scholarly journals Studying the relationship between causes and effects of poor communication in construction projects using PLS-SEM approach

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yaser Gamiljj ◽  
Ismail Abd Rahman

Purpose The purpose of this paper is to develop a structural relationship model to study the relationship between causes and effects of poor communication and information exchange in construction projects using Smart-PLS. Design/methodology/approach The first method of this research is to identify the causes and effects factors of poor communication in construction projects from the extant of literature. The data used to develop the model was collected using a questionnaire survey, which targeted construction practitioners in the Malaysian construction industry. A five-point Likert type scale was used to rate the significance of the factors. The factors were classified under their relevant construct/group using exploratory factor analysis. A hypothetical model was developed and then transformed into Smart-PLS in which the hypothetical model suggested that each group of the cause factors has a direct impact on the effect groups. The hypothesis was tested using t-values and p-values. The model was assessed for its inner and outer components and achieved the threshold criterion. Further, the model was verified by engaging 14 construction experts to verify its applicability in the construction project setting. Findings The study developed a structural equation model to clarify the relationships between causes and effects of poor communication in construction projects. The model explained the degree of relationships among causes and effects of poor communication in construction projects. Originality/value The published academic and non-academic literature introduced many studies on the issue of communication including the definitions, importance, barriers to effective communication and means of poor communication. However, these studies ended up only on the general issue of communication lacking an in-depth investigation of the causes and effects of poor communication in the construction industry. The study implemented advanced structural modeling to study the causes and effects. The questionnaire, the data and concluding results fill the identified research gap of this study. The addressed issue is also of interest because communication is considered one of the main knowledge areas in construction management.

2020 ◽  
Vol 31 (5) ◽  
pp. 781-800
Author(s):  
Wenxue Lu ◽  
Yuxin Wei ◽  
Rui Wang

Purpose This paper aims to reveal the effects of an organisation’s bargaining power on its negotiating behaviours (including integrating, obliging, compromising, dominating and avoiding) in the context of inter-organisational conflict in construction projects and investigate how organisational power distance orientation moderates the relationship between the organisation’s bargaining power and its negotiating behaviours. Design/methodology/approach The authors conducted a questionnaire survey among practitioners in the Chinese construction industry with the final sample consisting of 219 responses. A structural equation model was used to analyse the data and test the hypotheses. Findings The results reveal that an organisation’s bargaining power is positively associated with dominating and integrating behaviours but negatively associated with obliging and avoiding behaviours. Additionally, bargaining power is found to be negatively associated with compromising behaviour when the organisation has a high power distance orientation. Finally, a higher degree of power distance orientation strengthens the positive effect bargaining power has on dominating behaviour. Practical implications The findings can help practitioners to predict the negotiating behaviours of a counterpart according to its bargaining power and the power distance in its organisational culture. This can then enable practitioners to adjust their strategies accordingly and steer the negotiations towards a win–win outcome. Originality/value This study applies the approach-inhibition theory of power to inter-organisational negotiations and empirically tests the relationship between an organisation’s bargaining power and its negotiating behaviours in the context of construction projects. Additionally, this study reveals that organisational power distance orientation moderates this relationship.


Kybernetes ◽  
2016 ◽  
Vol 45 (6) ◽  
pp. 866-883 ◽  
Author(s):  
Lei Guo ◽  
Huimin Li ◽  
Peng Li ◽  
Chengyi Zhang

