Numerical study of thermal radiation and suction effects on copper and silver water nanofluids past a vertical Riga plate

2019 ◽  
Vol 15 (4) ◽  
pp. 714-736 ◽  
Author(s):  
Sawan Kumar Rawat ◽  
Ashish Mishra ◽  
Manoj Kumar
Keyword(s):  
Thermal Radiation ◽  
Skin Friction ◽  
Chemical Reaction ◽  
Volume Fraction ◽  
Numerical Study ◽  
Flow Characteristics ◽  
Skin Friction Coefficient ◽  
Content Type ◽  
Similarity Transformations ◽  
Riga Plate

Purpose The purpose of this paper is to explore the flow of Cu-water and Ag-water nanofluids past a vertical Riga plate. The plate is infinite in height and has zero normal wall flux through its surface. Influence of thermal radiation, slip, suction and chemical reaction on the flow characteristics are reported. Design/methodology/approach Non-dimensional forms of the flow governing equations are obtained by means of a set of similarity transformations. Numerical solution is obtained with the help of fourth-fifth-order Runge–Kutta–Fehlberg method with shooting procedure. Comparison of solution profiles of Cu-water and Ag-water nanofluids are presented graphically and with the help of tables. Influence of pertinent parameters on skin friction and heat transfer rate is also reported. Findings Results reveal that the skin friction coefficient is more prominent in the case of Ag-water nanofluid for an increase in thermal radiation and volume fraction. The role of suction and slip is to increase velocity but decrease the temperature in both nanofluids. Temperature and velocity of both nanofluids increase as volume fraction and thermal radiation values are augmented. Heat transport increases with thermal radiation. Region near the plate experiences rise in nanoparticle concentration with an increase in chemical reaction parameter. Originality/value A complete investigation of the modeled problem is addressed and the results of this paper are original.

EMHD time-dependant tangent hyperbolic nanofluid flow by a convective heated Riga plate with chemical reaction

2018 ◽  
Vol 233 (4) ◽  
pp. 776-786 ◽  
Author(s):  
A Mahdy ◽  
GA Hoshoudy
Keyword(s):  
Boundary Condition ◽  
Brownian Motion ◽  
Skin Friction ◽  
Chemical Reaction ◽  
Slip Boundary Condition ◽  
Negative Influence ◽  
Skin Friction Coefficient ◽  
Physical Parameters ◽  
Riga Plate ◽  
Linear Differential

The present exploration addresses the boundary layer electro-magnetohydrodynamic (EMHD) flow of time-dependant non-Newtonian tangent hyperbolic nanofluid that is electrically conducting past a Riga surface with variable thickness and slip boundary condition. Configuration flow modeling is deduced considering chemical reaction and heat generation/absorption with the impacts of Brownian motion and thermophoresis. Also a newly proposed boundary condition with zero mass flux has been presented in the current contribution. Numerical solution of the governing non-linear differential equations is presented by considering the shooting technique. Graphical illustrations pointing out the aspects of distinct physical parameters on the non-Newtonian nanofluid velocity, temperature and concentration fields are introduced. From the computational results, the concentration distribution gives a decreasing function of the chemical reaction and Brownian motion parameters. Higher values of shape parameter yield a negative influence on the mechanical properties of the surface. The Hartmann number leads to maximize both of velocity field and skin friction coefficient. Additionally, numerical computed values of the skin friction, local Nusselt and Sherwood numbers are depicted with the needful discussion.

scholarly journals Micropolar ferrofluid flow via natural convective about a radiative isoflux sphere

2021 ◽  
Vol 13 (2) ◽  
pp. 168781402199439
Author(s):  
Saber EL-Kabeir ◽  
Ahmed Rashad ◽  
Waqar Khan ◽  
Zeinab Mahmoud Abdelrahman
Keyword(s):  
Nusselt Number ◽  
Friction Coefficient ◽  
Thermal Radiation ◽  
Skin Friction ◽  
Magnetic Force ◽  
Volume Fraction ◽  
Skin Friction Coefficient ◽  
Temperature Fields ◽  
Partial Slip ◽  
Convection Flow

