scholarly journals Reconstruction of the thermal properties in a wave-type model of bio-heat transfer

2020 ◽  
Vol 30 (12) ◽  
pp. 5143-5167
Author(s):  
Moataz Alosaimi ◽  
Daniel Lesnic ◽  
Jitse Niesen
Keyword(s):  
Heat Transfer ◽  
Physical Properties ◽  
Thermal Wave ◽  
Wave Model ◽  
Temperature Measurements ◽  
Dimensionless Parameters ◽  
Content Type ◽  
Boundary Temperature ◽  
Dimensional Parameters ◽  
Thermo Physical Properties

Purpose This study aims to at numerically retrieve five constant dimensional thermo-physical properties of a biological tissue from dimensionless boundary temperature measurements. Design/methodology/approach The thermal-wave model of bio-heat transfer is used as an appropriate model because of its realism in situations in which the heat flux is extremely high or low and imposed over a short duration of time. For the numerical discretization, an unconditionally stable finite difference scheme used as a direct solver is developed. The sensitivity coefficients of the dimensionless boundary temperature measurements with respect to five constant dimensionless parameters appearing in a non-dimensionalised version of the governing hyperbolic model are computed. The retrieval of those dimensionless parameters, from both exact and noisy measurements, is successfully achieved by using a minimization procedure based on the MATLAB optimization toolbox routine lsqnonlin. The values of the five-dimensional parameters are recovered by inverting a nonlinear system of algebraic equations connecting those parameters to the dimensionless parameters whose values have already been recovered. Findings Accurate and stable numerical solutions for the unknown thermo-physical properties of a biological tissue from dimensionless boundary temperature measurements are obtained using the proposed numerical procedure. Research limitations/implications The current investigation is limited to the retrieval of constant physical properties, but future work will investigate the reconstruction of the space-dependent blood perfusion coefficient. Practical implications As noise inherently present in practical measurements is inverted, the paper is of practical significance and models a real-world situation. Social implications The findings of the present paper are of considerable significance and interest to practitioners in the biomedical engineering and medical physics sectors. Originality/value In comparison to Alkhwaji et al. (2012), the novelty and contribution of this work are as follows: considering the more general and realistic thermal-wave model of bio-heat transfer, accounting for a relaxation time; allowing for the tissue to have a finite size; and reconstructing five thermally significant dimensional parameters.

Effect of geometrical and temperature-dependence parameters on forced convection of a nanofluid in a micro-channel heat sink

2016 ◽  
Vol 13 (5) ◽  
pp. 399-406 ◽  
Author(s):  
Rabah Nebbati ◽  
Mahfoud Kadja
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Physical Properties ◽  
Forced Convection ◽  
Heat Sink ◽  
Volume Fraction ◽  
Micro Channel ◽  
Temperature Dependent ◽  
Content Type ◽  
Thermo Physical Properties

Purpose The purpose of this study is the numerical prediction of the thermal and hydraulic characteristics (Nusselt number and shear stress) of a forced convection laminar flow through a rectangular micro-channel heat sink, using constant and temperature-dependent thermo-physical properties. The effects of the solids volume fraction and the size of the micro-channel on heat transfer enhancement have also been investigated. Design/methodology/approach The authors use the flow of a water-Al2O3 nanofluid and a single-phase approach. The equations are solved using the commercial code Fluent Version 6.3. This code uses the finite volume approach to solve the equations subject to the boundary conditions, which govern three-dimensional conjugate convection-conduction heat transfer model. The physical domain was meshed using the code GAMBIT. The mesh used is non-uniform and was obtained by sweeping in the Z direction an X-Y surface meshed with QUAD/pave type cells. Findings The results clearly show that the inclusion of nanoparticles produces a considerable increase in the heat transfer. Also, the temperature-dependent models present higher values of local and average Nusselt number than in the case of constant thermo-physical properties, and an increase in the channel dimensions leads to an important increase in heat transfer. Consequently, we ensure a better cooling of the base of the micro-channel heat sink. Research limitations/implications Because of the settling of nanoparticles, the research results may not be generalized to high values of solids volume fraction. Therefore, researchers are encouraged to find other techniques of cooling when the heat loads exceed values that cannot be dissipated using nanonofluids. Practical implications The paper includes implications for the miniaturization of electronic devices such as in microprocessors or those used in robotics and automotive industries, where continually increasing power densities are requiring more innovative techniques of heat dissipation from a small area and small coolant requirements. Originality/value This paper shows the implementation of variable property nanofluid models in CFD commercial codes.

