A rotating superellipse inside a hexagonalshaped cavity suspended by nano-encapsulated phase change materials based on the ISPH method

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Zehba Raizah ◽  
Abdelraheem M. Aly
Keyword(s):  
Phase Change ◽  
Phase Change Material ◽  
Phase Change Materials ◽  
Solid Particles ◽  
Content Type ◽  
Particle Hydrodynamics ◽  
Smoothed Particle ◽  
Diffusion Convection ◽  
Phase Change Heat Transfer ◽  
Change Material

Purpose The purpose of this paper is to perform numerical simulations based on the incompressible smoothed particle hydrodynamics (ISPH) method for thermo-diffusion convection in a hexagonal-shaped cavity saturated by a porous medium and suspended by a nano-encapsulated phase change material (NEPCM). Here, the solid particles are inserted into a phase change material to enhance its thermal performance. Design/methodology/approach Superellipse rotated shapes with variable lengths are embedded inside a hexagonal-shaped cavity. These inner shapes are rotated around their center by a uniform circular velocity and their conditions are positioned at high temperature and concentration. The controlling equations in a non-dimensional form were analyzed by using the ISPH method. At first, the validation of the ISPH results is performed. Afterward, the implications of a fusion temperature, lengths/types of the superellipse shapes, nanoparticles parameter and time parameter on the phase change heat transfer, isotherms, isoconcentration and streamlines were addressed. Findings The achieved simulations indicated that the excess in the length of an inner superellipse shape augments the temperature, concentration and maximum of the streamlines in a hexagonal-shaped cavity. The largest values of mean Nusselt number are attained at the inner rhombus shape with convex (n = 1.5) and the largest values of mean Sherwood number are attained at the inner rectangle shape with rounded corners (n = 4). Originality/value The ISPH method is developed to emulate the influences of the uniform rotation of the novel geometry shapes on heat/mass transport inside a hexagonal-shaped cavity suspended by NEPCM and saturated by porous media.

Melting heat transfer of a non-Newtonian phase change material in a cylindrical vertical-cavity partially filled porous media

2019 ◽  
Vol 30 (7) ◽  
pp. 3765-3789 ◽  
Author(s):  
Mohammad Ghalambaz ◽  
Kasra Ayoubi Ayoubloo ◽  
Ahmad Hajjar
Keyword(s):  
Heat Transfer ◽  
Phase Change ◽  
Phase Change Material ◽  
Metal Foam ◽  
Governing Equations ◽  
Melting Front ◽  
Content Type ◽  
Porous Layers ◽  
Phase Change Heat Transfer ◽  
Change Material

Purpose This paper aims to investigate melting heat transfer of a non-Newtonian phase change material (PCM) in a cylindrical enclosure-space between two tubes using a deformed mesh method. Design/methodology/approach Metal foam porous layers support the inner and outer walls of the enclosure. The porous layers and clear space of the enclosure are filled with PCM. The natural convection effects during the phase change are taken into account, and the governing equations for the molten region and solid region of the enclosure are introduced. The governing equations are transformed into non-dimensional form and then solved using finite element method. The results are compared with the literary works and found in good agreement. The non-Newtonian effects on the phase change heat transfer and melting front are studied. Findings The results show that the increase of non-Newtonian effects (the decrease of the power-law index) enhances the heat melting process in the cavity at the moderate times of phase change heat transfer. The temperature gradients in porous metal foam over the hot wall are small, and hence, the porous layer notably increases the melting rate. When the melting front reaches the cold porous layer, strong non-linear behaviors of the melting front can be observed. Originality/value The phase change heat transfer of non-Newtonian fluid in a cylindrical enclosure partially filled with metal foams is addressed for the first time.

Alternate PCM with air cavities in LED heat sink for transient thermal management

2019 ◽  
Vol 29 (11) ◽  
pp. 4377-4393 ◽  
Author(s):  
Sana Ben Salah ◽  
Mohamed Bechir Ben Hamida
Keyword(s):  
Phase Change ◽  
Phase Change Material ◽  
Heat Sink ◽  
Phase Change Materials ◽  
Melting Process ◽  
Junction Temperature ◽  
Melting Time ◽  
Content Type ◽  
Good Ability ◽  
Change Material

Purpose The purpose of this paper is to optimize the configuration of a heat sink with phase change material for improving the cooling performance of light emitting diodes (LED). Design/methodology/approach A numerical three-dimensional time-dependent model is developed with COMSOL Multiphysics to simulate the phase change material melting process during both the charging and discharging period. Findings The model is validated with previously published works. It found a good agreement. The difference between filled cavities with phase change materials (PCM) and alternate cavities air-PCM is discussed. The last-mentioned showed a good ability for reducing the junction temperature during the melting time. Three cases of this configuration having the same total volume of PCM but a different number of cavities are compared. The case of ten fins with five PCM cavities is preferred because it permit a reduction of 21 per cent of the junction temperature with an enhancement ratio of 2:4. The performance of this case under different power input is verified. Originality/value The use of alternate air-PCM cavities of the heat sink. The use of PCM in LED to delay the peak temperature in the case of thermal shock (for example, damage of fan) An amount of energy is stored in the LED and it is evacuated to the ambient of the accommodation by the cycle of charging and discharging established (1,765 Joule stored and released each 13 min with 1 LED chip of 5 W).