Current investigation scrutinizes the magnetohydrodynamic (MHD) natural convection flow of micropolar ferrofluid across an isoflux sphere with the impacts of thermal radiation and partial slip. Cobalt-nanoparticles with kerosene as the base fluid are considered. The governing partial differential conservation equations and convenient boundary conditions are rendered into a nondimensional form. The finite difference method (FDM) is then applied to determine the solution of a collection of resultant equations. The outcomes obtained by FDM have also compared with cited investigation. Illustrations describing influences of prominent parameters which provides physical interpretations of velocity, angular velocity, and temperature fields as well as the skin friction coefficient and Nusselt number are examined in detail with the help of graphical representations. This investigation determined that the skin-friction coefficient and heat transport rate reduced along with augmentation in the magnetic force and micropolar parameter, while opposite performance is adhered with elevating in the thermal radiation. Moreover, the boosted nanoparticle volume fraction reduced the skin friction coefficient and improved the Nusselt number.

Scrutinization of Chemical Reaction Effect on Flow and Mass Transfer of Prandtl Liquid over a Riga Plate in the Presence of Solutal Slip Effect

2018 ◽  
Vol 16 (8) ◽  
Author(s):  
B.J. Gireesha ◽  
K. Ganesh Kumar ◽  
B.C. Prasannakumar
Keyword(s):  
Boundary Layer ◽  
Mass Transfer ◽  
Differential Equations ◽  
Layer Thickness ◽  
Chemical Reaction ◽  
Boundary Layer Thickness ◽  
Skin Friction Coefficient ◽  
Linear Ordinary Differential Equations ◽  
Similarity Transformations ◽  
Riga Plate

AbstractIn the present paper focused on flow and mass transfer of Prandtl fluid over a Riga plate. The effects of chemical reaction and solutal slip are taken into the account. The governing partial differential equations are reduced into a set of coupled non linear ordinary differential equations using suitable similarity transformations. These equations are then solved using Runge-Kutta-Fehlberg-45 method. Behaviour of emerging parameters are presented graphically and discussed for velocity and concentration distribution. Numerical values of reduced skin friction coefficient and Sherwood number are shown in table and are discussed. From the plotted results it can be observed that the solutal boundary layer thickness decreases for larger values of chemical reaction parameter and Schmidt number. Also, momentum boundary layer thickness rise with stronger modified Hartman number.

Homotopy analysis method for unsteady mixed convective stagnation-point flow of a nanofluid using Tiwari-Das nanofluid model

2016 ◽  
Vol 26 (1) ◽  
pp. 40-62 ◽  
Author(s):  
Saeed Dinarvand ◽  
Reza Hosseini ◽  
Ioan Pop
Keyword(s):  
Nusselt Number ◽  
Friction Coefficient ◽  
Mixed Convection ◽  
Skin Friction ◽  
Local Nusselt Number ◽  
Magnetic Parameter ◽  
Volume Fraction ◽  
Skin Friction Coefficient ◽  
Nanoparticle Volume Fraction ◽  
Content Type

Purpose – The current study is mainly motivated by the need to the development of the transient MHD mixed convection stagnation-point flow and heat transfer of an electrically conducting nanofluid over a vertical permeable stretching/shrinking sheet by means of Tiwari-Das nanofluid model. The purpose of this paper is to investigate the effects of the parameters governing the flow i.e. the nanoparticle volume fraction, the unsteadiness parameter, the magnetic parameter, the wall transpiration parameter, the mixed convection parameter and the velocity ratio parameter on dimensionless velocity and temperature distributions, skin friction coefficient and local Nusselt number. Design/methodology/approach – The mathematical model has been formulated based on Tiwari-Das nanofluid model. Three different types of water-based nanofluid with copper, aluminum oxide (alumina) and titanium dioxide (titania) as nanoparticles are considered in this investigation. Using appropriate similarity variables, the governing equations are transformed into nonlinear ordinary differential equations in the dimensionless stream function, which is solved analytically by the well-know homotopy analysis method. The present simulations agree closely with the previous studies in the especial cases. Findings – The results show that by increasing the nanoparticle volume fraction, the unsteadiness parameter, the magnetic parameter, the wall transpiration parameter, the mixed convection parameter or reducing the velocity ratio parameter, the skin friction coefficient enhances. Furthermore, the local Nusselt number enhances with different rates by increasing the nanoparticle volume fraction, the unsteadiness parameter, the magnetic parameter, the wall transpiration parameter, the mixed convection parameter and the velocity ratio parameter. Besides, the skin friction coefficient and the local Nusselt number are highest for copper-water nanofluid compared to the alumina-water and titania-water nanofluids. Originality/value – Tiwari-Das nanofluid model has not been applied for the flow with these characteristics as mentioned in the paper. A comprehensive survey on boundary layer behavior has been presented. There are few studies regarding as analysis on thermal and hydrodynamics boundary layer. All plots presented in the paper are new and did not report in any other study. The effects of the parameters governing the flow on skin friction coefficient and local Nusselt number have been illustrated in the paper while there are some conflicts with previous published article that have been interpreted in details in the paper.