Purpose – The purpose of this paper is to find how those uncertainty factors influence transaction costs generated and to identify ways to minimize the transaction costs borne by the construction owner. Design/methodology/approach – The literature indicates that there is no consensus on a standard definition of transaction costs in the construction industry. A detailed literature review of research work on transaction costs in construction is conducted in order to identify the determinants of transaction costs in construction projects. A structural equation model is tested on data collected by means of a survey administered to construction owners. Findings – The findings indicate that the transaction costs borne by the owner can be minimized if the owner minimizes the uncertainties inherent in the construction project by making sure the engineering design is as complete as possible before bids are sought from contractors; harmonious relationships between project participants; fair risk allocation; have experience in similar type projects; and contractor selection practices that routinely detect irregular behavior. Research limitations/implications – The data used in this research are primarily based on the experiences of public owners and the markets in which they operate; a larger representation of private owners could make the conclusions more general. Another limitation of the study is that it relies on a survey of opinions rather than actual records of costs and other hard data. Practical implications – No empirical study has ever been conducted of transaction-related issues in the construction industry because of the lack of a common understanding of transaction cost. This paper provides the groundwork for such a study. Originality/value – This paper attempts to reconcile the many determinants of transaction costs in construction projects under uncertainty considered by different researchers in a multitude of research studies.


2018 ◽  
Vol 15 (4) ◽  
pp. 500-513
Author(s):  
Seniz Özhan ◽  
Nevin Altug ◽  
Eylem Deniz

Purpose The purpose of this paper is to examine the joint effect of two composite characteristics –openness to experience (OE) and nostalgia proneness (NP) – on product involvement (PI) and whether brand loyalty (BL) is a result of this PI. Design/methodology/approach In accordance with this purpose, a model suggesting that OE dimension of the five-factor model and NP influences PI and PI influences BL was developed and tested. The data used in the study were obtained from 1,392 participants from the Thrace region of Turkey. The authors use a structural equation model to test and confirm hypothesis. Findings OE influences PI and hence BL. On the other hand, it has been concluded that NP has no significant influence on PI. Research limitations/implications This is the first study to examine the influence of OE, one of the personality traits, and NP on BL. In this study, only OE, which is one of the five-factor personality traits, has been examined. Studies in the future may research the relationship between other personality traits and NP, PI and BL. Practical implications This paper provides managerial insights into why consumers’ personality traits and NP need to be taken into consideration in creating BL. Originality/value To the best of authors’ knowledge, the influence of OE and NP on BL has not been addressed in the current literature. Personality traits and NP are closely related to individuals’ behaviors as a consumer. Understanding the factors that influence consumer purchase decision processes is of crucial importance to managers and researchers alike. The paper is of great value for firms that consider enhance BL.


2018 ◽  
Vol 29 (3) ◽  
pp. 608-628 ◽  
Author(s):  
Gensheng (Jason) Liu ◽  
Weiyong Zhang ◽  
Chundong Guo

PurposeEffective mass customization (MC) depends on accurately identifying customer needs and procuring appropriate components from supply base to manufacture the required product configurations in a timely manner. In essence, effective MC for a focal firm is contingent on effective supply chain management. However, extant literature is not very clear on how supply chain (SC) planning and integration activities affect MC. The purpose of this paper is to fill the gap by examining the impacts of SC-planning and SC-integration on MC.Design/methodology/approachOrganizational information processing theory is used to link SC-integration with MC ability, and a link is hypothesized between SC-planning and SC-integration. The structural equation model is then analyzed using data from 262 manufacturing plants.FindingsIt is found that SC-integration fully mediates the relationship between SC-planning and MC-ability.Research limitations/implicationsThe SC-integration measure is from a focal manufacturer’s standpoint, rather than the standpoint of the entire SC.Practical implicationsThe results indicate that using a SC perspective in planning activities helps a focal firm integrate with key stakeholders along the SC, which subsequently helps the firm mass customize. Practitioners should recognize the added importance of SC-planning and SC-integration if they want to mass customize.Originality/valueThis study provides a theoretical foundation for the relationship between SC-integration and MC. It also provides a more comprehensive conceptualization of SC-integration, which includes supplier integration, customer integration, as well as internal functional integration which was neglected in many previous studies.


