Optimal sizing of a grid-connected hybrid system for north-west of Iran-case study

Author(s):  
Fatemeh Jahanbani Ardakani ◽  
Gholamhossein Riahy ◽  
Mehrdad Abedi
Author(s):  
Ahad Nejad Ebrahimi ◽  
Farnaz Nazarzadeh ◽  
Elnaz Nazarzadeh

Throughout history, gardens and garden designing has been in the attention of Persian architects who had special expertise in the construction of gardens. The appearance of Islam and allegories of paradise taken from that in Koran and Saints’ sayings gave spirituality to garden construction. Climate conditions have also had an important role in this respect but little research has been done about it and most of the investigations have referred to spiritual aspects and forms of garden. The cold and dry climate that has enveloped parts of West and North West of Iran has many gardens with different forms and functions, which have not been paid much attention to by studies done so far. The aim of this paper is to identify the features and specifications of cold and dry climate gardens with an emphasis on Tabriz’s Gardens.  Due to its natural and strategic situation, Tabriz has always been in the attention of governments throughout history; travellers and tourists have mentioned Tabriz as a city that has beautiful gardens. But, the earthquakes and wars have left no remains of those beautiful gardens. This investigation, by a comparative study of the climates in Iran and the effect of those climates on the formation of gardens and garden design, tries to identify the features and characteristics of gardens in cold and dry climate. The method of study is interpretive-historical on the basis of written documents and historic features and field study of existing gardens in this climate. The results show that, with respect to natural substrate, vegetation, the form of water supply, and the general form of the garden; gardens in dry and cold climate are different from gardens in other climates.


2018 ◽  
Vol 12 (3) ◽  
pp. 181-187
Author(s):  
M. Erkan Kütük ◽  
L. Canan Dülger

An optimization study with kinetostatic analysis is performed on hybrid seven-bar press mechanism. This study is based on previous studies performed on planar hybrid seven-bar linkage. Dimensional synthesis is performed, and optimum link lengths for the mechanism are found. Optimization study is performed by using genetic algorithm (GA). Genetic Algorithm Toolbox is used with Optimization Toolbox in MATLAB®. The design variables and the constraints are used during design optimization. The objective function is determined and eight precision points are used. A seven-bar linkage system with two degrees of freedom is chosen as an example. Metal stamping operation with a dwell is taken as the case study. Having completed optimization, the kinetostatic analysis is performed. All forces on the links and the crank torques are calculated on the hybrid system with the optimized link lengths


Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2589
Author(s):  
Jung J. Kim

This study presents an explosion-resistant hybrid system containing a steel slab and a carbon fiber-reinforced polymer (CFRP) frame. CFRP, which is a high-strength material, acts as an impact reflection part. Steel slab, which is a high-ductility material, plays a role as an impact energy absorption part. Based on the elastoplastic behavior of steel, a numerical model is proposed to simulate the dynamic responses of the hybrid system under the air pressure from an explosion. Based on this, a case study is conducted to analyze and identify the optimal design of the proposed hybrid system, which is subjected to an impact load condition. The observations from the case study show the optimal thicknesses of 8.2 and 7 mm for a steel slab and a ϕ100 mm CFRP pipe for the hybrid system, respectively. In addition, the ability of the proposed hybrid system to resist an uncertain explosion is demonstrated in the case study based on the reliability methodology.


2021 ◽  
Vol 13 (13) ◽  
pp. 7166
Author(s):  
Yukun Zhang ◽  
Songyang Li ◽  
Lifeng Tan ◽  
Jiayin Zhou

The Great Wall of China is more than a wall: it is an extensive cultural route. Pass cities, which are usually large defensive fortresses overseeing an entire fortified area, are an essential part of this heritage and are at the core of the Great Wall’s defense system. Juyong Pass was the closest Pass city to Beijing during the Ming Dynasty when the Great Wall reached its peak. It consisted of five regions—south, east, north, west, and central—that form three fortification levels: core castle, Bao city, and End facility. Based on the Juyong defense area military settlements database, this paper applied spatial analysis methods and found that more than half of the military’s resources for the whole defense area were focused on the western part of the wall, which formed another military core alongside Juyong Pass city. However, the current conservation strategy only focuses on Juyong Pass itself, neglecting the settlements in the western part, thereby destroying the integrity of the Great Wall’s heritage. By clarifying the distribution of cultural heritage in this area, we hope to encourage the preservation of many fortifications according to their authentic historical sphere of control and provide a reference for the sustainable integration of resources along the significant cultural routes of the Great Wall.


Author(s):  
A. Cano ◽  
Paul Arévalo ◽  
F. Jurado

This research compared different sizing methods to improve the current autonomous hybrid system in the Galapagos Islands in 2031, analyzing the loss of power supply probability (LPSP).


Forests ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 827
Author(s):  
Omar Mologni ◽  
Eric D. T. Nance ◽  
C. Kevin Lyons ◽  
Luca Marchi ◽  
Stefano Grigolato ◽  
...  

Cable tensile forces in winch-assist harvesting have been investigated in order to assess the safety concerns of the technology. However, the literature is lacking, particularly in regards to the impact of winch design. In this study, a Summit Winch Assist tethering a feller-director on ground slopes up to 77% was monitored for four days. The cable tensile forces were simultaneously recorded at the harvesting and anchor machine at a frequency of 100 Hz. Cameras and GNSS devices enabled a time study of the operations and the recording of machine positions. Winch functionality and design were disclosed by the manufacturer and used for the interpretation of the results. The cable tensile forces reached 296 kN at the harvesting machine and 260 kN at the anchor machine. The slow negotiation of obstacles while moving downhill recorded the highest peaks, mainly due to threshold settings of the winch in the brake system activation. Lower but significant peaks were also recorded during stationary work tasks. The peaks, however, were limited to a few events and never exceeded the endurance limit of the cable. Overall, the study confirmed recent findings in cable tensile force analysis of active winch-assist operations and provided evidence of the underlaying mechanisms that contribute to cable tensile forces.


2021 ◽  
pp. 102346
Author(s):  
Tamal Chowdhury ◽  
Hemal Chowdhury ◽  
Samiul Hasan ◽  
Md Salman Rahman ◽  
Muhammad Mostafa Kamal Bhuiya ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document