Heat Transfer Enhancement of Magneto-Micropolar Nanofluid Over a Wedge

2020 ◽  
Vol 9 (3) ◽  
pp. 168-176
Author(s):  
E. R. EL-Zahar ◽  
M. A. Mansour ◽  
A. M. Rashad ◽  
Z. M. A. Abdelrahman ◽  
A. M. A. EL-Hakiem
Keyword(s):  
Nusselt Number ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Magnetic Force ◽  
Volume Fraction ◽  
Skin Friction Coefficient ◽  
Alumina Nanoparticles ◽  
Similarity Transformations ◽  
Micropolar Nanofluid ◽  
Linear Odes

Current investigation characterizes the flow and heat transmission of magneto-micropolar nanofluid through a non-isothermal wedge. The base-fluid as water and micropolar nanofluid as Copper or Alumina-nanoparticles are considered. Applying the similarity transformations along with non-dimensional quantities the formulated equations of the investigation are transmuted into a system of non-linear ODEs with a collection of convenient boundary conditions. The fourth-order finite difference method (FFDM) is then applied to determine the solution of a collection of resultant equations. The outcomes obtained by FFDM have also compared with cited works. Illustrations describing influences of prominent parameters which provide physical interpretations of temperature, micro rotation and velocity fields are examined in detail with the help of graphical representations. Both the skin friction coefficient and Nusselt number are computed and exhibited through tabular forms. This investigation determined that the skin-friction coefficient and heat transport rate improved along with augmentation in the magnetic force. micropolar parameter and the nanoparticle volume fraction augmented the Both skin friction coefficient and Nusselt number.

Dissipative effects on a chemically and thermally radiative heat fluid flow past a shrinking porous sheet

2020 ◽  
pp. 1-14
Author(s):  
A. Shahid ◽  
M. Ali Abbas ◽  
H.L. Huang ◽  
S.R. Mishra ◽  
M.M. Bhatti
Keyword(s):  
Fluid Flow ◽  
Differential Equations ◽  
Thermal Radiation ◽  
Chemical Reaction ◽  
Linearization Method ◽  
Surface Drag ◽  
Suction Parameter ◽  
Similarity Transformations ◽  
Dissipative Effects ◽  
Successive Linearization Method

The present study analyses the dissipative influence into an unsteady electrically conducting fluid flow embedded in a pervious medium over a shrinkable sheet. The behavior of thermal radiation and chemical reactions are also contemplated. The governing partial differential equations are reformed to ordinary differential equations by operating similarity transformations. The numerical outcomes for the arising non-linear boundary value problem are determined by implementing the Successive linearization method (SLM) via Matlab software. The velocity, temperature, and concentration magnitudes for distant values of the governing parametric quantities are conferred, and their conduct is debated via graphical curves. The surface drag coefficient increases, whereas the local Nusselt number and Sherwood number decreases for enhancing unsteadiness parameter across suction parameter. Moreover, the magnetic and suction parameters accelerate velocity magnitudes while by raising porosity parameter, velocity decelerates. Larger numeric of thermal radiation parameter and Eckert number accelerates the temperature profile while by enhancing Prandtl number it decelerates. Schmidt number and chemical reaction parameters slowdowns the concentration distribution, and the chemical reaction parameter influences on the point of chemical reaction that benefits the interface mass transfer. It is expected that the current achieved results will furnish fruitful knowledge in industrious utilities.

