective ◽  
Wide Range ◽  
Standard Design

Small scale turbomachines in domestic heat pumps reach high efficiency and provide oil-free solutions which improve heat-exchanger performance and offer major advantages in the design of advanced thermodynamic cycles. An appropriate turbocompressor for domestic air based heat pumps requires the ability to operate on a wide range of inlet pressure, pressure ratios and mass flows, confronting the designer with the necessity to compromise between range and efficiency. Further the design of small-scale direct driven turbomachines is a complex and interdisciplinary task. Textbook design procedures propose to split such systems into subcomponents and to design and optimize each element individually. This common procedure, however, tends to neglect the interactions between the different components leading to suboptimal solutions. The authors propose an approach based on the integrated philosophy for designing and optimizing gas bearing supported, direct driven turbocompressors for applications with challenging requirements with regards to operation range and efficiency. Using previously validated reduced order models for the different components an integrated model of the compressor is implemented and the optimum system found via multi-objective optimization. It is shown that compared to standard design procedure the integrated approach yields an increase of the seasonal compressor efficiency of more than 12 points. Further a design optimization based sensitivity analysis allows to investigate the influence of design constraints determined prior to optimization such as impeller surface roughness, rotor material and impeller force. A relaxation of these constrains yields additional room for improvement. Reduced impeller force improves efficiency due to a smaller thrust bearing mainly, whereas a lighter rotor material improves rotordynamic performance. A hydraulically smoother impeller surface improves the overall efficiency considerably by reducing aerodynamic losses. A combination of the relaxation of the 3 design constraints yields an additional improvement of 6 points compared to the original optimization process. The integrated design and optimization procedure implemented in the case of a complex design problem thus clearly shows its advantages compared to traditional design methods by allowing a truly exhaustive search for optimum solutions throughout the complete design space. It can be used for both design optimization and for design analysis.

scholarly journals Multi-Objective Multidisciplinary Design Optimization of a Robotic Fish System

2021 ◽  
Vol 9 (5) ◽  
pp. 478
Author(s):  
Hao Chen ◽  
Weikun Li ◽  
Weicheng Cui ◽  
Ping Yang ◽  
Linke Chen
Keyword(s):  
Design Optimization ◽  
Optimization Algorithm ◽  
Multidisciplinary Design Optimization ◽  
Robotic Fish ◽  
Multidisciplinary Design ◽  
Optimization Approach ◽  
Multi Objective Optimization ◽  
Multi Objective ◽  
Cfd Method ◽  
The Individual

Biomimetic robotic fish systems have attracted huge attention due to the advantages of flexibility and adaptability. They are typically complex systems that involve many disciplines. The design of robotic fish is a multi-objective multidisciplinary design optimization problem. However, the research on the design optimization of robotic fish is rare. In this paper, by combining an efficient multidisciplinary design optimization approach and a novel multi-objective optimization algorithm, a multi-objective multidisciplinary design optimization (MMDO) strategy named IDF-DMOEOA is proposed for the conceptual design of a three-joint robotic fish system. In the proposed IDF-DMOEOA strategy, the individual discipline feasible (IDF) approach is adopted. A novel multi-objective optimization algorithm, disruption-based multi-objective equilibrium optimization algorithm (DMOEOA), is utilized as the optimizer. The proposed MMDO strategy is first applied to the design optimization of the robotic fish system, and the robotic fish system is decomposed into four disciplines: hydrodynamics, propulsion, weight and equilibrium, and energy. The computational fluid dynamics (CFD) method is employed to predict the robotic fish’s hydrodynamics characteristics, and the backpropagation neural network is adopted as the surrogate model to reduce the CFD method’s computational expense. The optimization results indicate that the optimized robotic fish shows better performance than the initial design, proving the proposed IDF-DMOEOA strategy’s effectiveness.

scholarly journals Multi-Objective Optimization of Autonomous Microgrids with Reliability Consideration

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4466
Author(s):  
Maël Riou ◽  
Florian Dupriez-Robin ◽  
Dominique Grondin ◽  
Christophe Le Loup ◽  
Michel Benne ◽  
...  
Keyword(s):  
Power Systems ◽  
Rural Areas ◽  
Energy System ◽  
Design Stage ◽  
Multi Objective Optimization ◽  
Renewable Energy Resources ◽  
Nsga Ii ◽  
Renewable Integration ◽  
Multi Objective ◽  
Trade Offs

Microgrids operating on renewable energy resources have potential for powering rural areas located far from existing grid infrastructures. These small power systems typically host a hybrid energy system of diverse architecture and size. An effective integration of renewable energies resources requires careful design. Sizing methodologies often lack the consideration for reliability and this aspect is limited to power adequacy. There exists an inherent trade-off between renewable integration, cost, and reliability. To bridge this gap, a sizing methodology has been developed to perform multi-objective optimization, considering the three design objectives mentioned above. This method is based on the non-dominated sorting genetic algorithm (NSGA-II) that returns the set of optimal solutions under all objectives. This method aims to identify the trade-offs between renewable integration, reliability, and cost allowing to choose the adequate architecture and sizing accordingly. As a case study, we consider an autonomous microgrid, currently being installed in a rural area in Mali. The results show that increasing system reliability can be done at the least cost if carried out in the initial design stage.

Sign in / Sign up

Export Citation Format

Share Document