A real-time smart sensor system for visual motion estimation

Author(s):  
T. Rowekamp ◽  
L. Peters
Author(s):  
Ahmed Nabil Belbachir ◽  
Martin Litzenberger ◽  
Christoph Posch ◽  
Peter Schon
Keyword(s):  

2021 ◽  
pp. 155335062110314
Author(s):  
Mario V. Roser ◽  
Alexander H. R. Frank ◽  
Lea Henrichs ◽  
Christian Heiliger ◽  
Dorian Andrade ◽  
...  

Background: For centuries, surgeons have relied on surgical drains during postoperative care. Despite all advances in modern medicine and the area of digitalization, as of today, most if not all assessment of abdominal secretions excreted via surgical drains are carried out manually. We here introduce a novel integrated Smart Sensor System ( Smart Drain) that allows for real-time characterization and digitalization of postoperative abdominal drain output at the patient’s bedside. Methods: A prototype of the Smart Drain was developed using a sophisticated spectrometer for assessment of drain output. The prototype measures 10 × 6 × 6 cm and therefore easily fits at the bedside. At the time of measurement with our Smart Drain, the drain output was additionally sent off to be analyzed in our routine laboratory for typical markers of interest in abdominal surgery such as bilirubin, lipase, amylase, triglycerides, urea, protein, and red blood cells. A total of 45 samples from 19 patients were included. Results: The measurements generated were found to correlate with conventional laboratory measurements for bilirubin (r = .658, P = .000), lipase (r = .490, P = .002), amylase (r = .571, P = .000), triglycerides (r = .803, P = .000), urea (r = .326, P = .033), protein (r = .387, P = .012), and red blood cells (r = .904, P = .000). Conclusions: To our best knowledge, for the first time we describe a device using a sophisticated spectrometer that allows for real-time characterization and digitalization of postoperative abdominal drain output at the patient’s bedside.


2021 ◽  
Vol 714 (4) ◽  
pp. 042046
Author(s):  
Jiangping Nan ◽  
Yajuan Jia ◽  
Xuezhen Dai ◽  
Yinglu Liu ◽  
Xiaowen Ren ◽  
...  

2013 ◽  
Vol 718-720 ◽  
pp. 1740-1745
Author(s):  
Tulu Muluneh Mekonnen ◽  
De Ning Jiang ◽  
Yong Xin Feng

Vehicle collision sensor system and reporting accident to police is an electronic device installed in a vehicle to inform police man in case of accident to track the vehicles location. This system works using pressure sensor, GPS and GSM technology. These technology embedded together to sense the vehicle collision and indicate the position of the vehicle or locate the place of accident in order to solve the problem immediately (as soon as possible).For doing so AT89S52 microcontroller is interfaced serially to a GSM modem, GPS receiver, and pressure sensor. A GSM modem is used to send the position (Latitude and Longitude) of the vehicle, the plate of the vehicle and the SMS text from the accident place. The GPS modem will continuously give the data (longitude and latitude) and Load sensor senses the collision of the vehicle against obstacles and input to microcontroller. As load sensor senses the collision, the GSM start to send the plate of the vehicle, text message and the position of the vehicle in terms of latitude and longitude in real time.


Sign in / Sign up

Export Citation Format

Share Document