A comprehensive review on the impact of nanofluid in solar photovoltaic/thermal system

2021 ◽  
pp. 095440622110556
Author(s):  
E Manikandan ◽  
K Mayandi ◽  
M Sivasubramanian ◽  
N Rajini ◽  
S Rajesh ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Physical Properties ◽  
Energy Resource ◽  
Green Energy ◽  
Electrical Performance ◽  
Solar Photovoltaic ◽  
Solar Pv ◽  
The Impact ◽  
Thermo Physical Properties ◽  
T System

Solar energy is a major renewable energy resource used in power production, heating processes, and other applications such as domestic and industrial utilization. It is an abundant form of green energy. Different techniques have been made for energy conversion and one among them is solar photovoltaic/thermal (PV/T) system. Unfortunately, the greatest cause of concern is the rise in temperature of solar PV cells, which will have a negative effect on electrical performance. Thereby, eliminating excess heat on PV cells with heat transfer fluids to lower the temperature of the cells can improve electrical efficiency. A nanofluid is a promising heat transfer fluid to effectively enhance the system efficacy compared with conventional fluids. As the nanoparticle size is very small, the surface area of the nanoparticle is large so it enhances the heat transfer rate. Thereby, recently it has taken on a new dimension for research studies to enhance its thermal behavior for engineering application. This review paper discusses about the importance of nanofluid in solar PV/T system and advantages of employing nanofluid in PV/T system which has high thermo-physical properties. Nanoparticle and nanofluid preparation methods were presented. The thermo-physical properties like thermal conductivity, viscosity, density, and specific heat capacity were also discussed.

Heat Transfer and Crystallization Modeling during Compression Molding of Thermoplastic Composite Parts

2015 ◽  
Vol 651-653 ◽  
pp. 1507-1512 ◽  
Author(s):  
Jalal Faraj ◽  
Baptiste Pignon ◽  
Jean Luc Bailleul ◽  
Nicolas Boyard ◽  
Didier Delaunay ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Physical Properties ◽  
Volume Fraction ◽  
Thermoplastic Composite ◽  
Large Temperature ◽  
Process Conditions ◽  
Thermoplastic Resin ◽  
Whole Process ◽  
Low Viscosity ◽  
Thermo Physical Properties

We present in this paper, the coupling of heat transfer to the crystallization of composite in a closed mold. The composite is based on thermoplastic resin (low viscosity PA 66) with glass fiber (50% volume fraction). In order to realize this coupling, an accurate characterizationof thermo physical properties in process conditions, especially in the molten and solid state is needed. In addition, theidentification of the parameters of crystallization kinetics is required. Therefore, we present the methods that were used to study the thermo physical properties as the thermal conductivity, heat capacity and the specific volume. Moreover, the kinetic of crystallization was estimated over a large temperature range by using Flash DSC and classical DSC. In order to validate the measurements, the whole process was modeled by finite elements. The model includes the resolution of the strong coupling between the heat transfer and crystallization. Finally, the experimental and numerical results were compared.

Numerical Simulation of Bubble Growth During Nanofluid Flow Boiling in a Microchannel

2014 ◽  
Author(s):  
Arman Khalighi ◽  
Matthew Blomquist ◽  
Abhijit Mukherjee
Keyword(s):  
Heat Transfer ◽  
Physical Properties ◽  
Heat Dissipation ◽  
Flow Boiling ◽  
Contact Angles ◽  
Electronic Systems ◽  
Simulation Based ◽  
Fluid Media ◽  
Thermo Physical Properties ◽  
Current Heat

In recent years, heat dissipation in micro-electronic systems has become a significant design limitation for many component manufactures. As electronic devices become smaller, the amount of heat generation per unit area increases significantly. Current heat dissipation systems have implemented forced convection with both air and fluid media. However, nanofluids may present an advantageous and ideal cooling solution. In the present study, a model has been developed to estimate the enhancement of the heat transfer when nanoparticles are added to a base fluid, in a single microchannel. The model assumes a homogeneous nanofluid mixture, with thermo-physical properties based on previous experimental and simulation based data. The effect of nanofluid concentration on the dynamics of the bubble has been simulated. The results show the change in bubble contact angles due to deposition of the nanoparticles has more effect on the wall heat transfer compared to the effect of thermo-physical properties change by using nanofluid.