Numerical Thermal Performance Investigation of an Electric Motor Passive Cooling System Employing Phase Change Materials

2021 ◽  
Author(s):  
Ali Deriszadeh ◽  
Filippo de Monte ◽  
Marco Villani
Keyword(s):  
Phase Change ◽  
Phase Change Material ◽  
Electric Motor ◽  
Phase Change Materials ◽  
Cooling System ◽  
Passive Cooling ◽  
Time Step ◽  
Cooling Performance ◽  
Passive Cooling System ◽  
Change Material

Abstract This study investigates the cooling performance of a passive cooling system for electric motor cooling applications. The metal-based phase change materials are used for cooling the motor and preventing its temperature rise. As compared to oil-based phase change materials, these materials have a higher melting point and thermal conductivity. The flow field and transient heat conduction are simulated using the finite volume method. The accuracy of numerical values obtained from the simulation of the phase change materials is validated. The sensitivity of the numerical results to the number of computational elements and time step value is assessed. The main goal of adopting the phase change material based passive cooling system is to maintain the operational motor temperature in the allowed range for applications with high and repetitive peak power demands such as electric vehicles by using phase change materials in cooling channels twisted around the motor. Moreover, this study investigates the effect of the phase change material container arrangement on the cooling performance of the under study cooling system.

Three-dimensional computational study in a corrugated pipe inserted system filled with phase change material

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ömer Akbal ◽  
Hakan F. Öztop ◽  
Nidal H. Abu-Hamdeh
Keyword(s):  
Phase Change ◽  
Phase Change Material ◽  
Computational Analysis ◽  
Computational Study ◽  
Three Dimensional ◽  
Simple Algorithm ◽  
Melting Time ◽  
Geometrical Parameters ◽  
Content Type ◽  
Change Material

Purpose The purpose of this paper is to make a three-dimensional computational analysis of melting in corrugated pipe inserted system filled with phase change material (PCM). The system was heated from the inner pipe, and temperature of the outer pipe was lower than that of inner pipe. Different geometrical ratio cases and two different temperature differences were tested for their effect on melting time. Design/methodology/approach A computational analysis through a pipe with corrugated pipe filled with PCM is analyzed. Finite volume method was applied with the SIMPLE algorithm method to solve the governing equations. Findings The results indicate that the geometrical parameters can be used to control the melting time inside the heat exchanger which, in turn, affect the energy efficiency. The fastest melting time is seen in Case 4 at the same temperature difference which is the major observation of the current work. Originality/value Originality of this work is to perform a three-dimensional analysis of melting of PCM in a corrugated pipe inserted pipe.

Modelling of a Phase Change Material melting process heated from below using spectral collocation methods

2014 ◽  
Vol 24 (3) ◽  
pp. 697-734 ◽  
Author(s):  
Jean Batina ◽  
Serge Blancher ◽  
Tarik Kouskou
Keyword(s):  
Heat Flux ◽  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Textile Industry ◽  
Present Model ◽  
Good Accuracy ◽  
Content Type ◽  
Energy Equations ◽  
Change Material

Purpose – Mathematical and numerical models are developed to study the melting of a Phase Change Material (PCM) inside a 2D cavity. The bottom of the cell is heated at constant and uniform temperature or heat flux, assuming that the rest of the cavity is completely adiabatic. The paper used suitable numerical methods to follow the interface temporal evolution with a good accuracy. The purpose of this paper is to show how the evolution of the latent energy absorbed to melt the PCM depends on the temperature imposed on the lower wall of the cavity. Design/methodology/approach – The problem is written with non-homogeneous boundary conditions. Momentum and energy equations are numerically solved in space by a spectral collocation method especially oriented to this situation. A Crank-Nicolson scheme permits the resolution in time. Findings – The results clearly show the evolution of multicellular regime during the process of fusion and the kinetics of phase change depends on the boundary condition imposed on the bottom cell wall. Thus the charge and discharge processes in energy storage cells can be controlled by varying the temperature in the cell PCM. Substantial modifications of the thermal convective heat and mass transfer are highlighted during the transient regime. This model is particularly suitable to follow with a good accuracy the evolution of the solid/liquid interface in the process of storage/release energy. Research limitations/implications – The time-dependent physical properties that induce non-linear coupled unsteady terms in Navier-Stokes and energy equations are not taken into account in the present model. The present model is actually extended to these coupled situations. This problem requires smoother geometries. One can try to palliate this disadvantage by constructing smoother approximations of non-smooth geometries. The augmentation of polynomials developments orders increases strongly the computing time. When the external heat flux or temperature imposed at the PCM is much greater than the temperature of the PCM fusion, one must choose carefully some data to assume the algorithms convergence. Practical implications – Among the areas where this work can be used, are: buildings where the PCM are used in insulation and passive cooling; thermal energy storage, the PCM stores energy by changing phase, solid to liquid (fusion); cooling and transport of foodstuffs or pharmaceutical or medical sensitive products, the PCM is used in the food industry, pharmaceutical and medical, to minimize temperature variations of food, drug or sensitive materials; and the textile industry, PCM materials in the textile industry are used in microcapsules placed inside textile fibres. The PCM intervene to regulate heat transfer between the body and the outside. Originality/value – The paper's originality is reflected in the precision of its results, due to the use of a high-accuracy numerical approximation based on collocation spectral methods, and the choice of Chebyshev polynomials basis in both axial and radial directions.