2019 ◽  
Vol 119 (8) ◽  
pp. 1785-1801 ◽  
Author(s):  
Bo Yan ◽  
Yan-Ru Chen ◽  
Xiao-Tai Zhou ◽  
Jing Fang

Purpose The purpose of this paper is to analyze how social networking services (SNSs) affect consumers’ behaviors on the omni-channel supply chain by using a reverse research method. Design/methodology/approach Initially, a questionnaire was administered to obtain data on the relationship between the perception factors of channels and consumer behavior. Subsequently, a structural equation model was constructed, and consumer behavior were determined in the omni-channel supply chain. Finally, the importance of various factors that affected consumer behavior in the omni-channel supply chain under SNSs was determined. Findings Conclusions affirm that a positive effect on consumer channel behaviors occurs when buyers obtain information from social network platforms. However, regardless of online, offline, or mobile terminal, shortcomings are indicated in consumers’ lack of feedback on purchased goods and the bias of feedback. Originality/value The study explored ways to efficiently apply SNSs in building the omni-channel supply chain. Meanwhile, corresponding suggestions were provided such that companies will know about consumer needs.


2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Makjen Sinaga ◽  
Suharyono Suharyono ◽  
Muhammad Al Musadieq ◽  
Mohammad Iqbal

PurposeThis study aims to test and analyze the effect of maintenance operation, time utility and occupancy on sustainability with transit oriented development (TOD) as a moderating variable.Design/methodology/approachThis research is a quantitative research. The data in this study are a combination of primary data obtained through a questionnaire. The research took place at PT MRT Jakarta with all the board of directors as a sample in this study. The sampling technique used is saturated sampling and data analysis using structural equation model (SEM).FindingsThe result shows that maintenance and operation (M&O) have a positive and significant effect on time utility, M&O have a positive and significant effect on sustainability, time utility has a positive and significant effect on occupancy, occupancy has a positive and significant effect on sustainability and the influence of TOD does not significantly influence the relationship between time utility on occupancy and occupancy on sustainability.Originality/valueThe originality of this research lies in testing the maintenance operation, time utility and occupancy variables on sustainability with the renewal of TOD as a moderating variable.


2019 ◽  
Vol 32 (1) ◽  
pp. 1-22 ◽  
Author(s):  
Matthew Tingchi Liu ◽  
Yongdan Liu ◽  
Ziying Mo ◽  
Zhidong Zhao ◽  
Zhenghao Zhu

Purpose The purpose of this paper is to focus on how corporate social responsibility (CSR) (i.e. responsibility to customers, employees and society) influences customer behavioural loyalty in the hotel industry. The mediating effects of brand image and customer trust on the relationship between CSR and customer behavioural loyalty are also considered. Design/methodology/approach In total, 298 valid responses to questionnaire surveys were collected from a convenience sample in China in 2017. A structural equation model was used to test the hypotheses. Findings Hotel customer behavioural loyalty can be enhanced by CSR performance. Performance in each of the three CSR domains positively impacted customer behavioural loyalty to different degrees. The impact of CSR on the customer had the strongest influence on Chinese customers’ behavioural loyalty among the three CSR domains of customer, employee and society. Brand image and customer trust were found to be mediators of the relationship between CSR performance and customer behavioural loyalty. Originality/value The current research contributes to the literature by demonstrating that CSR activities are not all equally effective. Results reveal that the society dimension of CSR had the strongest impact on Chinese customers’ brand image of hotels among the three CSR dimensions investigated. In terms of Chinese hotel customers’ trust, the CSR–customer dimension plays the most effective role. The findings also support the notion that Chinese consumers are beginning to use CSR information to evaluate hotels.