scholarly journals Reconstruction of the thermal properties in a wave-type model of bio-heat transfer

2020 ◽  
Vol 30 (12) ◽  
pp. 5143-5167
Author(s):  
Moataz Alosaimi ◽  
Daniel Lesnic ◽  
Jitse Niesen
Keyword(s):  
Heat Transfer ◽  
Physical Properties ◽  
Thermal Wave ◽  
Wave Model ◽  
Temperature Measurements ◽  
Dimensionless Parameters ◽  
Content Type ◽  
Boundary Temperature ◽  
Dimensional Parameters ◽  
Thermo Physical Properties

Purpose This study aims to at numerically retrieve five constant dimensional thermo-physical properties of a biological tissue from dimensionless boundary temperature measurements. Design/methodology/approach The thermal-wave model of bio-heat transfer is used as an appropriate model because of its realism in situations in which the heat flux is extremely high or low and imposed over a short duration of time. For the numerical discretization, an unconditionally stable finite difference scheme used as a direct solver is developed. The sensitivity coefficients of the dimensionless boundary temperature measurements with respect to five constant dimensionless parameters appearing in a non-dimensionalised version of the governing hyperbolic model are computed. The retrieval of those dimensionless parameters, from both exact and noisy measurements, is successfully achieved by using a minimization procedure based on the MATLAB optimization toolbox routine lsqnonlin. The values of the five-dimensional parameters are recovered by inverting a nonlinear system of algebraic equations connecting those parameters to the dimensionless parameters whose values have already been recovered. Findings Accurate and stable numerical solutions for the unknown thermo-physical properties of a biological tissue from dimensionless boundary temperature measurements are obtained using the proposed numerical procedure. Research limitations/implications The current investigation is limited to the retrieval of constant physical properties, but future work will investigate the reconstruction of the space-dependent blood perfusion coefficient. Practical implications As noise inherently present in practical measurements is inverted, the paper is of practical significance and models a real-world situation. Social implications The findings of the present paper are of considerable significance and interest to practitioners in the biomedical engineering and medical physics sectors. Originality/value In comparison to Alkhwaji et al. (2012), the novelty and contribution of this work are as follows: considering the more general and realistic thermal-wave model of bio-heat transfer, accounting for a relaxation time; allowing for the tissue to have a finite size; and reconstructing five thermally significant dimensional parameters.

scholarly journals Investigation of Auxiliary Power Potentials of Solar Photovoltaic Applications of Dry Bulk Carrier Ships

2019 ◽  
Author(s):  
Wandifa Saidyleigh ◽  
A. I. Olcer ◽  
R Baumler
Keyword(s):  
Alternative Fuels ◽  
Fossil Fuels ◽  
Energy Resource ◽  
Population Expansion ◽  
Solar Photovoltaic ◽  
Solar Pv ◽  
International Shipping ◽  
Cost Of Energy ◽  
Bulk Carriers ◽  
Photovoltaic Technology

The increase in world seaborne trade over the past decade due to global economic and population expansion has resulted in a corresponding increase of world shipping fleet with even greater size and power requirements. The bulk of these ships use cheap and widely available fossil fuels, mainly oil for operation but which has deleterious effects on the environment. In order to address environmental concerns in the shipping sector, the International Maritime Organization (IMO), responding to the global call to reduce greenhouse gases emissions from international shipping adopted technical and operational measures. These are to ensure efficient energy management on ships and have led to the application of many innovative technologies including the use of renewable energies and alternative fuels on ships to minimize fossil fuel consumption and reduce emissions. However, in order to achieve a substantial emissions reduction in international shipping, the potential applicability of a technology which utilizes a universal renewable energy resource on the largest ship type in international shipping fleet should be investigated. This research focuses on investigating the potential of Solar Photovoltaic technology on dry bulk carriers using a developed methodology and Levelised cost of energy concept as the basis for comparison. The results of this research can be used to guide decision makers about the potentials of Solar Photovoltaic technology on dry bulk carriers in general whilst its developed methodology may be useful in the specific context for determining which ships and under what circumstances solar PV is an option.

scholarly journals Experimental Investigation of Thermo-Physical Properties of Tri-Hybrid Nanoparticles in Water-Ethylene Glycol Mixture

