ElectroLab: Electronic Laboratory System

2015 ◽  
Author(s):  
Sahar A. El Rahman
Keyword(s):  
Laboratory System

The effects of surcharged manholes on the travel time and dispersion of solutes in sewer systems

1995 ◽  
Vol 31 (7) ◽  
pp. 51-59 ◽  
Author(s):  
Ian Guymer ◽  
Rob O'Brien
Keyword(s):  
Travel Time ◽  
Moment Method ◽  
In Situ Measurements ◽  
Time Change ◽  
Longitudinal Dispersion ◽  
Laboratory System ◽  
Environmental Load ◽  
Hydraulic Characteristics ◽  
Sewer Systems

Previously, the design of sewer systems has been limited to studies of their hydraulic characteristics, in particular the ability of the system to convey the maximum discharge. Greater environmental awareness has necessitated that new designs, and some existing schemes, are assessed to determine the environmental load which the scheme will deliver to any downstream component. This paper describes a laboratory programme which has been designed to elucidate the effects of manholes on the longitudinal dispersion of solutes. A laboratory system is described, which allows in situ measurements to be taken of the concentration of a fluorescent solute tracer, both up- and down-stream of a surcharged manhole junction. Results are presented from a preliminary series of studies undertaken for a single manhole geometry over a range of discharges, with varying levels of surcharge. Results are presented showing the variation of travel time, change in second moment of the distribution and of a dispersion factor with surcharge, assuming a Taylor approach and determining the dispersion factor using a ‘change in moment’ method. The effect of the stored volume within the manhole is clearly evident. The limitations and the applicability of this approach are discussed.

scholarly journals Thymoma in an aged backyard Leghorn chicken, with reviews of a database and literature

2021 ◽  
Vol 33 (2) ◽  
pp. 336-339
Author(s):  
Julia Blakey ◽  
Carmen Jerry ◽  
Ana da Silva ◽  
Simone Stoute
Keyword(s):  
Soft Tissue Mass ◽  
Animal Health ◽  
Postmortem Examination ◽  
Cervical Region ◽  
Laboratory System ◽  
Unexpected Death ◽  
Tissue Mass ◽  
Microscopic Features ◽  
History Of ◽  
Backyard Chickens

A 7-y-old backyard Leghorn chicken ( Gallus domesticus) was submitted to the California Animal Health and Food Safety Laboratory System (CAHFS)–Turlock branch for postmortem examination, with a history of unexpected death. At postmortem examination, a hemorrhagic soft tissue mass was observed in the cervical region. Microscopically, a densely cellular neoplasm of polygonal epithelial cells and small lymphocytes was observed. The microscopic features of the neoplasm in combination with positive immunohistochemistry for pancytokeratin and CD3 were used to classify the lesion as a thymoma. Thymoma was diagnosed in only 5 birds submitted to CAHFS from 1990 to 2019. Thymoma has been described only rarely in birds, and is an unusual diagnosis in backyard chickens.

scholarly journals Origins and Development of the National Laboratory System for Public Health Testing

2010 ◽  
Vol 125 (2_suppl) ◽  
pp. 18-30 ◽  
Author(s):  
J. Rex Astles ◽  
Vanessa A. White ◽  
Laurina O. Williams
Keyword(s):  
Public Health ◽  
National Laboratory ◽  
Laboratory System

scholarly journals Exploring country-wide equitable government health care facility access in Uganda

2021 ◽  
Vol 20 (1) ◽  
Author(s):  
Nicholas Dowhaniuk
Keyword(s):  
Health Care ◽  
Random Forest ◽  
Health Center ◽  
Travel Time ◽  
Health Centers ◽  
Sub Saharan Africa ◽  
Walking Distance ◽  
Laboratory System ◽  
Government Health ◽  
Sub Saharan

Abstract Background Rural access to health care remains a challenge in Sub-Saharan Africa due to urban bias, social determinants of health, and transportation-related barriers. Health systems in Sub-Saharan Africa often lack equity, leaving disproportionately less health center access for the poorest residents with the highest health care needs. Lack of health care equity in Sub-Saharan Africa has become of increasing concern as countries enter a period of simultaneous high infectious and non-communicable disease burdens, the second of which requires a robust primary care network due to a long continuum of care. Bicycle ownership has been proposed and promoted as one tool to reduce travel-related barriers to health-services among the poor. Methods An accessibility analysis was conducted to identify the proportion of Ugandans within one-hour travel time to government health centers using walking, bicycling, and driving scenarios. Statistically significant clusters of high and low travel time to health centers were calculated using spatial statistics. Random Forest analysis was used to explore the relationship between poverty, population density, health center access in minutes, and time saved in travel to health centers using a bicycle instead of walking. Linear Mixed-Effects Models were then used to validate the performance of the random forest models. Results The percentage of Ugandans within a one-hour walking distance of the nearest health center II is 71.73%, increasing to 90.57% through bicycles. Bicycles increased one-hour access to the nearest health center III from 53.05 to 80.57%, increasing access to the tiered integrated national laboratory system by 27.52 percentage points. Significant clusters of low health center access were associated with areas of high poverty and urbanicity. A strong direct relationship between travel time to health center and poverty exists at all health center levels. Strong disparities between urban and rural populations exist, with rural poor residents facing disproportionately long travel time to health center compared to wealthier urban residents. Conclusions The results of this study highlight how the most vulnerable Ugandans, who are the least likely to afford transportation, experience the highest prohibitive travel distances to health centers. Bicycles appear to be a “pro-poor” tool to increase health access equity.