Impact of viscosity variation on oblique flow of Cu–H2O nanofluid

2017 ◽  
Vol 232 (5) ◽  
pp. 622-631 ◽  
Author(s):  
R Tabassum ◽  
Rashid Mehmood ◽  
O Pourmehran ◽  
NS Akbar ◽  
M Gorji-Bandpy
Keyword(s):  
Heat Flux ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Volume Fraction ◽  
Variable Viscosity ◽  
Solid Volume Fraction ◽  
Local Heat ◽  
Skin Friction Coefficient ◽  
Viscosity Parameter ◽  
Local Heat Flux

The dynamic properties of nanofluids have made them an area of intense research during the past few decades. In this article, flow of nonaligned stagnation point nanofluid is investigated. Copper–water based nanofluid in the presence of temperature-dependent viscosity is taken into account. The governing nonlinear coupled ordinary differential equations transformed by partial differential equations are solved numerically by using fourth-order Runge–Kutta–Fehlberg integration technique. Effects of variable viscosity parameter on velocity and temperature profiles of pure fluid and copper–water nanofluid are analyzed, discussed, and presented graphically. Streamlines, skin friction coefficients, and local heat flux of nanofluid under the impact of variable viscosity parameter, stretching ratio, and solid volume fraction of nanoparticles are also displayed and discussed. It is observed that an increase in solid volume fraction of nanoparticles enhances the magnitude of normal skin friction coefficient, tangential skin friction coefficient, and local heat flux. Viscosity parameter is found to have decreasing effect on normal and tangential skin friction coefficients whereas it has a positive influence on local heat flux.

Nanofluid flow past an impulsively started vertical plate with variable surface temperature

2016 ◽  
Vol 26 (1) ◽  
pp. 328-347 ◽  
Author(s):  
Rajesh Vemula ◽  
A J Chamkha ◽  
Mallesh M. P.
Keyword(s):  
Nusselt Number ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Vertical Plate ◽  
Aluminium Oxide ◽  
Skin Friction Coefficient ◽  
Viscous Drag ◽  
Content Type ◽  
Variable Surface ◽  
Variable Surface Temperature

Purpose – The purpose of this paper is to focus on the numerical modelling of transient natural convection flow of an incompressible viscous nanofluid past an impulsively started semi-infinite vertical plate with variable surface temperature. Design/methodology/approach – The problem is governed by the coupled non-linear partial differential equations with appropriate boundary conditions. A robust, well-tested, Crank-Nicolson type of implicit finite-difference method, which is unconditionally stable and convergent, is used to solve the governing non-linear set of partial differential equations. Findings – The local and average values of the skin-friction coefficient (viscous drag) and the average Nusselt number (the rate of heat transfer) decreased, while the local Nusselt number increased for all nanofluids, namely, aluminium oxide-water, copper-water, titanium oxide-water and silver-water with an increase in the temperature exponent m. Selecting aluminium oxide as the dispersing nanoparticles leads to the maximum average Nusselt number (the rate of heat transfer), while choosing silver as the dispersing nanoparticles leads to the minimum local Nusselt number compared to the other nanofluids for all values of the temperature exponent m. Also, choosing silver as the dispersing nanoparticles leads to the minimum skin-friction coefficient (viscous drag), while selecting aluminium oxide as the dispersing nanoparticles leads to the maximum skin-friction coefficient (viscous drag) for all values of the temperature exponent m. Research limitations/implications – The Brinkman model for dynamic viscosity and Maxwell-Garnett model for thermal conductivity are employed. The governing boundary layer equations are written according to The Tiwari-Das nanofluid model. A range of nanofluids containing nanoparticles of aluminium oxide, copper, titanium oxide and silver with nanoparticle volume fraction range less than or equal to 0.04 are considered. Practical implications – The present simulations are relevant to nanomaterials thermal flow processing in the chemical engineering and metallurgy industries. This study also provides an important benchmark for further simulations of nanofluid dynamic transport phenomena of relevance to materials processing, with alternative computational algorithms (e.g. finite element methods). Originality/value – This paper is relatively original and illustrates the influence of variable surface temperature on transient natural convection flow of a viscous incompressible nanofluid and heat transfer from an impulsively started semi-infinite vertical plate.