2017 ◽  
Vol 22 (3) ◽  
pp. 252-268 ◽  
Author(s):  
Ernest Kissi ◽  
Theophilus Adjei-Kumi ◽  
Edward Badu ◽  
Emmanuel Bannor Boateng

Purpose Tender price remains an imperative parameter for clients in deciding whether to invest in a construction project, and it serves as a basis for tender price index (TPI) manipulations. This paper aims to examine the factors affecting tender price in the construction industry. Design/methodology/approach Based on the literature review, nine independent constructs and one dependent construct relating to tender pricing were identified. A structured questionnaire survey was conducted among quantity surveyors in Ghana. Partial least squares structural equation modelling (PLS-SEM) examined the influences of various constructs on tender price development (TPD) and the relationships among TPD and TPI. Findings Results showed that cultural attributes, client attributes, contractor attributes; contract procedures and procurement methods; consultant and design team; external factors and market conditions; project attributes; sustainable and technological attributes; and TPI have a positive influence on tender price, whereas fraudulent attributes exert a negative influence. Practical implications The findings offer construction professionals broader understanding of factors that affect tender pricing. The results may be used in professional decision-making in the pricing of construction projects, as they offer clearer causal relations between how each construct will influence pricing. Originality/value This study adds to the body of construction pricing knowledge by establishing the relationships and degree of influences of various factors on tender price. These findings provide a valuable reference for practitioners.


2015 ◽  
Vol 27 (5) ◽  
pp. 503-518 ◽  
Author(s):  
Changiz Valmohammadi ◽  
Mohsen Kalantari

Purpose – The purpose of this paper is threefold, first to investigate if ISO 9001 certified companies in an Iranian province (Kermanshah) perform better than non-certified ISO 9001. Second, what is the main motivation of the manufacturing companies of Kermanshah province on obtaining ISO 9001 certification, i.e., internal or external motivations. And finally, if ISO 9001 certified companies with high scores of internal motivations, show better levels of performance in comparison with certified companies obtaining low scores of internal motivations. Design/methodology/approach – A survey questionnaire was distributed to the 350 companies with ISO 9000 certification, and a total of 287 usable responses were returned. Using a structural equation model, this study empirically examines the relationship between ISO 9000 implementation and firm performance, and the moderating role of firm motivation on organizational performance. Findings – The results demonstrate that ISO 9001 certified companies show better organizational performance than non-certified ISO 9001 companies and internal motivations play more important role on obtaining ISO 9001 certificate than external motivations. Also ISO 9001 certified companies with high scores of internal motivations show better levels of performance than those ISO 9001 certified companies with low scores of internal motivations. Research limitations/implications – The sample is restricted to only a single region and manufacturing, so it would be strongly recommended that data be gathered from various parts of Iran including both manufacturing and service industries. As in this study the data gathered were cross-sectional, it is recommended in order to gain deeper understanding of the cause-and-effect relationship among the variables data to be gathered longitudinally. Originality/value – This study represents a first attempt to construct a conceptual framework that integrates the motivations behind implementing ISO 9000 certification, and ISO 9000 performance in the context of Iran and gives a particular focus on the Iran manufacturing companies.


2017 ◽  
Vol 3 (4) ◽  
pp. 324-338 ◽  
Author(s):  
Francisco Antonio dos Anjos ◽  
Melise de Lima Pereira ◽  
Florença Fiedler Pichler Von Tennenberg

Purpose In order to offer a theoretical and empirical contribution to the theme, the purpose of this paper is to assess the tourist image of the destination Balneário Camboriú, Santa Catarina, Brazil, from the tourists’ perspective. The authors specify the latent dimensions involved in the formation of the cognitive, affective, and conative image of coastal tourism destination, through which the authors can analyze and measure the construct. Design/methodology/approach The research is exploratory, descriptive, and predominantly quantitative. It uses non-probability convenience sampling, consisting of a sample of 425 tourists. Data collection were conducted in the studied destination during the summer season – 2015/2016. Findings Through exploratory and confirmatory factor analysis, the authors identified and tested the factors that comprise the image. Structural equation model evaluated the relationship that theoretically exists between the components of the image and the weight of the various components (cognitive, affective, and conative) on the overall image of the destination. Originality/value This research contributes theoretically and empirically to the discussions on the components of the destination image, in as much as it analyzes and interprets the cognitive, affective, and conative components of the image of the tourism destination Balneário Camboriú, Santa Catarina, Brazil.


Sign in / Sign up

Export Citation Format

Share Document