Effect of wall conduction on the heat transfer characteristics of supercritical n-decane in a horizontal rectangular pipe for cooling of a scramjet combustor

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yong Li ◽  
Gongnan Xie ◽  
Bengt Ake Sunden
Keyword(s):  
Heat Transfer ◽  
Physical Properties ◽  
Secondary Flow ◽  
Transverse Velocity ◽  
Convection Heat Transfer ◽  
Numerical Results ◽  
Fluid Temperature ◽  
Content Type ◽  
Scramjet Combustor ◽  
Thermo Physical Properties

Purpose The purpose of this paper is to numerically study the influence of wall conduction on the heat transfer of supercritical n-decane in the active regenerative cooling channels. Design/methodology/approach A horizontally placed rectangular pipe with a solid zone and another one without a solid zone were used. A drastic variation of thermo-physical properties was emphatically addressed. After the verification of mesh and turbulence models comparing with the experimental results, a mesh number of 4.5 M and the low Reynolds number SST k-ω turbulence model were chosen. The solution of the governing equations and the acquisition of the numerical results were executed by the commercial software FLUENT 2020 R1. Findings The numerical results indicate that there is a heat transfer deterioration (HTD) potential for the upper wall, lower wall and sidewall with the decrease of mass flux. Due to wall conduction, the distribution of the fluid temperature at spanwise-normal planes becomes uniform and this feature also takes advantage of the relatively uniform transverse velocity. For the streamwise-normal planes, the low fluid temperature appears close to the upper wall at the region near the sidewall and vice versa for the region near the centre. Undoubtedly, the secondary flow at the cross-section plays a crucial role in this process and the relatively cool mainstream is affected by the vortices. Originality/value This study warns that the wall conduction must be considered in the practical design and thermal optimization due to the sensibility of thermo-physical properties to the heat flux. The secondary flow caused by the buoyancy force (gravity) plays a significant role in the supercritical heat transfer and mixed convection heat transfer should be further studied.

Heat Transfer and Crystallization Modeling during Compression Molding of Thermoplastic Composite Parts

2015 ◽  
Vol 651-653 ◽  
pp. 1507-1512 ◽  
Author(s):  
Jalal Faraj ◽  
Baptiste Pignon ◽  
Jean Luc Bailleul ◽  
Nicolas Boyard ◽  
Didier Delaunay ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Physical Properties ◽  
Volume Fraction ◽  
Thermoplastic Composite ◽  
Large Temperature ◽  
Process Conditions ◽  
Thermoplastic Resin ◽  
Whole Process ◽  
Low Viscosity ◽  
Thermo Physical Properties

We present in this paper, the coupling of heat transfer to the crystallization of composite in a closed mold. The composite is based on thermoplastic resin (low viscosity PA 66) with glass fiber (50% volume fraction). In order to realize this coupling, an accurate characterizationof thermo physical properties in process conditions, especially in the molten and solid state is needed. In addition, theidentification of the parameters of crystallization kinetics is required. Therefore, we present the methods that were used to study the thermo physical properties as the thermal conductivity, heat capacity and the specific volume. Moreover, the kinetic of crystallization was estimated over a large temperature range by using Flash DSC and classical DSC. In order to validate the measurements, the whole process was modeled by finite elements. The model includes the resolution of the strong coupling between the heat transfer and crystallization. Finally, the experimental and numerical results were compared.

Numerical Simulation of Bubble Growth During Nanofluid Flow Boiling in a Microchannel

2014 ◽  
Author(s):  
Arman Khalighi ◽  
Matthew Blomquist ◽  
Abhijit Mukherjee
Keyword(s):  
Heat Transfer ◽  
Physical Properties ◽  
Heat Dissipation ◽  
Flow Boiling ◽  
Contact Angles ◽  
Electronic Systems ◽  
Simulation Based ◽  
Fluid Media ◽  
Thermo Physical Properties ◽  
Current Heat

In recent years, heat dissipation in micro-electronic systems has become a significant design limitation for many component manufactures. As electronic devices become smaller, the amount of heat generation per unit area increases significantly. Current heat dissipation systems have implemented forced convection with both air and fluid media. However, nanofluids may present an advantageous and ideal cooling solution. In the present study, a model has been developed to estimate the enhancement of the heat transfer when nanoparticles are added to a base fluid, in a single microchannel. The model assumes a homogeneous nanofluid mixture, with thermo-physical properties based on previous experimental and simulation based data. The effect of nanofluid concentration on the dynamics of the bubble has been simulated. The results show the change in bubble contact angles due to deposition of the nanoparticles has more effect on the wall heat transfer compared to the effect of thermo-physical properties change by using nanofluid.

scholarly journals Experimental Investigation of Thermo-Physical Properties of Tri-Hybrid Nanoparticles in Water-Ethylene Glycol Mixture

2021 ◽  
Vol 18 (8) ◽  
Author(s):  
Anwar Ilmar RAMADHAN ◽  
Wan Hamzah AZMI ◽  
Rizalman MAMAT
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Ethylene Glycol ◽  
Physical Properties ◽  
Dynamic Viscosity ◽  
Volume Concentration ◽  
Hybrid Nanoparticles ◽  
Maximum Enhancement ◽  
Hybrid Nanofluids ◽  
Thermo Physical Properties