Stagnation point flow of a second-grade hybrid nanofluid induced by a Riga plate

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Najiyah Safwa Khashi'ie ◽  
Iskandar Waini ◽  
Syazwani Mohd Zokri ◽  
Abdul Rahman Mohd Kasim ◽  
Norihan Md Arifin ◽  
...  
Keyword(s):  
Transfer Rate ◽  
Skin Friction Coefficient ◽  
Working Fluid ◽  
Second Grade ◽  
Hybrid Nanofluid ◽  
Second Grade Fluid ◽  
Content Type ◽  
Thermal Enhancement ◽  
Riga Plate ◽  
Grade Fluid

Purpose This paper aims to accentuate the behavior of second-grade hybrid Al2O3–Cu nanofluid flow and its thermal characteristics driven by a stretching/shrinking Riga plate. Design/methodology/approach The second-grade fluid is considered with the combination of Cu and Al2O3 nanoparticles. Three base fluids namely water, ethylene glycol (EG) and methanol with different Prandtl number are also examined. The formulation of the mathematical model of second-grade hybrid nanofluid complies with the boundary layer approximations. The complexity of the governing model is reduced into a simpler differential equations using the similarity transformation. The bvp4c solver is fully used to solve the reduced equations. The observation of multiple solutions is conducted for the assisting (stretching) and opposing (shrinking) cases. Findings The impact of suction parameter, second-grade parameter, electromagnetohydrodynamics (EMHD) parameter, velocity ratio parameter and the volumetric concentration of the alumina and copper nanoparticles are numerically analyzed on the velocity and temperature profiles, skin friction coefficient and local Nusselt number (thermal rate) of the second-grade Al2O3–Cu/water. The solution is unique when (static and stretching cases) while dual for a specific range of negative in the presence of suction effect. Based on the appearance of the first solution in all cases of, it is physically showed that the first solution is stable. Further examination reveals that the EMHD and suction parameters are the contributing factors for the thermal enhancement of this non-Newtonian working fluid. Meanwhile, the viscosity of the non-Newtonian fluid also plays a significant role in the fluid motion and heat transfer rate based on the finding that the EG base fluid produces the maximum heat transfer rate but the lowest critical value and skin friction coefficient. Originality/value The results are novel and contribute to the discovery of the hybrid nanoparticles’ performance in the non-Newtonian second-grade fluid. Besides, this study is beneficial to the researchers in this field and general audience from industries regarding the factors, which contributing to the thermal enhancement of the working fluid.

Soret, Dufour and radiation effects of a viscoelastic fluid on an exponentially stretching surface using the Catteneo–Christov heat flux model

2020 ◽  
Vol 16 (6) ◽  
pp. 1577-1594
Author(s):  
Kazeem Babawale Kasali ◽  
Yusuf Olatunji Tijani ◽  
Matthew Oluwafemi Lawal ◽  
Yussuff Titilope Lawal
Keyword(s):  
Thermal Radiation ◽  
Chemical Reaction ◽  
Viscoelastic Fluid ◽  
Radiation Effects ◽  
Stretching Sheet ◽  
Content Type ◽  
Analytical Technique ◽  
Cross Diffusion ◽  
Exponentially Stretching Sheet ◽  
Exponentially Stretching

PurposeIn this paper, we studied the steady flow of a radiative magnetohydrodynamics viscoelastic fluid over an exponentially stretching sheet. This present work incorporated the effects of Soret, Dufour, thermal radiation and chemical reaction.Design/methodology/approachAn appropriate semi-analytical technique called homotopy analysis method (HAM) was used to solve the resulting nonlinear dimensionless boundary value problem, and the method was validated numerically using a finite difference scheme implemented on Maple software.FindingsIt was observed that apart from excellence agreement with the results in literature, the results obtained gave further insights into the behaviour of the system.Originality/valueThe purpose of this research is to investigate heat and mass transfer profiles of a MHD viscoelastic fluid flow over an exponentially stretching sheet in the influence of chemical reaction, thermal radiation and cross-diffusion which are hitherto neglected in previous studies.

Sign in / Sign up

Export Citation Format

Share Document