2021 ◽  
Vol 18 (8) ◽  
Author(s):  
Anwar Ilmar RAMADHAN ◽  
Wan Hamzah AZMI ◽  
Rizalman MAMAT
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Ethylene Glycol ◽  
Physical Properties ◽  
Dynamic Viscosity ◽  
Volume Concentration ◽  
Hybrid Nanoparticles ◽  
Maximum Enhancement ◽  
Hybrid Nanofluids ◽  
Thermo Physical Properties

In recent years, research has focused on enhancing the thermo-physical properties of a single component nanofluid. Therefore, hybrid or composite nanofluids have been developed to improve heat transfer performance. The thermo-physical properties of the Al2O3-TiO2-SiO2 nanoparticles suspended in a base of water (W) and ethylene glycol (EG) at constant volume ratio of 60:40 and different volume concentrations were investigated. The experiment was conducted for the volume concentrations of 0.05, 0.1, 0.2, and 0.3% of Al2O3-TiO2-SiO2 nanofluids at different temperatures of 30, 40, 50, 60, and 70 °C. Thermal conductivity and dynamic viscosity measurements were carried out at temperatures ranging from 30 to 70 °C by using KD2 Pro Thermal Properties Analyzer and Brookfield LVDV III Ultra Rheometer, respectively. The highest thermal conductivity for tri-hybrid nanofluids was obtained at 0.3% volume concentration, and the maximum enhancement was increased up to 9% higher than the base fluid (EG/W). Tri-hybrid nanofluids with a volume concentration of 0.05% gave the lowest effective thermal conductivity of 4.8 % at 70 °C temperature. Meanwhile, the dynamic viscosity of the tri-hybrid nanofluids was influenced by volume concentration and temperature. Furthermore, tri-hybrid nanofluids behaved as a Newtonian fluid for volume concentrations from 0.05 to 3.0%. The properties enhancement ratio (PER) estimated that the tri-hybrid nanofluids will aid in heat transfer for all samples in the present. The new correlations for thermal conductivity and dynamic viscosity of tri-hybrid nanofluids were developed with minimum deviation. As a conclusion, the combination of the enhancement in thermal conductivity and dynamic viscosity for tri-hybrid at 0.3% volume concentration was found the optimum condition with more advantage for heat transfer than other concentrations.

scholarly journals Modeling of Photovoltaic Module Using the MATLAB

2019 ◽  
Vol 9 ◽  
pp. 59-69
Author(s):  
Alok Dhaundiyal ◽  
Divine Atsu
Keyword(s):  
Standard Test ◽  
Electrical Performance ◽  
Photovoltaic Module ◽  
Solar Pv ◽  
Pv Module ◽  
Proposed Model ◽  
Current Voltage ◽  
Pv Modules ◽  
The Impact ◽  
The Mathematical Model

This paper presents the modeling and simulation of the characteristics and electrical performance of photovoltaic (PV) solar modules. Genetic coding is applied to obtain the optimized values of parameters within the constraint limit using the software MATLAB. A single diode model is proposed, considering the series and shunt resistances, to study the impact of solar irradiance and temperature on the power-voltage (P-V) and current-voltage (I-V) characteristics and predict the output of solar PV modules. The validation of the model under the standard test conditions (STC) and different values of temperature and insolation is performed, as well as an evaluation using experimentally obtained data from outdoor operating PV modules. The obtained results are also subjected to comply with the manufacturer’s data to ensure that the proposed model does not violate the prescribed tolerance range. The range of variation in current and voltage lies in the domain of 8.21 – 8.5 A and 22 – 23 V, respectively; while the predicted solutions for current and voltage vary from 8.28 – 8.68 A and 23.79 – 24.44 V, respectively. The measured experimental power of the PV module estimated to be 148 – 152 W is predicted from the mathematical model and the obtained values of simulated solution are in the domain of 149 – 157 W. The proposed scheme was found to be very effective at determining the influence of input factors on the modules, which is difficult to determine through experimental means.