scholarly journals Geothermal Boreholes in Poland—Overview of the Current State of Knowledge

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3251
Author(s):  
Tomasz Sliwa ◽  
Aneta Sapińska-Śliwa ◽  
Andrzej Gonet ◽  
Tomasz Kowalski ◽  
Anna Sojczyńska
Keyword(s):  
Heat Exchangers ◽  
Oil And Gas ◽  
Produced Water ◽  
Geothermal Water ◽  
Laboratory System ◽  
Water Production ◽  
Injection Wells ◽  
Geological Conditions ◽  
Geothermal Wells ◽  
Borehole Heat Exchangers

Geothermal energy can be useful after extraction from geothermal wells, borehole heat exchangers and/or natural sources. Types of geothermal boreholes are geothermal wells (for geothermal water production and injection) and borehole heat exchangers (for heat exchange with the ground without mass transfer). The purpose of geothermal production wells is to harvest the geothermal water present in the aquifer. They often involve a pumping chamber. Geothermal injection wells are used for injecting back the produced geothermal water into the aquifer, having harvested the energy contained within. The paper presents the parameters of geothermal boreholes in Poland (geothermal wells and borehole heat exchangers). The definitions of geothermal boreholes, geothermal wells and borehole heat exchangers were ordered. The dates of construction, depth, purposes, spatial orientation, materials used in the construction of geothermal boreholes for casing pipes, method of water production and type of closure for the boreholes are presented. Additionally, production boreholes are presented along with their efficiency and the temperature of produced water measured at the head. Borehole heat exchangers of different designs are presented in the paper. Only 19 boreholes were created at the Laboratory of Geoenergetics at the Faculty of Drilling, Oil and Gas, AGH University of Science and Technology in Krakow; however, it is a globally unique collection of borehole heat exchangers, each of which has a different design for identical geological conditions: heat exchanger pipe configuration, seal/filling and shank spacing are variable. Using these boreholes, the operating parameters for different designs are tested. The laboratory system is also used to provide heat and cold for two university buildings. Two coefficients, which separately characterize geothermal boreholes (wells and borehole heat exchangers) are described in the paper.

scholarly journals Non-isolated load sharing direct current system operation with use of the auctioneering diodes

2019 ◽  
Vol 28 ◽  
pp. 01037 ◽  
Author(s):  
Maciej Kozak
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Heat Dissipation ◽  
Current System ◽  
Electrical Power ◽  
Experimental System ◽  
Laboratory System ◽  
Simulation Studies ◽  
Power Distribution System ◽  
Electrical Systems

The paper presents the background and results of numerical simulation and experimental research of a system using auctioneering diodes used to distribute the electrical power between two power converters connected with intermediate circuits in parallel, direct connection. Presented non-isolated power distribution system which utilizes blocking diodes placed in DC branches are used in the selected ship's electrical systems, however, they create problems related to control and handling ground faults. Another issue occurring during the operation of this type of systems is increased heat dissipation while diodes switching. Selected problems related to the operation of experimental system have been identified by means of simulation studies and experiments carried out in a 11 kVA laboratory system and the theoretical basis along with results are provided in the article.

Laboratory system for the evaluation of helmet-mounted displays

2004 ◽  
Author(s):  
Howard H. Beasley ◽  
Thomas H. Harding ◽  
John S. Martin ◽  
Clarence E. Rash
Keyword(s):  
Laboratory System

Angle calculations for a three-circle goniostat

2006 ◽  
Vol 39 (2) ◽  
pp. 151-157 ◽  
Author(s):  
Gunnar Thorkildsen ◽  
Helge B. Larsen ◽  
Jon Are Beukes
Keyword(s):  
General Procedure ◽  
Reciprocal Lattice ◽  
Reciprocal Lattice Vector ◽  
Laboratory System ◽  
Lattice Vector ◽  
New Approach ◽  
Rotation Matrices ◽  
Rotation Axes ◽  
Vector Description

A general procedure for angle calculations for a three-circle goniostat has been developed. This new approach is based on a vector description of the transformation of a reciprocal-lattice vector under the action of a rotation shaft. It does not invoke the use of rotation matrices and applies equally well to cases where the directions of the rotation axes do not conform with coordinate axes of the laboratory system adopted for the analysis.

Sign in / Sign up

Export Citation Format

Share Document