scholarly journals Performance Improvement of a Household Refrigerator using Phase Change Material

2021 ◽  
Vol 16 (1) ◽  
pp. 032-041
Author(s):  
Pradeep N ◽  
Somesh Subramanian S
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Phase Change Materials ◽  
Energy Savings ◽  
Storage System ◽  
Thermal Storage ◽  
Latent Heat Storage ◽  
Peak Loads ◽  
Change Material

Thermal energy storage through phase change material has been used for wide applications in the field of air conditioning and refrigeration. The specific use of this thermal storage has been for energy storage during low demand and release of this energy during peak loads with potential to provide energy savings due to this. The principle of latent heat storage using phase change materials (PCMs) can be incorporated into a thermal storage system suitable for using deep freezers. The evaporator is covered with another box which has storage capacity or passage through phase change material. The results revealed that the performance is increased from 3.2 to 3.5 by using PCM.

Dissipative particle dynamics study of nano-encapsulated thermal energy storage phase change material

RSC Advances ◽  
2014 ◽  
Vol 4 (74) ◽  
pp. 39552-39557 ◽  
Author(s):  
Zhonghao Rao ◽  
Xinyu You ◽  
Yutao Huo ◽  
Xinjian Liu
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Thermophysical Properties ◽  
Phase Change Materials ◽  
Dissipative Particle Dynamics ◽  
Particle Dynamics ◽  
Change Material

The nano-encapsulated phase change materials (PCM), which have several good thermophysical properties, were proposed as potential for thermal energy storage.

Phase-Change Materials and Building Energy Saving

2013 ◽  
Vol 683 ◽  
pp. 106-109
Author(s):  
Xiao Gang Zhao ◽  
Ying Pan
Keyword(s):  
Phase Change ◽  
Energy Saving ◽  
Phase Change Material ◽  
Building Materials ◽  
Phase Change Materials ◽  
Heat Storage ◽  
Building Energy ◽  
Storage Performance ◽  
Building Energy Saving ◽  
Change Material

Phase change materials, abbreviated as PCM, due to the excellent heat storage performance, have been used as building materials and got more and more attention in recent years. The article introduce the building application of phase change material, and discuss its contribution to the building energy saving.

scholarly journals Effect of phase change material using in building thermal comfort applications through several climate conditions.

2020 ◽  
Vol 170 ◽  
pp. 01007
Author(s):  
Marwa El Yassi ◽  
Ikram El Abbassi ◽  
Alexandre Pierre ◽  
Yannick Melinge
Keyword(s):  
Thermal Comfort ◽  
Phase Change ◽  
Phase Change Material ◽  
Phase Change Materials ◽  
Chemical Change ◽  
Thermal Inertia ◽  
Temperature Fluctuations ◽  
High Energy ◽  
Climate Conditions ◽  
Change Material

Nowadays, buildings sector contributes to climate change by consuming a considerable amount of energy to afford thermal comfort for occupants. Passive cooling techniques are a promising solution to increase the thermal inertia of building envelopes, and reduce temperature fluctuations. The phase change materials, known as PCM, can be efficiently employed to this purpose, because of their high energy storage density. Among the various existing solutions, the present study is dedicated to solid-liquid phase change materials. Temperature evolution (according to their defined temperature range) induces the chemical change of the material and its state. For building applications, the chemical transition can be accomplished from liquid to solid (solidification) and from solid to liquid (melting). In fact, this paper presents a comparative thermal analysis of several test rooms with and without phase change materials embedded in a composite wallboard in different climates. The used PCM consist in a flexible sheet of 5 mm thickness (Energain, manufactured by the company DuPont de Nemours). The main properties of such a commercial solution have been delivered by the manufacturer and from analyses. The room model was validated using laboratory instrumentations and measurements of a test room in four cities: Lyon; Reading and Casablanca. Results indicate that this phase change material board can absorb heat gains and also reduce the indoor air temperature fluctuations during daytime. The aim of the study is to show the benefits of this layer with phase change material and compare it in different climatic zones.

Sign in / Sign up

Export Citation Format

Share Document