Numerical Study of Turbulent Convective in Upward Flows of Supercritical Water in the Triangular Lattice Fuel Rod Bundle

2014 ◽  
Author(s):  
Mohsen Modirshanechi ◽  
Kamel Hooman ◽  
Iman Ashtiani Abdi ◽  
Pourya Forooghi
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Nusselt Number ◽  
Turbulent Boundary Layer ◽  
Physical Properties ◽  
Supercritical Water ◽  
Triangular Lattice ◽  
Rod Bundles ◽  
Fuel Rod ◽  
Thermo Physical Properties

Convection heat transfer in upward flows of supercritical water in triangular tight fuel rod bundles is numerically investigated by using the commercial CFD code, ANSYS Fluent© 14.5. The fuel rod with an inner diameter of 7.6 mm and the pitch-to-diameter ratio (P/D) of 1.14 is studied for mass flux ranging between 550 and 1050 kg/m2s and heat flux of 560 kW/m2 at pressures of 25 MPa. V2F eddy viscosity turbulence model is used and, to isolate the effect of buoyancy, constant values are used for thermo-physical properties with Boussinesq approximation for the density variation with temperature in the momentum equations. The computed Nusselt number normalized by that of the same Reynolds number with no buoyancy against the buoyancy parameter proposed by Jackson and Hall’s criterion. Mentioned results are compared with V2F turbulence model whereas strong nonmonotonic variation of the thermo-physical properties as function of temperature have been applied to the commercial CFD code using user defined function (UDF) technique. A significant decrease in Nusselt number was observed in the range of 10-6<Grq/Reb3.425Prb0.8<5×10-6 before entering a serious heat transfer deterioration regime. Based on an analysis of the shear-stress distribution in the turbulent boundary layer and the significant variation of the specific heat across the turbulent boundary layer, it is found that the same mechanism that leads to impairment of turbulence production in concentric annular pipes is present in triangular lattice fuel rod bundles at supercritical pressure.

scholarly journals Improved Thermophysical Properties and Energy Efficiency of Aqueous Ionic Liquid/MXene Nanofluid in a Hybrid PV/T Solar System

Nanomaterials ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 1372 ◽  
Author(s):  
Likhan Das ◽  
Khairul Habib ◽  
R. Saidur ◽  
Navid Aslfattahi ◽  
Syed Mohd Yahya ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Ionic Liquid ◽  
Palm Oil ◽  
Thermophysical Properties ◽  
Conductivity Measurement ◽  
Optimum Concentration ◽  
Heat Transfer Fluid ◽  
Solar Pv ◽  
T System

In recent years, solar energy technologies have developed an emerging edge. The incessant research to develop a power source alternative to fossil fuel because of its scarcity and detrimental effects on the environment is the main driving force. In addition, nanofluids have gained immense interest as superior heat transfer fluid in solar technologies for the last decades. In this research, a binary solution of ionic liquid (IL) + water based ionanofluids is formulated successfully with two dimensional MXene (Ti3C2) nano additives at three distinct concentrations of 0.05, 0.10, and 0.20 wt % and the optimum concentration is used to check the performance of a hybrid solar PV/T system. The layered structure of MXene and high absorbance of prepared nanofluids have been perceived by SEM and UV–vis respectively. Rheometer and DSC are used to assess the viscosity and heat capacity respectively while transient hot wire technique is engaged for thermal conductivity measurement. A maximum improvement of 47% in thermal conductivity is observed for 0.20 wt % loading of MXene. Furthermore, the viscosity is found to rise insignificantly with addition of Ti3C2 by different concentrations. Conversely, viscosity decreases substantially as the temperature increases from 20 °C to 60 °C. However, based on their thermophysical properties, 0.20 wt % is found to be the optimum concentration. A comparative analysis in terms of heat transfer performance with three different nanofluids in PV/T system shows that, IL+ water/MXene ionanofluid exhibits highest thermal, electrical, and overall heat transfer efficiency compared to water/alumina, palm oil/MXene, and water alone. Maximum electrical efficiency and thermal efficiency are recorded as 13.95% and 81.15% respectively using IL + water/MXene, besides that, heat transfer coefficients are also noticed to increase by 12.6% and 2% when compared to water/alumina and palm oil/MXene respectively. In conclusion, it can be demonstrated that MXene dispersed ionanofluid might be great a prospect in the field of heat transfer applications since they can augment the heat transfer rate considerably which improves system efficiency.

Sign in / Sign up

Export Citation Format

Share Document