In recent years, research has focused on enhancing the thermo-physical properties of a single component nanofluid. Therefore, hybrid or composite nanofluids have been developed to improve heat transfer performance. The thermo-physical properties of the Al2O3-TiO2-SiO2 nanoparticles suspended in a base of water (W) and ethylene glycol (EG) at constant volume ratio of 60:40 and different volume concentrations were investigated. The experiment was conducted for the volume concentrations of 0.05, 0.1, 0.2, and 0.3% of Al2O3-TiO2-SiO2 nanofluids at different temperatures of 30, 40, 50, 60, and 70 °C. Thermal conductivity and dynamic viscosity measurements were carried out at temperatures ranging from 30 to 70 °C by using KD2 Pro Thermal Properties Analyzer and Brookfield LVDV III Ultra Rheometer, respectively. The highest thermal conductivity for tri-hybrid nanofluids was obtained at 0.3% volume concentration, and the maximum enhancement was increased up to 9% higher than the base fluid (EG/W). Tri-hybrid nanofluids with a volume concentration of 0.05% gave the lowest effective thermal conductivity of 4.8 % at 70 °C temperature. Meanwhile, the dynamic viscosity of the tri-hybrid nanofluids was influenced by volume concentration and temperature. Furthermore, tri-hybrid nanofluids behaved as a Newtonian fluid for volume concentrations from 0.05 to 3.0%. The properties enhancement ratio (PER) estimated that the tri-hybrid nanofluids will aid in heat transfer for all samples in the present. The new correlations for thermal conductivity and dynamic viscosity of tri-hybrid nanofluids were developed with minimum deviation. As a conclusion, the combination of the enhancement in thermal conductivity and dynamic viscosity for tri-hybrid at 0.3% volume concentration was found the optimum condition with more advantage for heat transfer than other concentrations.

A comprehensive review on the impact of nanofluid in solar photovoltaic/thermal system

2021 ◽  
pp. 095440622110556
Author(s):  
E Manikandan ◽  
K Mayandi ◽  
M Sivasubramanian ◽  
N Rajini ◽  
S Rajesh ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Physical Properties ◽  
Energy Resource ◽  
Green Energy ◽  
Electrical Performance ◽  
Solar Photovoltaic ◽  
Solar Pv ◽  
The Impact ◽  
Thermo Physical Properties ◽  
T System

Solar energy is a major renewable energy resource used in power production, heating processes, and other applications such as domestic and industrial utilization. It is an abundant form of green energy. Different techniques have been made for energy conversion and one among them is solar photovoltaic/thermal (PV/T) system. Unfortunately, the greatest cause of concern is the rise in temperature of solar PV cells, which will have a negative effect on electrical performance. Thereby, eliminating excess heat on PV cells with heat transfer fluids to lower the temperature of the cells can improve electrical efficiency. A nanofluid is a promising heat transfer fluid to effectively enhance the system efficacy compared with conventional fluids. As the nanoparticle size is very small, the surface area of the nanoparticle is large so it enhances the heat transfer rate. Thereby, recently it has taken on a new dimension for research studies to enhance its thermal behavior for engineering application. This review paper discusses about the importance of nanofluid in solar PV/T system and advantages of employing nanofluid in PV/T system which has high thermo-physical properties. Nanoparticle and nanofluid preparation methods were presented. The thermo-physical properties like thermal conductivity, viscosity, density, and specific heat capacity were also discussed.

Numerical Study of Turbulent Convective in Upward Flows of Supercritical Water in the Triangular Lattice Fuel Rod Bundle

2014 ◽  
Author(s):  
Mohsen Modirshanechi ◽  
Kamel Hooman ◽  
Iman Ashtiani Abdi ◽  
Pourya Forooghi
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Nusselt Number ◽  
Turbulent Boundary Layer ◽  
Physical Properties ◽  
Supercritical Water ◽  
Triangular Lattice ◽  
Rod Bundles ◽  
Fuel Rod ◽  
Thermo Physical Properties

Convection heat transfer in upward flows of supercritical water in triangular tight fuel rod bundles is numerically investigated by using the commercial CFD code, ANSYS Fluent© 14.5. The fuel rod with an inner diameter of 7.6 mm and the pitch-to-diameter ratio (P/D) of 1.14 is studied for mass flux ranging between 550 and 1050 kg/m2s and heat flux of 560 kW/m2 at pressures of 25 MPa. V2F eddy viscosity turbulence model is used and, to isolate the effect of buoyancy, constant values are used for thermo-physical properties with Boussinesq approximation for the density variation with temperature in the momentum equations. The computed Nusselt number normalized by that of the same Reynolds number with no buoyancy against the buoyancy parameter proposed by Jackson and Hall’s criterion. Mentioned results are compared with V2F turbulence model whereas strong nonmonotonic variation of the thermo-physical properties as function of temperature have been applied to the commercial CFD code using user defined function (UDF) technique. A significant decrease in Nusselt number was observed in the range of 10-6<Grq/Reb3.425Prb0.8<5×10-6 before entering a serious heat transfer deterioration regime. Based on an analysis of the shear-stress distribution in the turbulent boundary layer and the significant variation of the specific heat across the turbulent boundary layer, it is found that the same mechanism that leads to impairment of turbulence production in concentric annular pipes is present in triangular lattice fuel rod bundles at supercritical pressure.

Sign in / Sign up

Export Citation Format

Share Document